Frigidaire FBD2400KW9B, FBD2400KW8B, FBD2400KW7B, FBD2400KW6B, FBD2400KW5B Owner’s Manual

www.frigidaire.com

Please read all instructions before using this

dishwasher.

For your Safety

Use your dishwasher only as instructed in

this Use and Care Manual.
This Manual does not cover every possible

condition and situation that may occur.
Use common sense and caution when

installing, operating and maintaining any
appliance.

DISHWASHER MUST BE ELECTRICALLY
GROUNDED. Read the Installation
Instructions for details.

The dishwasher is designed to operate on

regular house current (120V, 60Hz). Use
a circuit equipped with a 15 ampere fuse
or circuit breaker. Use a 20 ampere fuse

if dishwasher is connected with a food
disposer.

Do no operate dishwasher unless all
enclosure panels are in their proper place.

To avoid entrapment and/or suffocation,

remove door or door latch mechanism from
any dishwasher that is discarded or not in

use,

Keep young children and infants away from
dishwasher when it is operating.

Do not let children abuse, sit, stand or play
on door or racks of a dishwasher.

Use only detergents and rinse agents
recommended for use in a dishwasher.

Store dishwasher detergent and rinse
agents out of the reach of children.

• Do not wash plastic items unless marked:
"Dishwasher Safe" or equivalent. Check

with manufacturer for recommendations,
if not marked. Items that are not marked

dishwasher safe may melt and create a
potential fire hazard.

• Disconnect electrical power to dishwasher

before servicing.

• If the dishwasher drains into a food

disposer, make sure disposer is completely
empty before running dishwasher.

• Repairs should be done by a qualified
technician

• Donottamperwithcontrols.

o

Do not touch the heating element during or
immediately after use.

Use care unloading the dishwasher.

Contents may be hot to the touch

immediately after the end of cycle.

Water vapor from the vent may be hot to
the touch. Use care and do not let small

children play around or touch the vent area
of the dishwasher.

o

When loading items to be washed:

o

Locate sharp items and knives so that

they are not likely to damage the door
seal or tub.

Load sharp items and knives with the
handles up to reduce the risk of cut-type
injuries.

Under certain conditions, hydrogen gas
may be produced in a hot water system

that has not been used for 2 weeks or

more. HYDROGEN GAS IS EXPLOSIVE. If
hot water system has not been used for

such a period, before using dishwasher,
turn on all hot water faucets and let

water flow for several minutes. This will

release any accumulated hydrogen gas.
HYDROGEN GAS IS FLAMMABLE. Do not

smoke or use an open flame during this
time.

Do not store or use combustible materials,

gasoline or other flammable vapors and

liquids in the vicinity of this or any other

appliance.

To reduce the risk of fire, electrical shock or

injury when using your dishwasher, follow

the ab°ve basic precauti°ns :..............................................................

This symbols will help alert you to such
dangers as personal injury, burns, fire and

electrical shock.

ThankyouforchoosingFrigidaire

This Use & Care Guide is part of our
commitment to customer satisfaction and

product quality throughout the service life of
your new appliance.

We view your purchase as the beginning of a
relationship. To ensure our ability to continue
serving you, please use this page to record
important product information.

Purchase Date

Model Number

Serial Number
Registering your product with Frigidaire

enhances our ability to serve you. You can
register online at www,frigidaire,¢em or by
dropping your Product Registration Card in the

mail.

Your Tower Wash System®dishwasher uses a
proven single, rotating arm with a telescoping

set of wash jets for targeting the upper rack.
Cycles begin with a drain to remove liquid
that may have been added during loading.
Following that, you may hear a series of
wash segments for washing and later rinsing.
These wash segments start with the addition
of water, then follow by the spraying of dishes
and then end by draining the wash or rinse
fluid. Other actions will take place during the
cycle that you will not be able to hear. These
include addition of detergent, heating of the
fluid, dispensing of rinse agent, and pulsed
heating of the dishware after the final drain to
improve drying.

Wash Cycle Selection

Heavy Wash

For heavily soiled dishware, pots, pans,
casserols and dinnerware with dried-on or

baked-on soils:

• Turn dial to HEAVY WASH.

