Frigidaire FFEF3043LSR, FFEF3043LSP, FFEF3043LSN, FFEF3043LSM, FFEF3013LWK Owner’s Manual

TABLE OF CONTENTS

Important Safety Instructions ...........................3-5

Before Setting Oven Controls ..............................6

Before Setting Surface Controls ........................7-8

Setting Surface Controls (Ceramic cooktop) ..... 9-11

Oven Control Functions (100) ............................12

Setting Oven Controls .................................. 12-15

Care & Cleaning .......................................... 16-19

Before You Call ........................................... 20-21

Major Appliance Warranty .....................back cover

808527503 Rev. B (June 2016)

PRODUCT RECORD AND REGISTRATION

Contents

Product Registration ......................................................2

Important Safety Instructions ............................ 3-5

Before Setting Oven Controls .................................. 6

Removing, replacing & arranging the oven racks ..........6

Before Setting Surface Controls ...........................7-8

About the ceramic cooktop & radiant elements ............. 7

Cookware material types .............................................8

Setting Surface Controls ....................................9-11

Setting single radiant surface elements ........................ 9

Setting dual radiant surface elements ........................ 10

Home canning ......................................................... 11

Oven Control Functions ......................................... 12

Setting Oven Controls ......................................12-15

Setting the clock ...................................................... 12

Changing oven temperature display (F° or C°) ........... 12

Setting minute timer ................................................. 13

Setting bake ............................................................ 13

Setting broil ............................................................. 14

Adjusting oven temperature ...................................... 15

Operating oven light ................................................. 15

Care & Cleaning ................................................16-19

Cleaning recommendation table ................................ 16

Cooktop maintenance & cleaning.......................... 17-18

Cautions for aluminum use ....................................... 18

Replacing the oven light ........................................... 18

Removing & replacing oven door ............................... 19

Before You Call

Solutions to common problems ............................ 20-21

Appliance Warranty ................................. Back Cover

Thank you for choosing Frigidaire.

This Use & Care Guide is part of our commitment to
customer satisfaction and product quality throughout the
service life of your new appliance. We view your purchase
as the beginning of a relationship. To ensure our ability
to continue serving you, please use this page to record
important product information.

Need help??

Visit the Frigidaire web site at www.frigidaire.com

Before you call for service, there are a few things you can
do to help us serve your better.

Read this Use & Care manual.

It contains instructions to help you use and maintain your
range properly.

If you received a damaged range ...

immediately contact the dealer (or builder) that sold you
the range.

Save time and money.

Check the section titled “Before you call”. This section
helps step you through some common problems that
might occur. If you do need service, help is only a phone
call away. Call Frigidaire Customer Services at 1-800-

944-9044.

Product Registration

Registering your product with Frigidaire enhances our
ability to serve you. You can register online at www.
frigidaire.com or by dropping your Product Registration
Card in the mail.

2

Be sure to visit us online at

www.frigidaire.com

for a complete line of accessories.

©2016 Electrolux Home Products, Inc.

Serial plate location

Serial plate location:
open storage drawer (some models) or
remove lower front panel (some models).

Record model & serial numbers here

Purchase date

Model number

Serial number

All rights reserved. Printed in the USA

IMPORTANT SAFETY INSTRUCTIONS

Read all instructions before using this appliance.

Do not attempt to install or operate your appliance until
you have read the safety precautions in this manual.
Safety items throughout this manual are labeled with a
WARNING or CAUTION statement based on the risk type.

Denitions

This is the safety alert symbol. It is used to alert you
to potential personal injury hazards. Obey all safety mes­sages that follow this symbol to avoid possible injury or
death.

WARNING

WARNING indicates a potentially hazardous
situation which, if not avoided, may result in
death or serious injury.

CAUTION

CAUTION indicates a potentially hazardous
situation which, if not avoided, may result in
minor or moderate injury.

Ask your dealer to recommend a qualied technician and

an authorized repair service. Know how to disconnect the
power to the range at the circuit breaker or fuse box in
case of an emergency.

WARNING

Tip Over Hazard

• A child or adult can tip the

range and be killed.

• Verify the anti-tip device has
been installed to oor or wall.

• Ensure the anti-tip device is re-engaged when
the range is moved to oor or wall.

• Do not operate the range without the anti-tip

device in place and engaged.

• Failure to follow these instructions can result in

death or serious burns to children and adults.

Range
leveling leg

Anti-Tip
bracket

IMPORTANT

IMPORTANT indicates installation, operation, maintenance
or valuable information that is not hazard related.

• Remove all tape and packaging before using

the range. Destroy the carton and plastic bags after
unpacking the range. Never allow children to play with
packaging material.

• Proper installation—Be sure your appliance is
properly installed and grounded by a qualied

technician in accordance with the National
Electrical Code ANSI/NFPA No. 70 latest edition
and local electrical code requirements. Install only

per installation instructions provided in the literature
package for this range.

• User servicing—Do not repair or replace any part
of the appliance unless specically recommended

in the manuals. All other servicing should be done

only by a qualied technician. This may reduce the risk

of personal injury and damage to the range.

• Never modify or alter the construction of a range

by removing the leveling legs, panels, wire
covers, anti-tip brackets/screws, or any other
part of the range.

To check if the anti-tip bracket is installed properly,
use both arms and grasp the rear edge of range back.
Carefully attempt to tilt range forward. When properly
installed, the range should not tilt forward.

Refer to the anti-tip bracket installation instructions
supplied with your range for proper installation.

• Remove the oven door from any unused range if

it is to be stored or discarded.

WARNING

Stepping, leaning or sitting on the door or
drawers of a range can result in serious injuries
and also cause damage to the appliance. DO NOT

allow children to climb or play around the range. The
weight of a child on an open oven door may cause the
range to tip, resulting in serious burns or other injury.

Never use your appliance for warming or heating
the room.

Do not use the oven, warmer drawer or lower
oven (if equipped) for storage.

Save these instructions for future reference.

3

IMPORTANT SAFETY INSTRUCTIONS

WARNING

• Storage in or on appliance—ammable materials

should not be stored in an oven, warmer drawer,
near surface units or in the storage drawer.

This includes paper, plastic and cloth items, such
as cookbooks, plasticware and towels, as well as

ammable liquids. Do not store explosives, such as

aerosol cans, on or near the range.

