Frigidaire FFGW2415QW, FFGW2415QS Specification Sheet

Drop-In Cooktop
Single Wall Ovens
FPEC3085K S
FFGW2415Q S/ W/B
30" Electric
24" Gas
Product Dimensions
Height 38-7/16"
Width 23-7/8"
More Easy-To-Use Features
Attractive Stainless Steel Exterior
A.D.A. Compliant
When properly installed, this model is A.D.A.-qualified based on the United States Access Board’s A.D.A./A.B.A. Accessibility Guidelines and the Department of Justice’s 2010 A.D.A. Standards for Accessible Design.
Available in:
Stainless
(S)
1
White
(W)
Black
(B)
Signature Features
Vari-Broil™ Temperature Control
Allows you to choose between two heat levels.
Built with American Pride
Designed, enginereed and assembled in the U.S.A.
Ready-Select® Controls
Easily select options or control cooking temperature with our easy-to-use controls.
Dual Radiant™ Baking and Roasting
1  
Select models only.
frigidaire.com
Features
Oven Control / Timing System
Window
Exterior Door Finish
Handle Design
Oven Cleaning System
Drawer Functionality
Ready-Select®
Large
Stainless Steel (S), Color-Coordinated (W/B)
Stainless Steel (S), Color-Coordinated (W/B)
Manual Clean
Broil Drawer
Oven Controls
Bake / Broil
Convection Conversion
Convection Bake / Broil / Roast
Quick Bake Convection
PowerPlus® / Quick Preheat
Keep Warm
Add-a-Minute
Delay Start
Self-Clean
Rapid / Quick Clean Option
Delay Clean
Kitchen Timer
Timed Cook Option
Control Lock
Auto Oven Shut-O
Oven Lock-Out
Yes / Variable (Hi - Lo)
Yes
Oven Features
Capacity (Cu. Ft.)
Convection System
Oven Light
Hidden Bake Element
Rack Configuration
Baking System
Broiling System
Bake / Broil Element (BTU)
3.3
1 Halogen
2 Standard
Vari-Broil™ High/Low
14,000 / 14,000
Certifications
A.D.A. Compliant
1
Yes
Optional Accessories
LP Gas Conversion Kit
Porcelain Broiler Pan and Insert
Included
Included
Specifications
Oven Interior ( H x W x D )
Power Supply Connection Location
Gas Supply Connection Location
Voltage Rating
Connected Load (kW Rating) @ 120 Volts
Amps @ 120 Volts
Minimum Circuit Required (Amps)
Approved for Under-Counter Installation
Shipping Weight (Approx.)
1 
When properly installed, this model is A.D.A.-qualified based on the United States Access Board’s A.D.A./A.B.A. Accessibility Guidelines and the Department of Justice’s 2010 A.D.A. Standards for Accessible Design.
2
For use on adequately wired 120V, dedicated circuit having 2-wire service with a separate ground wire. Appliance must be grounded for safe operation.
2
16" x 18-1/2" x 18-1/2"
Right Bottom Rear
Right Bottom Rear
120V / 60Hz
.60
5.0
15
150 Lbs.
Single Wall Ovens
FFGW2415Q S/W/B 24" Gas
B
A
NOTE: For planning purposes only. Always consult local and national electric and gas codes. Refer to Product Installation Guide for detailed installation instructions on the web at frigidaire.com.
Product Dimensions
A - Height
B - Width
C - Depth
D - Height (Wrapper)
E - Width (Wrapper)
Depth with Door Open 90˚
38-7/16"
23-7/8"
25-3/8"
37-3/8"
21-11/16"
46-5/8"
E
D
Height adjuster
C
Cutout Dimensions
Height (Min.)
Height (Max.)
Width (Min.)
Depth (Min.)
37-1/2"
38"
22"
23-1/2"
USA
10200 David Taylor Drive
CANADA
FFGW2415Q 03/16 © 2016 Electrolux Home Products, Inc.
