Frigidaire FES367ASB, FES367AQB, FES355ABC, FES367ASC, FES367ASA Owner’s Manual

...

ELECTRONIC OVEN CONTROL

Control Pad Functions

Read the instructions carefully before using the oven. For satisfactory useof your oven, become familiar with the various functions of the oven as described below. Note: The graphics on your timer may not look exactly like those shown. This doesn't change the way it operates.

Note: The oven function will not work if the time of day clock is not set.

Clear Pad-Usedto clearany function previously entered exceptthe time of dayand minute timer.

PushClear pad to stop cooking.

Bake Pad- Used to enter the normal_

baking mode temperature.

Broil Pad- Used to select the variable

broil function.

Clean Pad- Used to select the self-

cleaning cycle.

Upand Down arrow pads- Usedalong with the Clock Pad- Used to

function padsto selectoventemperature, cooking time, set the time of day. stop time (when programming anautomatic stop ti_ time of day,clean time and minute timer.

® Oven

• Preheat I Door Locked

• o •/{Self-Cleaning Oven ' ° '

Oven, Preheat & Lock lights- The "oven" light will glow each time the oven

unit turns on maintain the set oven temperature. The "Preheat" light will glow when the oven isfirst set to operate, or if the desired temperature isreset

higher than the actual oven temperature. The "Lock" light will flash until the

door locks when the self-clean cycle is in use. It glows constantly after the

door locks.

/ Feature indicator

t I

Timer Pad- Used to set or cancel the minute timer. The minute timer does not

start or stop cooking.

i lights-These light

to show which feature isin use.

Bake Time Pad- Used to enter the

length of the baking

time.

Stop Time Pad-

Used to set the

desired stop time for baking. Can be

used with BAKE TIME to program a

delayed bake cycle.

The oven can be programmed to:

Bake normally, Time Bake, Broil, Self-Clean

Note: Push buttons or pads may be shaped differently.

For a silent control panel:

When choosing a function, a beep will be heard each time a pad is pushed. If desired, the controls can be programmed for silent operation. Push and hold STOPTIME pad. After 7 seconds, the control will beep once. This will block the controls from sounding when a pad is pushed. To return the sound, push and hold STOP TIME pad again for 7 seconds until 1

beep is heard.

Note: The control will return to the audible mode after a power outage.

Temperature Conversion (Fahrenheit/Celsius)

The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be

programmed for any temperature from 170°F to 550°F (65°C to 287°C).

To change the temperature to °C(Celsius) or from °C to °F (control should not be in a Bake or Clean mode):

1. Push BROIL pad. "---" appears in the display.

2. Push and hold the UP ARROW pad until "HI" appears in the display.

3. Push and hold BROIL pad until °For °C appears in the display.

4. Push UP or DOWN ARROW pad to change °F to °C or °C to °F.

5. Push any function pad to return to normal operating mode. 1 318200191 (0104) Rev.A

Setting the Clock and Minute Timer

• •

Note: The oven function will not work if the time of day clock is not set.

Q Oven Q Preheat

• Door Locked

• • • Self-Cleaning Oven •

To Set the Clock

When the range is first plugged in, or when the power supply to the appliance has been interrupted, the display will flash "12:00".

1. Push CLOCK pad.

2. Within 5 seconds, push and hold the UP or DOWN ARROW pad until the correct time of day appears in the display. Note: The clock cannot be changed during any timed bake or self-clean cycle.

To Set the Minute Timer

1. Push TIMER ON/OFF pad.

2. Pushthe UPARROW pad to increase the time in one minute increments. Push and hold the UPARROW pad to increase

the time in 10 minute increments. The timer can be set for any amount of time from 1 minute to 11 hours and 59

minutes. Note: If you push the DOWN ARROW pad first, the timer will advanced to 11 hours and 59 minutes.

3. The display shows the timer count down in minutes until one minute remains. The displaywill count down in seconds.

4. When the set time has run out, the timer will beep 3 times. It will continue to beep 3 times every 60 seconds until

the TIMER ON/OFF pad is pushed.

Note: The minute timer does not start or stop cooking. It serves as an extra timer in the kitchen that will beep when the set time has run out. The minute timer can be used alone or during any of the other oven functions. When the minute timer is in use with any other mode, the minute timer will be shown in the display. To view other functions, push the function pad for that mode.

To Change the Minute Timer while it is in use: While the timer is active and shows in the display, push and hold the UP or DOWN ARROW pad to increase or decrease

the time.

To Cancel the Minute Timer before the set time has run out :

Push TIMER ON/OFF pad.

Setting Oven Controls

• •

Note: The oven function will not work if the time of day clock isnot set.

• Oven

• Preheat

• Door Locked

• • • Self-Cleaning Oven •

To Set or Change the Temperature for Normal Baking

The oven can be programmed to bake at any temperature from 170°F to 550°F (65°C to 287°C).

Note: The oven control has a built-in safety feature that will shut off the

oven if the control is left on for more than 11 hours 59 minutes.

To Set the Controls for Normal Baking:

1. Push BAKEpad." "appears in the display.

Within 5seconds, push the UP or DOWN ARROW pad. Thedisplaywill show"350°F (177°C).''Byholding the UPor DOWN ARROW pad, the temperature can then be adjusted in 5°F (1°C) increments.

3. As soon asthe UP or DOWN ARROW pad is released, the oven will begin heating to the selected temperature. When the displayed temperature reaches the desired baking temperature, the control will beep 3 times.

4. To cancel the baking function, push the CLEAR OFF pad.

To Change the Oven Temperature after Baking has Started:

1. If you are using the minute timer, push the BAKE pad and make sure the bake temperature is displayed.

2. Push the UP or DOWN ARROW pad to increase or decrease the set temperature.

To Set Control for Continuous Bake or 1 2 Hour Energy Saving: The oven control has a built-in 12 Hour Energy Saving feature that will shut off the oven if the control is left on for more

than 11 hours and 59 minutes. The oven can be programmed to override this feature for continuous baking. To set control for continuous baking:

1. Push TIMER ON/OFF pad, "0:00" will appear in the display.

2. Pushand hold TIMER ON/OFF pad down for 5 seconds until tone isheard, "---- hr"will appear indisplay for continuous

cooking. The current time of day will return to the display.

3. To cancel the Continuous Bake Function, push TIMER ON/OFF pad and hold for 5 seconds until tone is heard. "12hr" will appear in display indicating that the control has returned to the 12 Hour Energy Saving feature.

To Set Control for Oven Lockout:

The control can be programmed to lock the oven door and inactivate the oven controls. To Set Control for Oven Lockout feature:

1. Pushthe CLEAR OFF pad and hold for 3 seconds. "Loc" will appear indisplay, the"Door Locked" indicator light will flash

and the motor driven door lock will begin to close automatically. DO NOT open oven door while the indicator light is flashing. Allow about 15 seconds for the oven door to lock. Once the oven door is locked, the current time of day

will appear in the display.

2. To cancel the lockout feature, push CLEAR OFF pad and hold for 3 seconds. The control will unlock the oven door

and resume normal operation.

Note: If any control pad is pressed while the Oven Door/Control Lockout mode, "Loc" will appear in the display until

the control pad is released.

+ 5 hidden pages