• DO NOT LEAVE CHILDREN ALONE —children

should not be left alone or unattended in the
area where appliance is in use. They should never

be allowed to sit or stand on any part of the appliance,
including the storage drawer, lower broiler drawer,
warmer drawer or lower double oven.

CAUTION

• Do not store items of interest to children in the

cabinets above a range or on the backguard of
the range. Children climbing on the range to reach

items could be seriously injured.

• Do not touch surface heating units or surface

cooking elements, areas near these units or
elements, or interior surface of the oven. Both

surface heating and oven heating elements may be
hot even though they are dark in color. Areas near
surface cooking units may become hot enough to
cause burns. During and after use, do not touch, or

let clothing or other ammable materials touch these
areas until they have had sufcient time to cool.

Among these areas are the cook top, surfaces facing
the cook top, the oven vent openings and surfaces
near these openings, oven door and oven door
window.

• Wear proper apparel—loose-tting or hanging

garments should never be worn while using the
appliance. Do not let clothing or other ammable

materials contact hot surfaces.

IMPORTANT

Do not attempt to operate the range during a
power failure. If the power fails, always turn off the

range. If the range is not turned off and the power
resumes, the range will begin to operate again. Once the
power resumes, reset the clock and oven function.

• Do not use water or our on grease res—
smother the re with a pan lid, or use baking

soda, a dry chemical or foam-type extinguisher.

• When heating fat or grease, watch it closely. Fat

or grease may catch re if allowed to become too hot.

• Use dry potholders - moist or damp potholders on

hot surfaces may result in burns from steam. Do
not let potholders touch hot heating elements. Do not
use a towel or other bulky cloth instead of a potholder.

• Do not heat unopened food containers - buildup

of pressure may cause container to burst and
result in injury.

IMPORTANT INSTRUCTIONS FOR USING
YOUR OVEN

• Use care when opening oven door , lower oven

door or warmer drawer (if equipped)—Stand to
the side of the range when opening the door of a hot
oven. Let hot air or steam escape before you remove or
replace food in the oven.

• Keep oven vent ducts unobstructed. The oven vent
is located under the left rear surface element if your
model is equipped with coil elements. The oven vent
is located below the backguard for models equipped
with ceramic-glass cook tops. Touching the surfaces in
this area when the oven is operating may cause severe
burns. Also, do not place plastic or heat-sensitive items
on or near the oven vent. These items could melt or
ignite.

• Placement of interior oven racks. Always place
oven racks in desired location while oven is cool. If rack
must be moved while oven is hot use extreme caution.
Use potholders and grasp the rack with both hands to
reposition. Do not let potholders contact the hot heating
elements in the oven. Remove all utensils from the rack
before moving.

• Do not use the broiler pan without its insert. The
broiler pan and its insert allow dripping fat to drain
and be kept away from the high heat of the broiler. Do

not cover the broiler insert with aluminum foil.
Exposed fat and grease could ignite.

• Protective liners—Do not use aluminum foil to line the
oven bottom. Only use aluminum foil as recommended
in this manual. Improper installation of these liners may

result in risk of electric shock, or re.

4

IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT INSTRUCTIONS FOR USING

YOUR COOKTOP

• Know which knob controls each surface heating

unit. Place a pan of food on the unit before turning it
on, and turn the unit off before removing the pan.

• Use proper pan size—This appliance is equipped
with one or more surface units of different sizes. Select

utensils having at bottoms large enough to cover the

surface unit heating element. The use of undersized
utensils will expose a portion of the heating element
to direct contact and may result in ignition of clothing.
Proper relationship of utensil to element will also

improve efciency.

• Utensil handles should be turned inward and not

extend over adjacent surface elements—To reduce

the risk of burns, ignition of ammable materials, and

spillage due to unintentional contact with the utensil,
the handle of the utensil should be positioned so that
it is turned inward, and does not extend over adjacent
surface units.

• Never leave surface elements unattended at high

heat settings—Boilovers cause smoking and greasy
spillovers that may ignite, or a pan that has boiled dry
may melt.

• Do not immerse or soak removable heating
elements—Heating elements should never be

immersed in water. Heating elements clean themselves
during normal operation.

• Glazed cooking utensils—Only certain types of
glass, glass/ceramic, ceramic, earthenware, or other
glazed utensils are suitable for cook top service without
breaking due to the sudden change in temperature.
Check the manufacturer’s recommendations for cook top
use.

• When aming foods under a ventilating hood,

turn the fan on.

FOR CERAMIC-GLASS COOK TOP MODELS

• Do not cook on broken cook top—If cook top should

break, cleaning solutions and spillovers may penetrate
the broken cook top and create a risk of electric shock.

Contact a qualied technician immediately.

• Clean cook top with caution—If a wet sponge or
cloth is used to wipe spills on a hot cooking area, be
careful to avoid a steam burn. Some cleaners can
produce noxious fumes if applied to a hot surface.

IMPORTANT INSTRUCTIONS FOR CLEANING

YOUR RANGE

• Clean the range regularly to keep all parts free of

grease that could catch re. Pay particular attention

to the area around each surface element. Do not allow
grease to accumulate.

• Kitchen cleaners and aerosols—Always follow the

manufacturer’s recommended directions for use.
Be aware that excess residue from cleaners and aerosols
may ignite causing damage and injury.

• Clean ventilating hoods frequently—Grease

should not be allowed to accumulate on the hood

or lter. Follow the manufacturer’s instructions for
cleaning hoods.

IMPORTANT SAFETY NOTICE

The California Safe Drinking Water and Toxic Enforcement
Act requires the Governor of California to publish a
list of substances known to the state to cause cancer,
birth defects or other reproductive harm, and requires
businesses to warn customers of potential exposure to
such substances.

5

BEFORE SETTING OVEN CONTROLS

Oven vent location

The oven vent is located under the left side of the
control panel (See Fig. 1). When the oven is on, warm

air passes through this vent. This venting is necessary for
proper air circulation in the oven and good baking results.

Do not block the oven vent.

oven vent location

Fig. 1

Types of oven racks

Your range may be equipped with one or more of the oven
rack styles shown.

at handle

oven rack

Removing, replacing & arranging racks

To remove - pull the rack forward until it stops. Lift up

front of rack and slide out.

To replace - t the rack onto the guides on the oven

walls. Tilt the front of the rack upward and slide the rack
back into place.
Arranging - always arrange the oven racks when the
oven is cool (prior to operating the oven).

