Frigidaire FAR105S1A11, FAR105S1A12, FAR105S1A13, FAR125S1A11, FAR125S1A12 Installation Guide
...
INSTALLATIONINSTRUCTIONS
_J_,_;i_ %_ _ _ _ _i_ _D _
Gathertherequiredtoolsandpartsbeforeste_ng installation.
Readand Iollowtheinstructionsprovidedwithanytools listed
here.
Tools Needed
• Flat-bladeandPhillips • Tapemeasure
screwdrivers • Drmlland_a="orsmaller bit
• Level
Through-the,Wall Installation:
In addition to the tools listed above, the Iollowing tools are
needed Ior through-the-wall installation.
• ,Saw • 1"(2,5 cm)orthicker
• Wood preservative
• Caulk • #10 x 1"wood screws(7)
Parts Supplied (on some models)
Checkthatall partsareincludedinpartspackage.
lumber
IMPORTANT:Observeall governingcodesand ordinances.
Checkthe locationwhereair condiUonerwillbeinstalled.Proper
installationis yourresponsibility. Makesure you ha_eeverything
necessaryfor correct installation.
Thelocationshouldprovide:
• Groundedelec_'icaloutle(within 4 It(122 cm)ol wherethe
powercord exitsthe airconditioner.
NOTE:Do not useanextensioncord,
• Freemovementofair inroomtobe cooled.
• A largeenoughopeningforthe airconditionen
• Adequatewallsupportforweightof airconditioner.Air
conditionerweighsbetween99 and 95 Ibs(36to 44kg).
NOTE: Cabinetlouversmustnot be obstructed.Air mustbe able
passIreelythrough the cabinetlouvers,
C O E F
A. Foam window sash seal
B. t&qndowlock brecke(s (2)
C. #10x (_'pan-head Ph#/tps
screws (6)
O. 110 x _" pan-head
Philflps screws (3)
E.#lO x _/4"round-head screws (6)
F, llOx tla" pan-head Phil#ps
SCreWS(3)
G. Topchannel
H. SMe curtains (2)
I.Foam seal
NOTE: Installation partsaresuppliedfordouble-hungwindows
upto40" (101.6cm)wide.A special Wide WindowKitis available
Immyour dealeror servicecenter.See"Accessories."
A. Cabinet louvers
P/N 66129901291 1
I- --1
l 1
A.27" (68.6cm) minimum
B.16114"(41.3 cm)minimum
• Height: 16" (40,6 cm) plus twice thickness of wood used to
build frame.
• Depth: 21tz"(6,4 cm) minimum to 6"(15,2cm) maximum,
C
A._6"(4o.ecm)
B. 22sis" (57. 5 cm)
C. Wood thickness
!
D. 2 h" (6.4) minimum to
6 "(15.2cm) maximum.
2
INSTALLATION INSTRUCTIONS
E]messlveWeight Hazard
Uee two or more poopleto move end Install
air conditioner,
Failure to do so can rneult In beck or othor Injury.
Remove packaging materials
• Removeand disposeoflmcycle packagingmatarials,
Removetape andglueresidue from surfacesbeforeturning
on theairconditioner,Rub a smallamountof liquiddish soap
overtheadhesivewithyourfingers,Wipewithwarmwater
and dry,
• Do notuse sharpinstruments,rubbing alcohol,flammable
fluids, or abrasivecleanersto removetape orglue,These
productscandamage thesudace ofyourairconditioner
• Handlethe aircondidonergently,
1, Removethe aircondil_onerlromthe carton andplace iron
cardboard,
2. Removeshippingscrews frombothsidesof the cabinet.
x @
4. Removethewindowlock bracketand screwfromthe air
condil_onerandset aside,(onsomemodels)
A, WYndowlock breckez screw
B, Mflndow lock breckez
5. Remove the ground screw and ground wire from the front
ol the air condiUoner base,Save the ground screw,
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII1_1
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIlib_
_A
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIl_)J
A
A, Shipping screw
3,
Remove front panel by removln 9 2 phillips screws,one from
ettherstde of front
3A: Remove four screws of control panel from front.panel,
A, Green ground wiro
B, Ground screw
6,
Pullon the handlesIx)slidethe airconditionerout.ofthe
cabinet.Placethe airconditioneroncardboard,
A. Handles
NOTE: Do not.lift, push,pullor removeany expanded
polystyrene(foam)from insidethe aircondil_onerIt isno_
packingmaterial,
3
Loading...