
High-Efficiency Laundry Centers
FFLE4033Q T / W
3.8 Cu. Ft. Washer D.O.E.
5.5 Cu. Ft. Dryer D.O.E.
Electric
Product Dimensions
Height 77"
Width 27"
Depth 31-1/2"
More Easy To Use Features
ENERGY STAR®
Save energy, save time. In order to save
energy, the washer extracts more water
from clothes during the spin cycle,
reducing the drying time.
Classic Slate
Now available in a new modern color,
Classic Slate, to bring a new look to your
laundry space at home.
9 Wash Cycles
Features 9 multiple wash cycles to
meet all of your washing needs such as
delicate, comforter, bedding and casual.
9 Drying Cycles
Offers 9 drying cycles to meet all of your
drying needs including Cotton/Towels,
Refresh, Delicates and Heavy-Duty.
3
Signature Features
Super Capacity
Fit more in every load. Wash and dry
3 days of laundry at once with our
3.8cu. ft. HETL washer1.
Super Eciency
Strong, efficient cleaning performance,
every time, with our high efficiency
washer with stainless steel tub.
Super Speed
Get your laundry done sooner. Quick
wash and dry in only 45 minutes2.
Super Gentle
Whiter whites, brighter colors, and fewer
allergens with advanced rinse cycle
technology that uses fresh water.
Refresh Cycle
Reduce wrinkles with the refresh cycle
for those times when your clothes finish
drying before you need them.
Moisture Sensor
Dries your clothes more precisely by
sensing the moisture, reducing wrinkles.
Timed Dry Cycle
Select your desired drying time limit that
works with your schedule.
Fabric Softener Dispenser
No more waiting for the rinse cycle,
with the fabric softener dispenser that
automatically dispenses fabric softener
during the cycle.
ENERGY STAR®
Available in:
Classic
Slate
(T)
1
Based upon an estimated 5 lbs. of laundry per day
for a family of three. Actual load weight may vary
with a maximum of 15 lbs. per load.
2
Based on AHAM standard for 8 lb. load for various
load compositions when Quick Cycle is selected.
3
Select model only.
Classic
White
(W)
frigidaire.com

Washer Features
Washer Type
Total Capacity D.O.E. (Cu. Ft.)
Controls
Washer Interior
Vibration Control System
Suspension System
Wash System
Fresh Water Rinse
Automatic Temperature Control
Water Level Adjustments
Bleach Dispenser / Detergent Dispenser
Fabric Softener Dispenser
Cycle Signal
Cycle Signal “On/O ”
Agitate Speeds (Strokes / Min.)
Spin Speeds (RPM)
HE Top Load
3.8
Ready-Select®
Stainless Steel
Yes
Yes
Yes
Yes
Yes / No
Yes
Yes
Yes
Variable
850
Wash Cycles
Wash Cycles / Specialty Cycles
9 / 0
Washer Options
Temperature Selections
Water Levels
Energy Saver Option
5
Automatic
Yes
Dryer Features
Total Capacity D.O.E. (Cu. Ft.)
Dryer Drum Interior
Interior Light
Wrinkle Release Technology
DrySense™ Technology
Moisture Sensor
Cycle Signal
Cycle Signal “On/O ”
Tumble Speed (RPM)
Lint Screen
5.5
Stainless Steel
Yes
Yes
Yes
Yes
50
Yes
Dry Cycles
Dry Cycles / Specialty Cycles
9 / 0
Dryer Options
Temperature Selections
Dryness Level Selections
Timed Dry (Minutes)
4
0
60, 90
Optional Accessories
Mobile Home Installation Kit
Drying Rack
PN # 137067200
PN # DRLC
Certifications
ENERGY STAR®
NSF® Certified
Yes
Specifications
Maximum Exhaust Duct Length1 (Ft.)
Power Supply Connection Location
Water Inlet Connection Location
Voltage Rating
Connected Load (kW Rating) @ 240 Volts
Amps @ 240 Volts
Heating Element @ 240 Volts (Watts)
Shipping Weight (Approx.)
1
Rigid metal duct preferred, semi-rigid optional and allow deductions for
elbows and vents. Refer to Installation Guide on web for additional information.
56
Middle Rear
Middle Rear
240V / 60Hz / 30A
5.1
22
4,500
275 Lbs.
High-Efficiency Laundry Centers
FFLE4033Q T / W Electric
NOTE: For planning purposes only. Always consult local and national
electric and plumbing codes. Refer to Product Installation Guide on the
web at frigidaire.com for detailed installation instructions.
Product Dimensions
A - Height
B - Width
C - Depth
Depth with Door Open 90°
77"
27"
31-1/2"
47-1/2"
•
USA
10200 David Taylor Drive
•
CANADA
FFLE4033Q 06/15 © 2015 Electrolux Home Products, Inc.
5855 Terry Fox Way
•
Charlotte, NC 28262
•
Mississauga, ON L5V 3E4
•
1-800-FRIGIDAIRE
•
1-800-265-8352
•
frigidaire.com
•
frigidaire.ca
Accessories information available
on the web at frigidaire.com
Specifications
subject to change.

55
3/4"
Side
47
1/2"
31
1/2"
38"
Alcove or Closet
Installation
Unit requires 0" minimum installation
clearance around sides and back of unit.