CAUTION

Always use oven mitts when using the oven.

When using the appliance, oven racks and cooktop will
become very hot which can cause burns.

at

oven rack

offset
oven rack

The at oven rack or at handle oven rack (some
models) may be used for most cooking needs.

The offset oven rack (some models) is designed to place
the base of the rack about 1/2 of a rack position lower
than normal. This rack design provides several additional
possible locations between the standard positions.

Fig. 2

Recommended rack positions by food type

Food type Position

Broiling meats See broil

Cookies, cakes, pies, biscuits & mufns 2 or 3

Frozen pies, angel food cake, yeast, bread
and casseroles

Small cuts of meat or poultry 1 or 2

Turkey, roast or ham 1

1 or 2

Air circulation in the oven

For best baking results allow 2-4” (5-10 cm) around the
cookware for proper air circulation and be sure pans and
cookware do not touch each other, the oven door, sides or
back of the oven cavity. Hot air must be able to circulate
around the pans and cookware in the oven for even heat
to reach around the food.

6

About the ceramic glass cooktop

The ceramic cooktop has radiant surface elements
located below the surface of the glass. The design of the
ceramic cooktop outlines the area of the surface element
underneath. Be sure to match the pan size with the
diameter of the element outline on the cooktop and only

at-bottomed cookware should be used.

The type and size of cookware, the number of surface
elements in use and their settings are all factors that will
affect the amount of heat that will spread to areas beyond
the surface elements. The areas surrounding the elements
may become hot enough to cause burns.

BEFORE SETTING SURFACE CONTROLS

element ON indicator light

Fig. 1

About the radiant surface elements

The element temperature rises gradually and evenly.
As the temperature rises, the element will glow red. To
maintain the selected setting the element will cycle ON
and OFF. The heating element retains enough heat to
provide a uniform and consistent heat during the off cycle.

For efcient cooking, turn OFF the element several

minutes before cooking is complete. This will allow residual
heat to complete the cooking process.

Element on & hot surface indicator lights

Your appliance is equipped with two different types of
radiant surface control indicator lights that will glow on
the control panel — the on indicator and the hot surface
indicator lights.

The element on indicator light will glow when any surface
element is turned ON. A quick glance at this indicator
light after cooking is an easy check to be sure the surface
controls are turned OFF (See Fig. 1).

The hot surface indicator light will glow when any
surface cooking area heats up and will remain on until
the glass cooktop has cooled to a MODERATE level (See
Fig. 2).

hot surface indicator light

Fig. 2

NOTES

Radiant elements have a limiter that allows the element
to cycle ON and OFF, even at the HI setting. This helps
to prevent damage to the ceramic smoothtop. Cycling at
the HI setting is normal and will occur more often if the
cookware is too small for the radiant element or if the

cookware bottom is not at.

Be sure to read the detailed instructions for ceramic
glass cooktop cleaning in the Care & Cleaning and
Before You Call checklist sections of this Use & Care
Manual.

7

BEFORE SETTING SURFACE CONTROLS

Types of cooktop elements

The ceramic glass cooktop has radiant surface elements
located below the surface of the glass. The patterns on
the ceramic glass will outline the size and type of element
available. The single radiant element will have one round
outline pattern shown. The dual radiant element is exible
because you may set just the smaller inner portion as a
single element or both inner and outer portions can be set
to heat together (See Fig. 1).

Single radiant

surface control

Fig. 1

Dual radiant

surface control

(some models)

Cookware material types

The cookware material determines how evenly and quickly
heat is transferred from the surface element to the pan
bottom. The most popular materials available are:

Aluminum - Excellent heat conductor. Some types of
food will cause it to darken (Anodized aluminum cookware
resists staining & pitting). If aluminum pans slide across
the ceramic cooktop, they may leave metal marks which
will resemble scratches. Remove these marks immediately.

Copper - Excellent heat conductor but discolors easily.
May leave metal marks on ceramic glass (see Aluminum).

Stainless - Slow heat conductor with uneven cooking
results. Is durable, easy to clean and resists staining.

Cast Iron - A slow heat conductor however will retain
heat very well. Cooks evenly once cooking temperature is
reached. Not recommended for use on ceramic cooktops.

Using proper cookware

The size and type of cookware used will inuence the

setting needed for best cooking results. Be sure to follow
the recommendations for using proper cookware as
illustrated in Figs. 2 & 3.

Cookware should have at bottoms that make good

contact with the entire surface heating element (See

Fig. 2). Check for atness by rotating a ruler across the

bottom of the cookware (See Fig. 3). For more information
about the ceramic cooktop see “Cooktop cleaning &
maintenance” in the Care & Cleaning section.

• Curved and warped pan.

• Flat bottom and straight

sides.

• Tight tting lids.

• Weight of handle does

not tilt pan. Pan is well
balanced.

• Pan sizes match the
amount of food to be
prepared and the size
of the surface element.

• Made of a material that
conducts heat well.

• Easy to clean.

• Always match pot

diameter to element
size.

• Pan larger than cooking
area marked on cooktop
by more than one-half
inch or 12mm.

• Heavy handle tilts pan.

• Pan is smaller or larger

than heating area
marked on cooktop.

Fig. 2

Porcelain-enamel on metal - Heating characteristics
will vary depending on base material. Porcelain-enamel
coating must be smooth to avoid scratching ceramic
cooktops.

Glass - Slow heat conductor. Not recommended for
ceramic cooktop surfaces because it may scratch the glass.

8

Fig. 3

Single radiant surface elements (all models)

To operate the single radiant element:

1. Place correctly sized cookware on single radiant
surface element.

2. Push in and turn the surface control knob in either
direction (Fig. 2) to the desired setting (Refer to the

Suggested radiant surface element settings
table Fig. 1). Start most cooking operations on a

higher setting and then turn to a lower setting to nish

cooking. The surface control knobs do not have to
be set exactly on a particular spot. Use the graphics
provided as a guide and adjust the control knob as
needed (See Fig. 2). Each surface element provides
a constant amount of heat at each setting. A glowing
red surface heating area extending beyond the bottom
edge of the cookware indicates the cookware is too
small for the surface heating area.

3. When cooking is complete, turn the radiant surface
element OFF before removing the cookware.

Suggested radiant surface element
settings

The suggested settings found in Fig.1 below are based
when cooking with medium-weight aluminum pans with
lids. Settings may vary when using other types of pans.

