Dryer
FFRG1001PW
8 Dry Cycles
7.0 Cu. Ft. D.O.E. Gas
Product Dimensions
Height 42-1/2"
Width 27"
Depth 29"
More Easy To Use Features
4 Timed Dry Cycles
4 Temperature Selections
Chime On/O Alert
Available in:
Classic
White
(W)
* Select Models. Based on 7.0 cu. ft. capacity on 36"
installation platform.
Signature Features
Ultra-Capacity Dryer*
Largest capacity lets you do the most
laundry in the least amount of time.
Ready-Select®
Controls
Easily select options with the touch
of a button.
Wrinkle Release
Technology
This option features a Wrinkle Release
System that finishes by tumbling
without heat, preventing wrinkles, so
your clothes look great every time
Reversible Door
Choose which direction you want
the door to open to accommodate
your space.
frigidaire.com
CB
A
Features
Total Capacity D.O.E. (Cu. Ft.)
Controls
Dryer Drum Interior
Interior Light
Framed Glass Window Door
DrySense™ Technology
Wrinkle Release Technology
TimeWise® Technology
Moisture Sensor
Estimated Time Remaining
Cycle Status Lights
Cycle Signal
Cycle Signal “On/O ”
Control Lock
Start / Pause / Cancel Knobs
Delay Start
Tumble Speed (RPM)
Reversible Door
Lint Screen
Sound Package
Adjustable Leveling Legs
7.0
Ready-Select®
Painted Steel
Yes
Yes
Chime
Yes
Yes
50
Yes
Yes
4
Cycles
Dry Cycles
Specialty Cycles
8
0
Options
Temperature Selections
Dryness Level Selections
Timed Dry
Energy Saver Option
4
0
15, 30, 60, 90
Optional Accessories
Mobile Home Installation Kit
LP Gas Conversion Kit
Drying Rack
PN # 137067200
PCK4200
PN #
PN # 137067300
Certifications
NSF® Certified
Specifications
Maximum Exhaust Duct Length1 (Ft.)
Gas Connection
Power Cord Location
Voltage Rating
Connected Load (kW Rating) @ 120 Volts
Amps @ 120 Volts
Heating Element (BTU / Hr.)
Shipping Weight (Approx.)
1
Rigid metal duct preferred, semi-rigid optional and allow deductions for
elbows and vents. Refer to Installation Guide on web for additional information.
2
For use on adequately wired 120V, dedicated circuit having 2-wire service
with a separate ground wire. Appliance must be grounded for safe operation.
64
Rear
Rear
120V / 60Hz / 15A
2
4.0
9.0
20,000
143 Lbs.
FFRG1001PW 7.0 Cu. Ft. D.O.E. Gas
NOTE: For planning purposes only. Always consult local and national
electric, gas and plumbing codes. Refer to Product Installation Guide
for detailed installation instructions on the web at frigidaire.com.
Product Dimensions
A - Height
B - Width
C - Depth
Dryer
42-1/2"
27"
29"
•
USA
10200 David Taylor Drive
•
CANADA
FFRG1001P 10/13 © 2013 Electrolux Home Products, Inc.
5855 Terry Fox Way
•
Charlotte, NC 28262
•
Mississauga, ON L5V 3E4
•
1-800-FRIGIDAIRE
•
1-800-265-8352
•
frigidaire.com
•
frigidaire.ca
Accessories information available
on the web at frigidaire.com
Specifications
subject to change.
Dryer
Recess or Closet Installation
Dryer requires 0" minimum installation clearance
around sides and back of unit. To achieve 0" minimum
rear clearance, dryer MUST be vented straight back.
Closet installation requires additional 1" minimum
clearance between front of unit and vented door. Door
MUST be vented with 120 sq. in. minimum louvered
opening, equally divided, located 3" from top and
bottom of door. A louvered door with equivalent air
openings for full-length of door is acceptable.
Air openings MUST remain unobstructed with door
installed. For additional installation details, refer to
Product Installation Guide on web.