To achieve 0" minimum rear clearance,
unit MUST be vented straight back. Closet
installation requires additional 1" minimum
clearance between front of unit and vented
door. Door MUST be vented with 120 sq. in.
minimum louvered opening, equally
divided, located 3" from top and bottom
of door. A louvered door with equivalent
air openings for full-length of door is
acceptable. Air openings MUST remain
unobstructed with door installed. For
additional installation details, refer to
Product Installation Guide on web.
0" min. 0" min.
Washer
Dryer
Alcove or Closet Installation
0" min. 1" min.
1"
min.
Vented
closet
door
60"
sq.
in.
60"
sq.
in.
Front
43
1/2"
27"
77"
4" Exhaust
vent (rear)
60" Power cord (rear)
17
5/8"
Drain
hose
retention
clamp
(rear)
23"23"
51
1/2"
Hose
length
beyond
clamp
9
3/8"
H/C Water inlets
(rear) - 48" hose length
High-Efficiency Laundry Centers
FFLE4033Q T / W Electric
High-Efficiency Laundry Center Specifications
• Product Shipping Weight (approx.) – 275 Lbs.
• Designed for HOME USE only, not recommended for commercial
application.
• Single phase 3- or 4-wire cable, 240 Volt, 60 Hertz AC only electrical
supply with ground required on separate circuit fused on both sides
of line.
• Voltage Ratings – 240V / 60Hz / 30A
• Amps @ 240 Volts = 22
• Connected Load (kW Rating) @ 240 Volts = 5.1 kW
• Unit MUST employ a 3-conductor NEMA 10-30 type SRDT or
4-conductor NEMA 14-30 type SRDT or ST (as required), rated at
240 volt AC minimum, 30 amp power supply cord marked for
use with clothes dryers (not supplied).
• Grounding through neutral link prohibited in specific applications and
certain locales, requiring use of 4-wire system. (For detailed electrical
requirements, refer to Product Installation Guide on web.)
• Always consult local and national electric & plumbing codes.
• Can be installed in alcove or closet requiring 0" minimum installation
clearance around sides and back of unit. To achieve 0" minimum rear
clearance, dryer MUST be vented straight back. Closet installation
requires additional 1" minimum clearance between front of unit
and vented door. Door MUST be vented with 120 sq. in. minimum
louvered opening, equally divided, located 3" from top and bottom
of door. A louvered door with equivalent air openings for full-length
of door is acceptable. Air openings MUST remain unobstructed with
door installed. (For additional installation details, refer to Product
Installation Guide on web.)
• Do NOT install in area exposed to dripping water or outdoor weather
conditions; where gasoline or other flammables are kept or stored; or
where dryer comes in contact with curtains, drapes or anything that
will obstruct flow of combustion and ventilation air.
• For garage installation, dryer MUST be located minimum 18" above floor.
• Floor MUST be solid with 1" maximum slope. Do NOT install on
carpeted surface.
• Dryer MUST exhaust to outside of building, NOT into any concealed
space.
•
USA
10200 David Taylor Drive
•
CANADA
FFLE4033Q 06/15 © 2015 Electrolux Home Products, Inc.
5855 Terry Fox Way
•
Charlotte, NC 28262
•
Mississauga, ON L5V 3E4
•
1-800-FRIGIDAIRE
•
1-800-265-8352
•
frigidaire.com
•
frigidaire.ca
• Exhaust installation requires minimum 4"-diameter rigid or semi-rigid
metal duct with approved, unobstructed vent hood having swing-out
damper(s). If installing rigid metal duct (preferred), do not exceed
MAXIMUM venting run length of 56 ft., allow deductions for elbows
and vents. If installing semi-rigid metal duct, do not exceed MAXIMUM
venting run length of 8 ft., always allow deductions for elbows and
vents (Refer to Product Installation Guide on web for additional
information). Do NOT use flexible plastic or metal foil duct and use
shortest run possible.
• Flush-to-wall installation allows for 4-way exhausting — straight back,
down, left and right. While vertical exhausting is acceptable, certain
circumstances could affect dryer’s performance; and unit will be
positioned 4-1/2" from wall. (Flush-to-wall exhausting may be done
by going below dryer, then sideways.)
• H/C water faucets MUST be installed within 42" of washer’s water
inlet and MUST be 3/4" with threading for laundry hose connection
to connect to 48" inlet hoses.
• Water pressure MUST be between 10 and 120 psi with NOT more
than 10 psi pressure difference between hot and cold.
• Drain standpipe requires diameter of 1-1/4" min. and height of
33" min. / 65" max. above floor, capable of eliminating 17 gallons
per minute. Attached 52" drain hose can reach 65"-high standpipe.
• Leveling legs supplied to level dryer properly and reduce excessive
noise and vibration.
• For manufactured or mobile home installation optional Mobile Home
Installation Kit (PN # 137067200) required. (For specific installation
details, refer to Product Installation Guide on web.)
Note: For planning purposes only. Refer to Product Installation Guide
on the web at frigidaire.com for detailed instructions.
Optional Accessories
• Mobile Home Installation Kit – (PN # 137067200).
• Drying Rack – (PN # DRLC).
Specifications
subject to change.