Suggested settings for single and dual radiant
elements table

SETTING SURFACE CONTROLS

Fig. 2

CAUTION

Radiant surface elements may appear to have cooled
after they have been turned off. The glass surface
may still be hot and burns may occur if the glass

surface is touched before it has cooled sufciently.

Do not place ammable items such as plastic salt
and pepper shakers, spoon holders or plastic wrappings
on top of the range when it is in use. These items
could melt or ignite. Potholders, towels or wooden

spoons could catch re if placed too close to the surface

elements.

Settings Type of cooking

High (HI - 9) Start most foods, bring water to

a boil, pan broiling

Medium high (7 - 8) Continue a rapid boil, fry, deep

fat fry

Medium (5 - 6) Maintain a slow boil, thicken sauces

and gravies or steam vegetables

Medium Low (2 - 4) Keep foods cooking, poach, stew

Low (LO - 1) Keep warm, melt, simmer

Fig. 1

IMPORTANT

Do not allow aluminum foil, or ANY material that
can melt to make contact with the ceramic glass
cooktop. If these items melt on the cooktop they will

damage the ceramic cooktop.

NOTES

The size and type of utensil used, and the amount and

type of food being cooked will inuence the setting

needed for best cooking results.

The on indicator light will glow when one or more
elements are turned ON. A quick glance at this indicator

light when cooking is nished is an easy check to be

sure all control knobs are turned OFF. The hot surface
indicator light will continue to glow AFTER the control
knob is turned to the “OFF” position and will glow until

the heating surface area has cooled sufciently.

9

SETTING SURFACE CONTROLS

Dual radiant surface elements (some models)

Symbols on the backguard are used to indicate which
coil of the dual radiant element will heat. The symbol
indicates the inner coil only. The symbol indicates both
inner and outer coils will heat.

To operate a dual radiant element:

1. Place correctly sized cookware on dual radiant surface
element.

2. Push in and turn the surface control knob clockwise
to begin heating both the inner and outer portions of
the dual element. If only the inner heating portion is
needed like for smaller cookware, push in and turn the
knob counter-clockwise to start.

3. When cooking is complete, turn the dual radiant
surface element OFF before removing the cookware.

Start most cooking operations on a higher setting and

then turn to a lower setting to nish cooking. The surface

control knobs do not have to be set exactly on a particular
mark. Use the marks as a guide and adjust the control
knob as needed. A glowing red surface heating area
extending beyond the bottom edge of the cookware
indicates the cookware is too small for the surface
heating area.

You may switch from either coil setting at any time during
cooking. See Suggested radiant surface element
settings table on previous page.

Heating with inner (small)

element only

Areas that heat are shown
darkened.

Fig. 1

Heating with both

elements

Fig. 2

CAUTION

Radiant surface elements may appear to have cooled
after they have been turned off. The glass surface
may still be hot and burns may occur if the glass

surface is touched before it has cooled sufciently.

Do not place ammable items such as plastic salt
and pepper shakers, spoon holders or plastic wrappings
on top of the range when it is in use. These items
could melt or ignite. Potholders, towels or wooden

spoons could catch re if placed too close to the surface

elements.

IMPORTANT

Do not allow aluminum foil, or ANY material that
can melt to make contact with the ceramic glass
cooktop. If these items melt on the cooktop they will

damage the ceramic cooktop.

NOTES

The size and type of utensil used, and the amount and

type of food being cooked will inuence the setting

needed for best cooking results.

The on indicator light will glow when one or more
elements are turned ON. A quick glance at this indicator

light when cooking is nished is an easy check to be

sure all control knobs are turned OFF. The hot surface
indicator light will continue to glow AFTER the control
knob is turned to the “OFF” position and will glow until

the heating surface area has cooled sufciently.

10

Home Canning

Be sure to read and observe all the following points when
home canning with your appliance. Check with the USDA
(United States Department of Agriculture) website and
be sure to read all the information they have available as
well as follow their recommendations for home canning
procedures.

• Use only quality at bottom canners when home

canning. Use a straight-edge to check canner bottom
(see “Cookware material types” in the Before setting
surface controls section).

• Use only a completely at bottom canner with no

ridges that radiate from the bottom center when home
canning using a ceramic cooktop.

• Make sure the diameter of the canner does

not exceed 1 inch beyond the surface element
markings or burner. It is recommended to use smaller

diameter canners on electric coil and ceramic glass
cooktops.

SETTING SURFACE CONTROLS

CAUTION

Radiant surface elements may appear to have cooled
after they have been turned off. The glass surface
may still be hot and burns may occur if the glass

surface is touched before it has cooled sufciently.

Do not place ammable items such as plastic salt
and pepper shakers, spoon holders or plastic wrappings
on top of the range when it is in use. These items
could melt or ignite. Potholders, towels or wooden

spoons could catch re if placed too close to the surface

elements.

IMPORTANT

Do not allow aluminum foil, or ANY material that
can melt to make contact with the ceramic glass
cooktop. If these items melt on the cooktop they will

damage the ceramic cooktop.

• Start with hot tap water to bring water to boil more

quickly.

• Use the highest heat seating when rst bringing the

water to a boil. Once boiling is achieved, reduce heat to
lowest possible setting to maintain that boil.

IMPORTANT

NEVER place or straddle a cooking utensil over 2

different surface cooking areas at the same time. This
may cause the ceramic cooktop to fracture.

11

OVEN CONTROL FUNCTIONS

READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN.

For satisfactory use of your oven, become familiar with the various pad features and functions of the oven as described below.

Feature indicator
lights— These indicator

lights show if bake or broil
is active.

Up and down

Bake pad—Use to select

the bake feature.

Broil pad— Use to select
the variable broil feature.

arrow pads— Use
with the feature or
function pads to set
oven temperature or
adjusting the clock
and minute timer.

Timer on-off pad— Use to set or cancel the
minute timer. The minute timer does not start
or stop cooking.

Clock pad— Use to
set the time of day.

SETTING OVEN CONTROLS

Setting the clock

When the appliance is rst plugged in or when the

power supply to the appliance has been interrupted, the

display will ash “12:00”. It is recommended to always

set the clock for the correct time of day before using the
appliance.

To set the clock:

1. Press clock once (do not hold key pad down).

2. Within 5 seconds, press and hold the or until
the correct time of day appears in the display.

Changing the temperature display mode
(°F or °C)

The electronic oven control is set to display °F (Fahrenheit)
when shipped from the factory. The display may be
changed to show either Fahrenheit or Celsius oven
temperatures.

