Frigidaire FDBC45BAS0, FDBC45BAB0 Owner’s Manual

600 Series
Dishwasher
Safety
Instructions ........................ 2
Features .............................. 3
Normal Operating
Sounds ............................... 4
Operating
Instructions ...................... 4-5
Preparing and
Loading Dishes ............... 6-7
Dishwasher Dispenser
and Detergents ................ 6-9
Record All Information For Future Reference
Brand: ............. Purchase Date:
Model #:
Serial #:
(see Features page for location)
(United States)
Factors Affecting
Performance ....................... 9
Care and
Cleaning ............................ 10
Changing
Color Panels ...................... 11
Solutions to Common Dishwashing Problems...12-14
Consumer Services
Warranty & Service ............................... 15
(Canada)
READ AND SAVE THESE INS TRUCTIONS P/N154409901(0108)
Important Safety Instructions
This symbol will help alert you to such dangers as personal injury, burns, fire and
electrical shock.
To reduce the risk of fire, electrical shock, or injury when using your dishwasher, follow
basic precautions including the following:
Read all instructions before using your
dishwasher.
Use your dishwasher only as instructed in
this Use and Care Manual. This Manual does not cover every possible
condition and situation that may occur. Use common sense and caution when installing, operating and maintaining any appliance.
DISHWASHER MUST BE ELECTRICALLY GROUNDED. Read the Installation
Instructions for details.
This dishwasher is designed to operate on
regular house current (120 V, 60 Hz). Use a
circuit equipped with a 15 ampere fuse or circuit breaker. Use a 20 ampere fuse if
dishwasher is connected with a food waste disposer.
Do not operate dishwasher unless all
enclosure panels are in their proper place. To avoid entrapment and/or suffocation,
remove door or door latch mechanism from
any dishwasher that is discarded or not in
use.
Keep young children and infants away from
dishwasher when it is operating.
Do not let children abuse, sit, stand or play
on door or racks of a dishwasher.
Do not wash plastic items unless marked "dishwasher safe" or the equivalent. Check
with manufacturer for recommendations, if
not marked. Items that are not dishwasher safe may melt and create a potential fire
hazard. If the dishwasher drains into a food
disposer, make sure disposer is completely empty before running dishwasher.
Disconnect electrical power to dishwasher before servicing.
Repairs should be done by a qualified technician.
Do not tamper with controls. Do not touch the heating element during or
immediately after use.
When loading items to be washed:
- Locate sharp items and knives so that they are not likely to damage the door
seal or tub.
- Load sharp items and knives with the handles up to reduce the risk of cut-type injuries.
Under certain conditions, hydrogen gas may be produced in a hot water system that
has not been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If hot
water system has not been used for such a
period, before using dishwasher, turn on all hot water faucets and let water flow from
each for several minutes. This will release any accumulated hydrogen gas.
HYDROGEN GAS IS FLAMMABLE. Do not smoke or use an open flame during this
time. Do not store or use combustible materials,
gasoline or other flammable vapors and liquids in the vicinity of this or any other
appliance.
Use only detergents and rinse agents recommended for use in a dishwasher.
Store dishwasher detergent and rinse
agents out of the reach of children.
SAVE THESE
INSTRUCTIONS
@2001 White Consolidated Industries, Inc.
All rights reserved. Printed in U.S.A.
2
Dishwasher Features
Your dishwasher cleans by spraying a mixture of hot water and detergent through the spray arms
against soiled surfaces. Each cycle begins with a pre-drain. Next, the dishwasher fills with water covering the filter area. Water is then pumped through the filter and spray arms. Soil particles go down the drain as the water is pumped out and replaced with clean water. The number of water fills
will vary with the cycle being used.
Tub Gasket,
page 10
Middle Spray Arm \ pages 6,7,12 \
Lower Spray Arm \ pages 7,12 \
Overfill Protector
page10
Prewash Detergent Cup \
page 8
Detergent Dispenser
page 8
Rinse Aid Dispenser
page 9
\
Funnel
pages 6,12
\
\
Nozzle and Upper Spray
_\ (some models)
\
\
_Top Rack
page 6
Serial Label
(located on right
/ side of tub)
Bottom Rack
_page 7
_Glass Trap
J
page10
_JSelf-Cleaning Filter
page10
_ Heating Element
page 10
_\\\\\
Vent
pages
4,5,13
3
Operating Instructions
_tt Om _ff _ e_
Ki-T_mp HF-T_mp Hea_
Very Important
Information Read Before
Operating Your Dishwasher!
Normal Operating Sounds
This dishwasher does not sound like most dishwashers--IT'S QUIETER.
