FRIGIDAIRE FFGS3025PB User Manual
Drop-In Cooktop
Slide-In Ranges
FPEC3085K S
FFGS3025P S / W / B
30" Electric30" Gas
Product Dimensions
Height (Max.) 36-5/8"
Width 30"
Depth 28-5/16"
More Easy-To-Use Features
Extra-Large Window
Check on the status of your dish without
having to open the oven door.
Built with American Pride
Appliances that are high-performing,
more accessible, and more innovative than
ever — designed, built, and engineered in the
U.S.A.
Ready-Select® Controls
Easily control your cooking temperature
with our easy-to-use controls.
Sealed Gas Burners
Enjoy easier cleanup and a burner that
stays looking great.
Store-More™ Storage Drawer
With the Store-More™ Storage Drawer,
you will have extra space to store your
cookware.
Signature Features
Large Capacity
Our large capacity oven gives you
room to cook more at once.
One-Touch Self Clean
Our one-touch self-cleaning button
gives you a clean oven at the touch
of a button.
Even Baking Technology
Our even baking technology ensures
even baking every time.
Continuous Grates
Continuous Grates make it easy to move
heavy pots and pans between burners
without lifting.
Matte Black Finish with Cast Iron
Grates
A premium finish to complement the
durable burner grates.
Oven Rack Handles
Oven racks are designed with space for
you to easily pull out the racks, even
when wearing an oven mitt.
A.D.A. Compliant
When properly installed, this model is
A.D.A.-qualified based on the United
States Access Board’s A.D.A./A.B.A.
Accessibility Guidelines and
the Department of Justice’s
2010 A.D.A. Standards for
Accessible Design.
Available in:
Stainless
(S)
Burners
Right Front
Right Rear
Left Front
Left Rear
White
(W)
Black
(B)
BTU
15,000
5,000
9,500
9,500
frigidaire.com
Features
B
A
Extreme
protrusion
C
Oven Control / Timing System
Surface Type
Sealed Gas Burners
Grates
Window
Exterior Door Finish
Handle Design
Exterior Finish (Side Panels)
Convection System
Oven Cleaning System
Drawer Functionality
Oven Controls
Bake
Broil
Add-a-Minute
Delay Start
Self Clean / Clean Options
Steam Clean
Delay Clean
Kitchen Timer
Timed Cook Option
Auto Oven Shut-O
Cooktop Features
Right Front Burner (BTU)
Right Rear Burner (BTU)
Left Front Burner (BTU)
Left Rear Burner (BTU)
Center Extra Zone Burner (BTU)
Oven Features
Capacity (Cu. Ft.)
Oven Light
Rack Configuration
Even Baking System
Broiling System
Bake Burner / Broil Burner (BTU)
Optional Accessories
Rear Filler Kit – Stainless Steel (S) /
White (W) / Black (B)
Side Panel Kit – Stainless Steel (S) /
White (W) / Black (B)
Backguard Kit – Stainless Steel (S) /
White (W) / Black (B)
Side Trim Kit – Stainless Steel (S) /
White (W) / Black (B)
Certifications
A.D.A. Compliant
Sabbath Mode (Star-K® Certified)
1
Specifications
Oven Interior ( H x W x D )
Power / Gas Supply Conn. Location
LP Gas Conversion Kit
Voltage Rating
Connected Load
(kW Rating) @ 120 Volts
Amps @ 120 Volts
Shipping Weight (Approx.)
2
Ready-Select® Controls
Deep-Well Black Porcelain ( S ),
Deep-Well Color-Coordinated
Porcelain ( W / B )
Yes
Continuous Cast Iron
with Black Matte Finish
Extra-Large
Stainless Steel ( S ),
Color-Coordinated ( W / B )
Stainless Steel ( S ),
Color-Coordinated ( W / B )
Black ( S ),
Color-Coordinated ( W / B )
Self-Clean
Storage
Yes
Low and High
Yes
Yes/2, 3 Hours
2, 3 Hours (Scroll Thru)
Yes
Yes
12 Hours
15,000
5,000
9,500
9,500
4.5
1
2 Handle Racks
Yes
Vari-Broil™ Hi / Lo
18,000 / 11,500
(S) PN # 901193-901S
(W) PN # 901193-9011
(B) PN # 901193-9010
(S) PN # 903074-901S
(W) PN # 903074-9011
(B) PN # 903074-9010
(S) PN # 903046-901S
(W) PN # 903046-9011
(B) PN # 903046-9010
(S) PN # 903075-901S
(W) PN # 903075-9011
(B) PN # 903075-9010
Yes
17-1/2" x 24-1/8" x 18-3/4"
Left / Right Bottom Rear
Included
120V / 60 Hz / 15A
0.7
15
220 Lbs.
Slide-In Ranges
FFGS3025P S / W / B 30" Gas
NOTE: For planning purposes only. Always consult local and national electric and gas codes.
Refer to Product Installation Guide for detailed installation instructions on the web at frigidaire.com.
Product Dimensions
A - Height (Min. / Max.)
B - Width
C - Depth
Depth with Door Open 90˚
35-7/8" / 36-5/8"
30"
28-5/16"
47-9/16"
1
When properly installed, this model is A.D.A.-qualified based on the
United States Access Board’s A.D.A./A.B.A. Accessibility Guidelines and
the Department of Justice’s 2010 A.D.A. Standards for Accessible Design.