To change the temperature display mode from °F
to °C (Celsius) or from °C to °F (Fahrenheit).

1. Press and hold broil (for 6-8 seconds) until F or C
appears in the display. At this time the display will
show the current temperature display mode whether
set for F or C. Before proceeding read the notes below.

Clear off pad— Use to clear any feature
previously entered except the time of day and
minute timer. Press clear off to stop cooking.

3. To accept the change, wait until the oven control
provides the acceptance beep (See Notes below).

4. The display will return to the time of day with the
temperature display mode changed the next time the
oven is set for bake or broil.

NOTES

• If at any time during the process of changing the
temperature display mode you decide not to change
the mode, press the clear off key pad once before
the acceptance beep.

• The temperature display mode cannot be changed
when bake or broil is active.

2. Press either or key pad to toggle between F
(Fahrenheit) or C (Celsius) mode choices.

12

SETTING OVEN CONTROLS

Setting the minute timer

1. Press timer on-off.

2. Press the to increase the time in one minute
increments. Press and hold the to increase the time

in 10 minute increments. The timer can be set for any
amount of time from 1 minute to 11 hours and 59
minutes.

Note: If the pad is pressed rst, the timer will

advance to 11 hours and 59 minutes.

3. When the set time has run out, the timer will sound
a 3 second tone . 0:00 will show in the display until

timer on-off is pressed.

To change the timer while it is in use

While the timer is active and shows in the display, press
and hold the or to increase or decrease the time

remaining.

To cancel the minute timer before the set time has
run out
Press timer on-off once .

NOTES

Setting bake

The oven can be programmed to bake at any temperature
from 170°F to 550°F (77°C to 287°C). The factory preset
bake temperature is 350°F (177°C).

To set bake

1. Press bake. “— — —” appears in the display.

2. Within 5 seconds, press the or . The display will
show “350°F (177°C).” By pressing and holding the

or , the temperature can then be adjusted in 5°F
increments (1°C if the control is set to display Celsius).

3. As soon as the or pad is released, the oven will
begin preheating to the selected temperature. When
the oven reaches the desired baking temperature, the
control will beep once.

To change the oven temperature after bake has
started

1. Press bake. Visually check the bake temperature and
that it needs to be changed.

2. Press the or pad to increase or decrease the set
temperature to the desired new oven temperature.

NOTES

• The minute timer will not start or stop the cooking
process. It serves as an extra timer in the kitchen that
will beep when the set time has run out. The minute
timer can be used alone or while using any of the
other oven features.

• If another feature is active when the minute timer is
active, the minute timer will show in the display. To
view information about other active features, press
the pad for that feature.

To cancel baking at any time, press clear off.

IMPORTANT

Dark or dull pans absorb more heat than shiny bakeware
resulting in dark or overbrowning of foods. It may be
necessary to reduce the oven temperature or cook time
to prevent overbrowning of some foods. Dark pans are
recommended for pies. Shiny pans are recommended for

cakes, cookies and mufns.

13

SETTING OVEN CONTROLS

Setting broil

Use the broil feature to cook meats that require direct
exposure to radiant heat for optimum browning results.
When broiling always remember to arrange the oven racks
while oven is still cool.

For medium done steaks, position the oven rack closer to
the broil element (positions 4 or 5; Fig. 1). For well-done

foods such as chicken, sh, lobster or thick cuts of meat,

position the oven rack further from the broil element.

To set Broil

1. Arrange the oven rack while oven is still cool. Position

the oven rack as needed.

2. Press broil. “— —” will appear in display.

3. Press and hold the or until the desired broil
setting level appears in the display. Press the for

HI broil or the for LO broil. Most foods may be
broiled at the HI broil setting. Select the LO broil
setting to avoid excess browning or drying of foods
that should be cooked to the well-done stage.

4. For optimum results, preheat oven for 5

minutes before adding food.

5. Place the insert on the broil pan (some models; Fig.

2), then place the food on the broil pan insert.

6. Place the broiler pan and insert on the oven rack.

7. Open the oven door to the broil stop position when
broiling.

8. Broil on one side until food is browned. Turn and broil
food on 2nd side.

9. When broiling is nished press clear off.

NOTES

Always pull the oven rack out to the stop position before
turning or removing the food.

Insert

Broil pan

Fig. 1 Fig. 2

WARNING

Should an oven re occur, close the oven door and
turn the oven OFF. If the re continues, use a re

extinguisher. DO NOT put water or our on the re.
Flour may be explosive.

CAUTION

• The broiler pan and the insert (some models) allows
grease to drain and be kept away from the high
heat of the broiler. DO NOT use the pan without the
insert. DO NOT cover the insert with aluminum
foil; the exposed grease could ignite.

• To insure proper results when broiling use ONLY
Electrolux Home Products, Inc. approved broil pan &
insert.

14

SETTING OVEN CONTROLS

Adjusting oven temperature

Your appliance has been factory calibrated and tested

to ensure an accurate baking temperature. For the rst

few uses, follow your recipe times and temperature
recommendations carefully. If you think the oven is
cooking too hot or too cool for your recipe times, you can
adjust the control so the oven cooks hotter or cooler than
the temperature displayed.

To adjust oven temperature

1. Press & hold the bake key pad and release after the
display shows the factory temperature setting of 00.
If the oven temperature has been previously adjusted
from the factory setting, the latest adjusted value will
appear in the display instead.

2. You may increase the oven temperature in 5°F
increments with each press of the key pad. You

may also adjust the oven temperature downward in
5°F increments with each press of the key pad

(total adjustment range is +35°F to -35° F).

3. To accept the change, wait until the oven control
provides the acceptance beep (See Notes).

4. The oven temperature adjustment has been accepted
by the oven control and the display will return to the
time of day.

Operating oven light (some models)

The interior oven light will automatically turn ON when the
oven door is opened. Press the oven light switch located
on the upper left control panel to turn the interior oven
light ON and OFF whenever the oven door is closed.

The interior oven light is located at the upper left rear wall
of the oven interior. To change the interior oven light, see
“Changing the oven light” in the Care & cleaning section.

oven light switch

NOTES

• If at any time during the process of adjusting the
oven temperature feature you decide not to make the
change, press the clear off key pad once before the
acceptance beep.