29"
50"
Side
Reversible
Door Swing
Vented door
0" min. 1"
min.
Side
60"
sq. in.
min.
3"
60"
sq. in.
min.
3"
0" min. 0" min.
23"
min.
Front
27"
38
1
/2"
42
1
/2"
Front
120V Power cord
(rear) - 60" long
13
1
/2"
3
3
/4"
3
3
/4"
Gas supply pipe (rear)
Rear vent
1
5
/8"
FFRG1001PW 7.0 Cu. Ft. D.O.E. Gas
Top Load Dryer Specifications
• Product Shipping Weight (approx.) – 143 Lbs.
• Designed for HOME USE only, not recommended for commercial
application.
• Always consult local and national electric & gas codes.
• Electrical supply with grounded three-prong receptacle is required.
Power supply circuit must be installed in accordance with current
edition of National Electrical Code (ANSI/NFPA 70) and local codes
& ordinances. (Do not use same circuit as washer.)
• Gas supply line should be 1/2" black iron, stainless steel, or plastic-
coated brass pipe and MUST have individual shutoff valve, located
within 6 feet of dryer. Gas supply line must be installed in accordance
with current edition of National Fuel Gas Code (ANSI Z223.1) and
local codes & ordinances.
• Voltage Rating – 120V / 60 Hz / 15 Amps
• Amps @ 120 Volts = 9.0 Amps
• Connected Load (kW Rating) @ 120 Volts = 4.0 kW
• Equipped with 120V 3-wire power supply cord, approx. 60" long.
• Dryer can be installed in recess or closet requiring 0" minimum
installation clearance around sides and back of unit. To achieve
0" minimum rear clearance, dryer MUST be vented straight back.
Closet installation requires additional 1" minimum clearance between
front of unit and vented door. Door MUST be vented with 120 sq. in.
minimum louvered opening, equally divided, located 3" from top and
bottom of door. A louvered door with equivalent air openings for fulllength of door is acceptable. Air openings MUST remain unobstructed
with door installed. (For additional installation details, refer to Product
Installation Guide on web.)
•
USA
10200 David Taylor Drive
•
CANADA
FFRG1001P 10/13 © 2013 Electrolux Home Products, Inc.
5855 Terry Fox Way
•
Charlotte, NC 28262
•
Mississauga, ON L5V 3E4
•
1-800-FRIGIDAIRE
•
1-800-265-8352
• Do NOT install in area exposed to dripping water or outdoor weather
conditions; where gasoline or other flammables are kept or stored; or
where dryer comes in contact with curtains, drapes or anything that
will obstruct flow of combustion and ventilation air.
• For garage installation, dryer MUST be located minimum 18" above floor.
• Floor MUST be solid with 1" maximum slope. Do NOT install on
carpeted surface.
• Dryer MUST exhaust to outside of building, NOT into any concealed
space.
• Exhaust installation requires minimum 4"-diameter rigid or semi-rigid
metal duct with approved, unobstructed vent hood having swing-out
damper(s). If installing rigid metal duct (preferred), do not exceed
MAXIMUM venting run length of 64 ft., allow deductions for elbows
and vents. If installing semi-rigid metal duct, do not exceed MAXIMUM
venting run length of 8 ft., always allow deductions for elbows and
vents. (Refer to Product Installation Guide on web for additional
information.) Do NOT use flexible plastic or metal foil duct and use
shortest run possible.
• Leveling legs supplied to level dryer properly and reduce excessive
noise and vibration.
•
frigidaire.com
•
frigidaire.ca
• For manufactured or mobile home installation optional Mobile Home
Installation Kit (PN # 137067200) required. (For specific installation
details, refer to Product Installation Guide on web.)
Note: For planning purposes only. Refer to Product Installation Guide
on the web at frigidaire.com for detailed instructions.
Optional Accessories
• Mobile Home Installation Kit – (PN # 137067200).
• LP Gas Conversion Kit – (PN # PCK4200).
• Drying Rack – (PN # 137067300).
Specifications
Specifications
subject to change.
subject to change.
Loading...