Frigidaire FAQ055S7A11, FAQ055S7A12, FAQ055S7A13, FAQ085S7A11, FAQ085S7A12 Installation Guide

...

iNSTALLATIONINSTRUCTIONS

Gatherthe requiredtoolsand partsbeforestartingInstallation. iMPORTANT:Observe all governingcodesand ordinances.

Readand followtheinstructionsprovidedwith any tools listed Checkthe locationwhereair conditJonerwlllbe nstelled.Proper

here. installat_onisyourresponsiblli_j.Make sure youhaveeverythin_ Took; Needed necessaryfor correct,installation.

The locationshould provide:

[] Flat-bladeand Phillips [] Tapemeasure [] Groundedelecl_icaloutietwithin 4 ft(122 cm)of where b_e

screwdrivers [] Drilland _" or smallerbit powercordexitsthe airconditioner.

[] Level NOTE: Donot usean extensioncord.

Through.the,Waft Instahtion: In additionto thetools listed above,the followingtoolsare [] Alarge enoughopeninglor Lheair conditioner,

neededforthrough-the-wallInstalation. [] Adequatewallsupporr.forweight a!air conditioner.Air

[] Saw [] 1" (2,5cm) orthicker conditionerweighsbeLween50 and 60 Ibs[22to 28 kg), [] Woadpreservative

[] Caulk

Parts SuppFmd(on some models)

Checkthat.all parts are includedinparis package,

lumber MOTE:Cabinetlouversmust_otbe obstructed.Airmust be able

[] #10 x 1"wood screws (7) to passfreelythrough thecabinet,louvers.

[] Freemovement of air inroomto becooled.

C D E F

screws _)

G.Topchannel

O.JlOx _" pan-head H,Sidecurtains(2J

Phillips screws _3) L Fo#m seal

NOTE: Installationpartsare suppliedlor double-hungwindows upto 40 (101.6cm)wide, AspecialWideWindowKit.isavailable

from yourdealeror servicecenter.See "Accessories."

A. Cebtnet touvers

PIN 66129901290 1

Window Installation

Window opening measurements:

m 22.2" to 40" (56.3 cm to 101.6 cm) opening width,

14"(35.5cm) mm#ni4mopeninghe_gl_L

A. 22.2" (56.3 cm) minimum

e.14"(355cm)minimum

Through,the.Waft lnstafia_n

The wall opening measurements should be: [] Width: 19V_(48.4 cm) plus twice thickness of wood used to

build frame,

[] Height: 13" (35 2cm) plus twice thickness of wood used to

build frame.

[] Depth: 2_h" (6.4 cm) minimum to 4" (lO.lcm) maximum.

A. 13"(35.2cm) B. 19_[_" H&4 cm)

C, Wood thickness

D, 2/z"(&4) minimum to

4" (10. lcm) maximum,

iNSTALLATiON iNSTRUCTiONS

Ex_sslw Weight Hazard

Use two or mor_ people)to move)and Inee_ll

sir _orldltloner.

Fmilumto do so €_n result in back or o_herinjury.

Remove packagk_g mab_dels [] Removeand disposeof/recyclepackagingmaterials.

Removetape andgl-e residuefromsurfacesbeforeturning ontheairconditioner.Ruba smallamount-elliquiddishsoap

overthe adhesivewithyour lingers.Wipe withwarmwater

and dry,

[] Do not.useshaq_ins_umen_sorubbingalcohol, flammable

fluids, or abrasivecleanersto remove tape orglue.These preducLscandamagethe surfaceo| yourairconditioner.

[] Handlethe air conditionergently.

1. Removethe air conditJonerfrurnthecar_n and place iton

cardboard.

2. Removeshippingscrews|rein bothsideso| the cabineL

4L Removethe windowlockbracket and screw |rein the air

conditJonerand setaside.(on some models)

A, Window Iocl_bracket screw

B. Window lock bracket

5. Removethe groundscrew and groundwirefromthe |ronL of theair condi_Jonerbase.Savetheground screw,

.........,:_a. _,_,!_4b._

A. Shipping screw

Remove|rent panelbyremoving 2 phillipsscrews,onefrom

either side of front

3A: Remove 3 screws of control panel Item front panel.

A. Green ground wire

B. Ground screw

6. Pull on the handles to slide the air conditioner out of the cabineL Place the air cendiLioner on cardboard,

A,H_d_s

NOTE: Do not II_t.push, pull or remove any expanded polystyrene (foam} lrom inside the air conditioner. It is not packing rnatarial,

+ 5 hidden pages