• The oven temperature adjustment feature can not be
modied if bake or broil is active.

• The oven temperature adjustment may be made
if your oven control has been set for °C (Celsius)
temperature display mode. In this case each press

of the or key pad will adjust in 1°C increments
upward (maximum +18°C) or downward (maximum

-18°C), depending on which arrow key pad is
pressed.

• DO NOT USE oven thermometers such as those
found in grocery stores to check the temperature
settings inside your oven. These oven thermometers
may vary as much as 20 to 40 degrees from actual
temperatures.

15

CARE & CLEANING

Cleaning recommendation table

Surface type Recommendation

• Control knobs

• Painted body parts

• Painted decorative trim

• Aluminum, plastic or vinyl trim

pieces

• Control panel

• Decorative trim (some models)

• Stainless Steel (some models) Clean heavier soils with hot, soapy water and a dishcloth. Rinse with clean water

• Oven interior & door liner

• Porcelain enamel broiler pan

and broiler pan insert (some
models)

• Oven racks Remove oven racks from oven before cleaning. Clean by using a mild,

• Oven door Use soap & water to thoroughly clean the top, sides and front of the oven door.

• Ceramic cooktop Do not use spray oven cleaners on the cooktop. See cooktop cleaning and

For general cleaning, use hot, soapy water and a cloth. For more difcult
soils and built-up grease, apply a liquid detergent directly onto the soil.

Leave on soil for 30 to 60 minutes. Rinse with a damp cloth and dry. Do not use
abrasive cleaners on any of these materials; they can scratch. To remove control

knobs, turn to the OFF position; grasp rmly and pull straight off the shaft. To
replace knobs after cleaning, line up the at sides of both the knob and the shaft;

then push the knob into place.

Before cleaning the control panel, turn all controls OFF and if needed remove
any knobs from the panel. Clean using hot, soapy water and a dishcloth. Be
sure to squeeze excess water from the dishcloth before wiping the control
panel; especially when wiping around the controls area. Excess water in or
around the controls may cause damage to the appliance. When rinsing, use clean
water and a dishcloth and be sure to squeeze excess water from dishcloth before
wiping the control panel.

and a cloth. Do not use cleaners with high concentrations of chlorides or
chlorine. Do not use harsh scrubbing cleaners. Only use kitchen cleaners that are
especially made for cleaning stainless steel. Always be sure to wipe the cleaners off
from the surface as bluish stains may occur during heating that cannot be removed.

Gentle scouring with a soapy non-abrasive scouring pad will remove most spots.
Rinse with a 1:1 solution of clear water and ammonia. If necessary, cover

difcult spots with an ammonia-soaked paper towel for 30 to 40 minutes. Rinse
with clean water and a damp cloth, and then scrub with a soap-lled non-abrasive

scouring pad. Rinse and wipe dry with a clean cloth. Do not allow food spills with

a high sugar or acid content (milk, tomatoes, sauerkraut, fruit juices or pie lling)

to remain on the surface; they may cause a dull spot even after cleaning.

The oven interior is porcelain coated and is safe to clean using oven cleaners
following manufacturer’s instructions. After cleaning, remove any oven cleaner or
the porcelain may become damaged during future heating. Do not spray oven
cleaner on any electrical controls or switches. Do not spray or allow oven cleaner
to build up on the oven temperature sensing bulb. Do not spray cleaner on oven
door trim, door gasket, plastic drawer glides, handles or any exterior surfaces of
the range.

Clean any soils from the oven frame, the door liner outside the oven door gasket
and the small area at the front center of the oven bottom. Clean with hot, soapy
water. Rinse using clean water and a cloth.

abrasive cleaner following manufacturer’s instructions. Rinse with clean water and
dry.

Rinse well. You may use a glass cleaner on the outside glass of the oven door.

Do not immerse the door in water. Do not spray or allow water or the glass
cleaner to enter the door vents. Do not use oven cleaners, cleaning powders

or any harsh abrasive cleaning materials on the outside of the oven door.

maintenance in the Care & Cleaning section.

16

CARE & CLEANING

Cooktop maintenance

IMPORTANT

Consistent and proper cleaning is essential to
maintaining your ceramic glass cooktop.

Prior to using your cooktop for the rst time, apply

a ceramic cooktop cleaning cream (available in most
hardware, grocery and department stores) to the ceramic
surface. Clean and buff with a clean paper towel. This will
make cleaning easier when soiled from cooking. Cooktop

cleaning creams leave a protective nish on the glass to

help prevent scratches and abrasions.

Sliding aluminum or copper clad bottom pans on the
cooktop can cause metal markings on the cooktop surface.
These marks should be removed immediately after the
cooktop has cooled using the cooktop cleaning cream.
Metal marks can become permanent if not removed prior
to future use.

Cookware (cast iron, metal, ceramic or glass) with rough
or dirty bottoms can mark or scratch the cooktop
surface.

Do not:

• Slide anything metal or glass across the cooktop.

• Use cookware with dirt or dirt build up on bottom;

replace with clean cookware before using.

• Use your cooktop as a cutting board or work surface in

the kitchen.

• Cook foods directly on the cooktop surface without a

pan.

• Drop heavy or hard objects on the ceramic glass

cooktop, they may cause it to crack.

Cooktop cleaning

CAUTION

Before cleaning the cooktop, be sure the controls are
turned to OFF and the cooktop is COOL.

For light to moderate soil:

Apply a few drops of cooktop cleaning cream directly
to the cooktop. Use a clean paper towel to clean the
entire cooktop surface. Make sure the cooktop is cleaned
thoroughly, leaving no residue. Do not use the towel you
use to clean the cooktop for any other purpose.

For heavy, burned on soil:

Apply a few drops of glass-ceramic cooktop cleaner
directly to the soiled area. Rub the soiled area using a
non-abrasive plastic type no-scratch cleaning pad, applying
pressure as needed. Do not use the pad you use to clean
the cooktop for any other purpose.

If soils remain, carefully scrape soils with a metal razor
blade scraper, holding scraper at a 30 degree angle to
the surface. Remove loosened soils with cooktop cleaning
cream and buff surface clean.

17

CARE & CLEANING

Cooktop cleaning (cont’d)

Plastic or foods with a high sugar content:

These types of soils need be removed immediately if
spilled or melted onto the ceramic cooktop surface.
Permanent damage (such as pitting of the cooktop
surface) may occur if not removed immediately.