2
For use on adequately wired 120V, dedicated circuit having
2-wire service with a separate ground wire. Appliance must be
grounded for safe operation.
Cutout Dimensions
Height (Min. / Max.)
Width (Min. / Max.)
Depth (Min. / Max.)
*Cutout and countertop cutout width should match.
**24" with optional backguard installed.
Accessories information available
35-7/8" / 36-5/8"
29-15/16" / 30-1/16" *
21-3/4" / 22-1/8" **
on the web at frigidaire.com
•
USA
10200 David Taylor Drive
•
CANADA
FFGS3025P 10/14 © 2014 Electrolux Home Products, Inc.
5855 Terry Fox Way
•
Charlotte, NC 28262
•
Mississauga, ON L5V 3E4
•
1-800-FRIGIDAIRE
•
1-800-265-8352
•
frigidaire.com
•
frigidaire.ca
Specifications
subject to change.
30" Gas Slide-In Range
Baseline
Slide-In Ranges
FFGS3025P S / W / B 30" Gas
Slide-In Range Specifications
•
Product Shipping Weight (approx.) – 220 Lbs.
•
Voltage Rating – 120V / 60 Hz / 15 Amps
•
Connected Load (kW Rating) @ 120 Volts = 0.7 kW
(For use on adequately wired 120V, dedicated circuit having 2-wire
service with a separate ground wire. Appliance must be grounded
for safe operation.)
•
Amps @ 120V = 15 Amps
•
Always consult local and national electric and gas codes.
•
Make sure wall coverings around range can withstand heat generated
by range.
•
Linoleum or any other synthetic floor covering located beneath range,
must be capable of withstanding minimum heat of 90° F above room
temperature without shrinking, warping or discoloring. Insulating pad
or 1/4"-thick plywood required between range and a carpeted floor.
•
Do not obstruct flow of combustion air at oven vent nor around base
or beneath lower front panel of range. Range requires fresh air for
proper burner combustion.
•
Range ships with 3/4" factory regulator.
•
LP Gas Conversion Kit supplied.
•
Gas supply line can enter cabinet through back wall or floor.
Recommended position for gas supply line is located 7" from left
cabinet wall and 2" from floor. Electrical outlet can be located
anywhere on the back wall 2" from either side wall and 12" from floor.
Supply line must be equipped with approved manual shutoff valve,
accessibly located in same room as range.
•
Countertop MUST be level in all directions and adjustable range
height at least 1/16" greater than tallest cabinet height, to ensure
metal rangetop flange will fit properly on countertop edge.
•
When installing optional Backguard Kit, cutout depth of 21-3/4"
minimum / 22-1/8" maximum needs increased to 24".
•
Overhead cabinetry should not exceed a 13" maximum depth.
•
Absolute minimum horizontal distance between overhead cabinets
installed to either side of appliance must be no less than maximum
width of appliance.
•
Allow 24" minimum clearance between rangetop and bottom of cabinet
when bottom of wood or metal cabinet is protected by not less than 1/4"
flame-retardant millboard covered with not less than No. 28 MSG sheet
steel, 0.015" stainless steel, 0.024" aluminum or 0.020" copper. Allow 30"
minimum clearance when cabinet is unprotected.
•
Allow 5" minimum clearance from edge of rangetop to nearest
combustible wall on either side of unit.
•
To reduce risk of fire when using overhead cabinetry, install range
hood that projects horizontally a recommended minimum of 5" beyond
bottom of cabinets.
Countertop Preparation
Rangetop’s side flanges overlap countertop cutout edges – for detailed
preparation instructions, refer to product installation guide on the web.
•
Flat Square-Finish Countertops – require no preparation since
rangetop’s flange lays directly on countertop edge.
•
Formed Front-Edged Countertops – require front molded edge to
be shaved flat 3/4" from each front corner of opening.
•
Tile Countertops – may need trim cut back 3/4" from each front corner
of opening and /or rounded edge flattened.
•
For existing cutout width greater than 30-1/16" reduce the 3/4" overlap
dimension; for cutout width of 29", replace actual side
trim panels with smaller side trim panels, available with optional
Side Trim Kit (refer to detailed kit installation instructions).
Note: For planning purposes only. Refer to Product Installation Guide
on the web at frigidaire.com for detailed instructions.
Optional Accessories
•
Rear Filler Kit: Stainless Steel – (PN # 901193-901S),
White – (PN # 901193-9011), Black – (PN # 901193-9010).
•
Side Panel Kit: Stainless Steel – (PN # 903074-901S),
White – (PN # 903074-9011), Black – (PN # 903074-9010).
•
Backguard Kit: Stainless Steel – (PN # 903046-901S),
White – (PN # 903046-9011), Black – (PN # 903046-9010).
•
Side Trim Kit: Stainless Steel – (PN # 903075-901S),
White – (PN # 903075-9011), Black – (PN # 903075-9010).
•
USA
10200 David Taylor Drive
•
CANADA
FFGS3025P 10/14 © 2014 Electrolux Home Products, Inc.
5855 Terry Fox Way
•
Charlotte, NC 28262
•
Mississauga, ON L5V 3E4
•
1-800-FRIGIDAIRE
•
1-800-265-8352
•
frigidaire.com
•
frigidaire.ca
Specifications
subject to change.
Loading...