• Select desired heating option (heat dry/
air dry).

Normal Wash

For daily, regular use to completely wash and
dry up to a full load of dishes and silverware:

• Turn dial to NORMAL WASH

• Selectdesiredheating option (heat
dry/air dry).

Drying/Plate Warmer

For adding an additional dry period to a cycle to

obtain warm, dry dishes:

• Ensure the heat dry option is still selected.

Within 15 mins after cycle completion,
open the door slightly, rotate the knob
clockwise to "DRYING/PLATE WARMER',

and close the door.

For the best drying: While the door is open
briefly to re-set the timer gently move the
racks in and out an inch or two to spill out

some of the water that may be trapped in

recessed areas of dishware.

Recommended Cycle

The Normal cycle along with the heated
dry option together provide the best all
around performance. This cycle selection is
recommended for everyday use and is suitable
for a large range of both dish load sizes and
food quantities remaining on those dishes.

Getting Started

1. Load Dishwasher (See Preparing and
Loading Dishes).

2. Add detergent (See Dishwasher
Dispenser & Detergents).

3. Add Rinse Aid (See Rinse Aid).

4. Turn dial clockwise to select cycle (See
Wash Cycle Selection).

5. Select desired OPTION (See Energy

Options).

6. Run hot water faucet nearest
dishwasher until water is hot. Turn water off.

7. To start, close door to latch.

Water Heating Delay

This dishwasher is equipped with a thermostat
to ensure that the water is heated to the proper
temperature for optimal cleaning and drying
results. The knob/timer on the dishwasher
may pause at the position labeled "water
heating': The dishwasher is not stuck here,
but issimply heating the water to the proper
temperature before advancing. A minimum
water temperature of 120°F is recommended to
minimize this water heating delay.

Using the Timer

The timer advances to complete the portion
of the cycle between the dial position and

OFF. Started at Heavy Wash it will run through
Heavy, Normal and Dry. Set at Normal Wash it

will run Normal and Dry, and so on.

• It is best to have the door unlatched while
setting the timer.

• The timer dial should always be advanced
in the clockwise direction.

4 positions are available for use, the OFF
position and the start positions for Heavy
Wash, Normal Wash and Drying.

Other stops on the dial path are to allow
the unit functions to be quickly checked
during production but are of no practical
use for washing or drying dishes in the

home.
The "Water Heating" text is to mark the

position where the dial may pause while
temperature is increased to make the wash

effective - it is not a location for starting
any cycle.

• The Heavy and Normal cyclesstart with a
drain, then a fill, then spraying - you may

not be able to hear that it has started at
first.

Energy Options

The toggle switch provided to choose between

heat dry and air dry affects heater operation

but only during the drying portion of the cycle.
The selection may be made at any time prior
to or during the cycle. It affects only the

portion of the cycle's drying that follows the
selection. With either option, you may see
water vapor coming from the vent near the top

of the door - this is normal.

Heat Dry Option

Selecting the Heat Dry option will cause the

heating element to be on during the drying
portion of the cycle.

The Heat Dry option in combination with rinse
aid will improve drying results. The energy
to use Heat Dry is greater than if Air Dry is
selected but costs just pennies per cycle.
Turning off the Heat Dry option, will result in

more of the dish load being wet at the end of

the cycle.

Air Dry Option

Selecting the Air Dry option reduces energy

use and lowers costs by preventing the heating

element from coming on during the drying

portion of the cycle.

With this option drying may be improved by

using rinse aid and opening the door slightly
immediately after the cycle is complete.

OFF heavy wash

drying/

plate warmer

options

dW dry

normal wash

water heating

Cycle Chart

Cycle

Heavy Wash

Normal Wash 64 mins* 3 Washes 2 Rinses

Drying/Plate

Warmer

Water (Approx.)

5.2 gal.

4.4 imp.

19.8 Liters.

4.4 gal.

3.6 imp.gal.

16.5 liters

Time (Approx.)

68 mins*

14 mins*

Washes/Rinses

4 Washes 2 Rinses

* Includes dry time.