5855 Terry Fox Way
Charlotte, NC 28262
Mississauga, ON L5V 3E4
1-800-FRIGIDAIRE
1-800-265-8352
frigidaire.com
frigidaire.ca
Accessories information available
on the web at frigidaire.com
Specifications
subject to change.
11/16"
7
23
/8"
21
37
3/8"
Power
38
7/16"
supply location (left bottom
Height
rear)
adjuster
Allow at
1
/4"
least 21
clearance for door
233/8"
253/8"
depth when open
Alternate Installation Oven can also be installed into an existing two-cavity oven cutout
opening measuring 42
1/8" H x 22
1/2" W. To accommodate opening for smaller oven, filler strips need to be installed vertically on each side of opening along with two standard 2 x 4s (22" minimum length), installed upright on each side beneath oven’s side rails, flush with cabinet front. Two height adjusters, located on bottom sides of oven wrapper, must also be lowered to raise oven by 1". Oven’s bottom trim with then overlap cabinet face 1/4" min. to hide opening at bottom.
To accommodate existing 37 adjusters can be lowered to raise oven by 1" in addition to bottom
1
trim’s
/2" overhang allowing for a 1
1/2" to 39" cutout height, oven’s height
1/2" total height adjustment.
1 min.
37
min. 38"
max.
10
min.
27
max.
1/2"
1/2"
1/2"
Single Wall Ovens
FFGW2415Q S/W/B 24" Gas
24"
min.
23
22"
Hole for electrical cord
"
1/2" min.
11/2" Dia.
hole for gas
hookup
C
L
20"
2"min.
Bottom cutout edge must be finish cut
Full base required to support 150 lbs.
7
5/8"
Electrical outlet location
10"
min.
27
1/2"
max.
Single Wall Oven Specifications
Product Shipping Weight (approx.) – 150 Lbs.
Voltage Rating – 120V / 60 Hz / 15 Amps
Connected Load (kW Rating) @ 120 Volts = .60 kW (For use on adequately wired 120V, dedicated circuit having 2-wire service with a separate ground wire. Appliance must be grounded for safe operation.)
Amps @ 120V = 5 Amps
Always consult local and national electric and gas codes.
Oven ships with 3/4" factory regulator.
LP Gas convertible.
Do not obstruct flow of combustion air at oven vent nor around base or beneath lower front panel of appliance. Oven requires fresh air for proper burner combustion.
Oven vent location should be a minimum 36" height above floor.
Minimum 21-1/4" clearance for oven door depth when open.
Full oven base of solid plywood or similar material required, capable of supporting 150 Lbs.
Base must be level and cabinet front must be square.
Single Wall Oven is NOT approved to be used in side-by-side installation.
Single Wall Oven is NOT approved to be used alone in under-counter installation or in combination with any Frigidaire® Warmer Drawer or Built-In Microwave Oven.
USA • 10200 David Taylor Drive • Charlotte, NC 28262 • 1-800-FRIGIDAIRE • frigidaire.com
CANADA
FFGW2415Q 03/16 © 2016 Electrolux Home Products, Inc.
5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • frigidaire.ca
Alternate Installations
Oven can also be installed into an existing two-cavity oven cutout opening measuring 42-1/8" H x 22-1/2" W. To accommodate opening for smaller oven, filler strips need to be installed vertically on each side of opening along with two standard 2 x 4s (22" minimum length), installed upright on each side beneath oven’s side rails, flush with cabinet front. Two height adjusters, located on bottom sides of oven wrapper, must also be lowered to raise oven by 1". Oven’s bottom trim will then overlap cabinet face 1/4" minimum to hide opening at bottom.
To accommodate existing 37-1/2" to 39" cutout height, oven’s height adjusters must be lowered to raise oven by 1" in addition to bottom trim’s 1/2" overhang allowing for a 1-1/2" total height adjustment.
Note: For planning purposes only. Refer to Product Installation Guide
on the web at frigidaire.com for detailed instructions.
Accessories information available
on the web at frigidaire.com
Specifications
subject to change.
Loading...