After turning the surface elements OFF, use a razor blade
scraper or a metal spatula with a mitt and scrape the soil
from the hot surface (as illustrated). Allow the cooktop to
cool, and use the same method for heavy or burned on
soils.

WARNING

DO NOT use a cooktop cleaner on a hot cooktop.
The fumes can be hazardous to your health and
can chemically damage the ceramic glass surface.

Do not use the following on the cooktop:

• Do not use abrasive cleaners and scouring pads, such

as metal and some nylon pads. They may scratch the

cooktop, making it more difcult to clean.

IMPORTANT

Damage to the ceramic glass cooktop may occur if you
use an abrasive type cleaning pad. Only use cleaning

products that have been specically designed for ceramic

glass cooktops.

Caution for aluminum use on the cooktop

• Aluminum Foil - Use of aluminum foil on a hot
cooktop will damage the ceramic cooktop. Do not use
thin aluminum cooking utensils or allow aluminum foil to
touch the ceramic cooktop under ANY circumstances.

• Aluminum utensils - The melting point of aluminum
is much lower than that of other metals. Care must be
taken when aluminum pots or pans are used on the
cooktop. If aluminum pans are allowed to boil dry when
using the cooktop, not only will the utensil be damaged
or destroyed, but it may fuse to, break or mark the
ceramic glass surface, permanently damaging the
cooktop surface.

• Do not use harsh cleaners, such as chlorine bleach,

ammonia or oven cleaners, as they may etch or discolor
the cooktop.

• Do not use dirty sponges, cloths or paper towels, as

they can leave soil or lint on the cooktop which can
burn and cause discoloration.

Replacing oven light

CAUTION

Be sure the range is unplugged and all parts are COOL
before replacing oven light. Wear a leather-faced glove for
protection against possible broken glass.

The interior oven light bulb is located at the upper left rear
of the oven cavity.

To replace the oven light bulb

1. Turn electrical power off at the main source or unplug

the range.

2. Replace bulb with a new 40 watt appliance bulb.

3. Turn power back on again at the main source (or plug

the appliance back in).

4. The clock will then need to be reset. To reset, see

“Setting the clock” in this Use & Care Guide.

18

Removing and replacing the lift-off oven door

Oven door

hing

CAUTION

CARE & CLEANING

• To avoid possible injury when removing or replacing the oven door,
follow the instructions below carefully and always hold the oven
door with both hands positioned away from the door hinge area.

• The door is heavy. For safe, temporary storage, lay the door at

with the inside of the door facing down.

To remove oven door:

1. Open oven door completely (horizontal with oor - See Fig. 1).

2. Pull the door hinge locks on both left and right door hinges down from
the oven frame completely towards the oven door (See Fig. 2). A tool

such as a small at-blade screwdriver may be required.

3. Firmly grasp both sides of oven door along the door sides (Do not use
the oven door handle - See Fig. 3).

4. Close the door to the broil stop position (the oven door will stop into
this position just before fully closing).

5. With the oven door in the broil stop position, lift the oven door hinge
arms over the roller pins located on each side of the oven frame (See
Fig. 4).

To replace oven door:

1. Firmly grasp both sides of oven door along the door sides (Do not use
the oven door handle - See Fig. 3).

2. Holding the oven door at the same angle as the removal position, seat
the hook of the hinge arm over the roller pins located on each side of
the oven door frame (See Fig. 4). The hook of the hinge arms must be
fully seated onto the roller pins.

3. Fully open the oven door (horizontal with oor - See Fig. 1).

4. Push the door hinge locks up towards and into the oven frame on both
left and right oven door hinges (See Fig. 2) to the locked position.

5. Close the oven door.

Special door care instructions - Most oven doors contain glass
that can break. Read the following recommendations:

• Do not close the oven door until all the oven racks are fully in place.

• Do not hit the glass with pots, pans, or any other object.

• Scratching, hitting, jarring or stressing the glass may weaken its

structure causing an increased risk of breakage at a later time.

hinge
locations

Fig. 1

K

C

O

L

Fig. 2

about

10°

oven
door

hinge

Fig. 3

Cleaning under lower element (some models)

CAUTION

The oven bake and broil elements may appear to have cooled after they
have been turned OFF. The elements may still be hot and burns may

occur if these elements are touched before they have cooled sufciently.

For models that have a visible lower bake element ONLY - This
bake element was designed to be tilted up using your hand from the front
of the bake element for cleaning purposes. Remove the bottom oven rack
before raising the element. Do not to raise the element more than 4 or 5
inches from the resting position.

roller

pin

e

arm

Fig. 4

19

BEFORE YOU CALL • Solutions to common problems

Problem Solution

Poor baking results. • Many factors affect baking results. Make sure the proper oven rack

position is used. Center food in the oven and space pans to allow air to
circulate. Allow the oven to preheat to the set temperature before placing
food in the oven. Try adjusting the recipe’s recommended temperature or
baking time. If you feel the oven is too hot or cool, see Adjusting oven
temperature section in this Use & Care Guide.

Appliance is not level. • Be sure oor is level, strong & stable enough to adequately support

range.

• If oor is sagging or sloping, contact a carpenter to correct the situation.

• Poor installation. Place oven rack in center of oven. Place a level on the

oven rack. Adjust leveling legs at base of appliance until the rack is level.

• Kitchen cabinet alignment may make range appear not level. Be sure
cabinets are square & have sufcient room for appliance clearance.

Cannot move appliance easily. Appliance
must be accessible for service.

Surface element too hot or not hot
enough.

Surface element does not heat. • Lightweight or warped pans used. Use only at, evenly balanced, medium

Entire appliance does not operate. • The time of day is not set. The time of day must rst be set in order to

Oven portion of appliance does not operate. • Be sure the oven controls are set properly for the desired cooking

• Cabinets not square or are built in too tightly. Contact builder or installer to

make appliance accessible.

• Carpet interferes with appliance. Provide sufcient space so appliance can

be lifted over carpet.

• Incorrect control setting. Be sure the correct control is ON for the element

that you are attempting to use.

or heavyweight cookware. Flat pans heat better than warped pans.
Cookware materials and weight of the material affect heating. Heavy
& medium-weight pans heat evenly. Because lightweight pans heat
unevenly, foods may burn easily.

operate the oven. See Setting the clock in the Setting Oven Controls
section.