Your Precision Wash System® dishwasher uses energy efficient motors for the wash and drain portions of the cycle you select. Each cycle has a series of water fills and drains for washing and rinsing dishes. As each cycle begins, you may-or may not-
hear the drain motor. The next sound you will hear is the
splashing water as it enters the tub. Then the lower arm rotates and circulates water. This
is followed by a pause and a slightly different sound as the middle arm sprays water. If you listen closely, you will hear the change in
sound as the wash action switches from one arm to the other.
PLEASE BE ADVISED: If you compare this dishwasher to previous models, you may be surprised at what you DON'T
hear!
Appearance may vary from your model.
Getting Started
1. Load dishwasher (See Preparing and Loading Dishes).
2. Add detergent (See Dishwasher Dispenser & Detergents).
3. Add rinse aid, if needed (See Rinse Aid).
4. Turn dial clockwise to select cycle (See
Cycle Chart) or number of hours for delay
start.
5. Select desired energy OPTIONS (See
Energy Options). The indicator will show red
when selected.
6. If using DELAY START, go to step number
8.
7. Run hot water faucet nearest dishwasher
until water is hot. Turn water off.
8. To start, close door to latch.
Delay Start
Allows you to delay starting the POTS & PANS cycle.
Turn dial to select number of hours.
Select HI-TEMP WASH ON option and other desired options.
Close door to latch. The DELAY START light (available select models) will come on.
Plate Warmer (availableselect
models)
For warming dishes and serving plates before
serving hot foods:
Load clean plates and dishes to be warmed.
Turn dial to PLATE WARMER.
Select HEAT DRY ON option.
Operating Instructions (continued)
Wash Cycle Selections
Note: Cycle times are approximate and will vary with options selected. Not all cycles available on all models.
Cycle Chart
Cycle Description To Select Cycle Water Time* Washes/
(approx.) (approx.) Rinses
Pots & For pots, pans, Turn dial to POTS & PANS/HEAVY 7.2 gal. 81 min. 2 washes Pans casseroles, and WASH. 6.0 imp. gal. 4 rinses
dinnerware with dried- Select HI-TEMP WASH ON option. 27.3 liters on or baked-on soils. Select other desired OPTIONS.
Heavy For heavily soiled Turn dial to POTS & PANS/HEAVY 7.2 gal. 81 min. 2 washes
Wash dishes and silverware. WASH. 6.0 imp. gal. 4 rinses
Select desired OPTIONS. 27.3 liters
Normal For regularly soiled Turn dial to NORMAL WASH. 6.0 gal. 75 min. 2 washes
Wash dishes and silverware. Select desired OPTIONS. 5.0 imp. gal. 3 rinses
22.7 liters
Short/ For lightly soiled or Turn dial to SHORT/LIGHT WASH. 4.8 gal. 67min. 1 wash Light 3re-rinsed dishes and Select desired OPTIONS. 4.0 imp. gal. 3 rinses
silverware. 18.2 liters
Rinse/ For rinsing dishesthat DO NOT USE detergent. 1.2 gal. 4 min. 1 rinse Hold will be washed later. Turn dial to RINSE/HOLD. 1.0 imp. gal.
4.5 liters * Includes dry time.
Energy Options
Hi-Temp Wash Option
When HI-TEMP WASH ON option is selected,
the dishwasher heats the water in the main
wash to approximately 140°F (60°C). Wash
action will continue but timer will not advance until proper temperature is reached. The hotter
water provided by this option helps activate
dishwasher detergent to clean food grease and soil from dishes. HI-TEMP WASH ON
option can be used with any cycle except RINSE/HOLD.
To turn off option, select HI-TEMP WASH OFE
Hi-Temp Rinse Option
When HI-TEMP RINSE ON option is selected,
the dishwasher heats the water in the final
rinse to approximately 140°F (60°C). This will speed drying and reduce spotting. HI-TEMP
RINSE ON option can be used with any cycle
except RINSE/HOLD. TO turn off option, select HI-TEMP RINSE
OFF.
Heat Dry Option HEAT DRY ON option provides faster drying
since the heating element is on during the drying portion of cycle.
HEAT DRY OFF option saves electricity since the heating element is off during the drying
portion of cycle. To speed drying process, open the door slightly after the cycle is complete.
Some water droplets may remain on door and tub and in areas where dishes touch silverware
basket and rack.
With either option, you may see water vapor
coming from vent during the washing and/or drying portion of cycle. On some models, the
vent is closed during washing to hold moisture and sound inside and then opens for drying.
The drying option may be changed at any time during the cycle and affects only the drying
period.
Status Indicator Lights (available on select models)
When DELAY START option is selected, the
Delay Start light will glow as timer counts down to begin cycle.
The HEATING DELAY light means the cycle is being extended to heat water to proper
temperature in the main wash or final rinse, based on options selected.
CLEAN light comes on when a cycle is complete. To turn it off, turn dial slightly until
light goes off.
5
Loading...
+ 11 hidden pages