• Make sure cord/plug is plugged correctly into outlet.

• Service wiring is not complete. Contact your dealer, installing agent or

authorized service agent.

• Electrical power outage. Check house lights to be sure. Call your local

electric company for service.

feature. See Setting Oven Controls in this manual or read the
instructions “Entire appliance does not operate” in this checklist.

Oven light does not work. • Be sure the light is secure in the socket. Also see Changing & replacing

the oven light section.

20

Solutions to common problems • BEFORE YOU CALL

Problem Solution

Oven smokes excessively during broiling. • Incorrect setting. Follow broil instructions in Setting Oven Controls.

• Make sure oven door is opened to broil stop position.

• Meat too close to the broil element. Reposition the oven rack to provide

proper clearance between the meat & the element. Preheat the broil
element for searing.

• Meat not properly prepared. Remove excess fat from meat. Cut remaining

fatty edges to prevent curling, but do not cut into lean.

• Broiler pan and insert wrong side up and grease not draining. Always

place insert on the broiler pan with ribs up & slots down to allow grease
to drip into pan (some models).

• Grease has built up on oven surfaces. Regular cleaning is necessary when

broiling frequently. Old grease or food spatters cause excessive smoking.

Flames inside oven or smoking from oven
vent.

Oven control panel beeps & displays any
F code error.

Scratches or abrasions on cooktop
surface.

Metal marks on the cooktop. • Sliding or scraping of metal utensils on cooktop surface. Do not slide

• Excessive spillovers in oven. For example this will happen for pie

spillovers or large amounts of grease left on the oven bottom. Wipe up

excessive spillovers before starting oven. If ames or excessive smoke

are present see Setting broil in the Setting Oven Controls section.

• Oven control has detected a fault or error condition. Press clear off to
clear the display & stop beeping. Try the bake or broil feature again. If
the F code error repeats, remove power from appliance, wait 5 minutes
and then repower appliance and set clock for the time of day. Try the
bake or broil feature again. If the fault recurs, record fault and call for
service.

• Coarse particles such as salt or sand between cooktop and utensils

can cause scratches. Be sure cooktop surface and bottoms of utensils
are clean before usage. Small scratches do not affect cooking and will
become less visible with time.

• Cleaning materials not recommended for ceramic-glass cooktop have been

used. See Cooktop cleaning and maintenance in the Care & Cleaning
section of this Use & Care Guide.

• Cookware with rough bottom has been used. Use smooth, at-bottomed

cookware.

metal utensils on cooktop surface. Use a ceramic-glass cooktop cleaner to
remove the marks. See “Cooktop cleaning and maintenance” in the Care
& Cleaning section.

Brown streaks or specks on cooktop
surface.

Areas of discoloration with metallic sheen
on cooktop surface.

• Boilovers are cooked onto surface. Use razor blade scraper to remove soil.

See Cooktop Cleaning and Maintenance in the Care & Cleaning
section.

• Mineral deposits from water and food. Remove using a ceramic-glass cooktop

cleaner. Use cookware with clean, dry bottoms.

21

NOTES

22

NOTES

23

MAJOR APPLIANCE WARRANTY

Your appliance is covered by a one year limited warranty. For one year from your original date of purchase,
Electrolux will pay all costs for repairing or replacing any parts of this appliance that prove to be defective in
materials or workmanship when such appliance is installed, used and maintained in accordance with the provided
instructions.

Exclusions This warranty does not cover the following:

1. Products with original serial numbers that have been removed, altered or cannot be readily determined.

2. Product that has been transferred from its original owner to another party or removed outside the USA or
Canada.

3. Rust on the interior or exterior of the unit.

4. Products purchased “as-is” are not covered by this warranty.

5. Food loss due to any refrigerator or freezer failures.

6. Products used in a commercial setting.

7. Service calls which do not involve malfunction or defects in materials or workmanship, or for appliances not in
ordinary household use or used other than in accordance with the provided instructions.

8. Service calls to correct the installation of your appliance or to instruct you how to use your appliance.

9. Expenses for making the appliance accessible for servicing, such as removal of trim, cupboards, shelves, etc.,
which are not a part of the appliance when it is shipped from the factory.

10. Service calls to repair or replace appliance light bulbs, air lters, water lters, other consumables, or knobs,

handles, or other cosmetic parts.

11. Surcharges including, but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry trip
charges, or mileage expense for service calls to remote areas, including the state of Alaska.

12. Damages to the nish of appliance or home incurred during installation, including but not limited to oors,

cabinets, walls, etc.

13. Damages caused by: services performed by unauthorized service companies; use of parts other than genuine
Electrolux parts or parts obtained from persons other than authorized service companies; or external causes

such as abuse, misuse, inadequate power supply, accidents, res, or acts of God.

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES

CUSTOMER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR
OR REPLACEMENT AS PROVIDED HEREIN. CLAIMS BASED ON IMPLIED WARRANTIES, INCLUDING WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE
SHORTEST PERIOD ALLOWED BY LAW, BUT NOT LESS THAN ONE YEAR. ELECTROLUX SHALL NOT BE LIABLE
FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL EXPENSES
RESULTING FROM ANY BREACH OF THIS WRITTEN LIMITED WARRANTY OR ANY IMPLIED WARRANTY. SOME
STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES, SO THESE LIMITATIONS OR
EXCLUSIONS MAY NOT APPLY TO YOU. THIS WRITTEN WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU
MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE.

If You Need
Service

Keep your receipt, delivery slip, or some other appropriate payment record to establish the warranty period should
service be required. If service is performed, it is in your best interest to obtain and keep all receipts. Service under
this warranty must be obtained by contacting Electrolux at the addresses or phone numbers below.

This warranty only applies in the USA and Canada. In the USA, your appliance is warranted by Electrolux Major Appliances North America,
a division of Electrolux Home Products, Inc. In Canada, your appliance is warranted by Electrolux Canada Corp. Electrolux authorizes no
person to change or add to any obligations under this warranty. Obligations for service and parts under this warranty must be performed

by Electrolux or an authorized service company. Product features or specications as described or illustrated are subject to change without

notice.

USA

1.800.944.9044

Electrolux Major Appliances
North America
10200 David Taylor Drive
Charlotte, NC 28262

Mississauga, Ontario, Canada

1.800.265.8352

Electrolux Canada Corp.

5855 Terry Fox Way

Canada

L5V 3E4