Frigidaire CGLES385FS2, CGLES389FS2, CGLES389FS1, CGLES389FB2, CGLES389FB1 Owner’s Manual

...
Electric
Range
@
Drop-in
Models
/ Shale-
Welcome .................................. 2
important Safety Instructions ..3=5
Setting Surface Controls .... 7-13
Surface Cooking .................. 14
Before Setting
Oven Controls ................. 14=15
Setting Oven Controls ......... 15
Setting Warmer Drawer Control ... 16=1 7
Visit the Frigidaire Web Site at:
http://www, frigidaire,com
READ AND SAVE THESE INSTRUCTIONS
Cooking Informations ..... 18=19
Care & Cleaning .............. 20=27
Adjusting Your
Oven Temperature ................ 27
Before You Call
Solutions to
Commo.Problems....................... 28=29
Warranty ................................ 30
318203811 (0609) Rev. C
Questions'?.
1-800-944-9044
(United States)
1-866-294-9911
(Canada)
Please attach sales receipt
here for future reference.
Welcome & Congratulations
Congratulations on your purchase of a new appliance! At Electrolux Home Products, we are very proud of our product and are completely committed to providing you with the best service possible. Your satisfaction is our number one priority.
We know you'll enjoy your new appliance and ThankYou for choosing our product. We hope you consider us for future purchases.
PLEASE CAREFULLY READ AND SAVE THESE INSTRUCTIONS This Use &Care Manual contains general operating instructions for your appliance
and feature information for several models. Your product may not have all the described features. The graphics shown are representative. The graphics on your appliance may not look exactly like those shown. These instructions are not meant to cover every possible condition and situation that may occur. Common sense and caution must be practiced when installing, operating and maintaining any appliance.
Please record your model and serial numbers below for future reference.
Model Number: Serial Number:
Purchase Date:
Product Registration
Register Your Product
The PRODUCT REGISTRATION CARD should be filled in completely, signed and returned to
Electrolux Home Products.
Serial Plate Location
Serial Plate
Location
Storage drawer (some models only)
© 2006 EiectroluxCanadaCorp.
All rights reserved
Printed in United States
Read all instructions before using this appliance.
Save these instructions for future reference.
This guide contains important safety symbols and instructions. Please pay special attention to these symbols and follow all instructions given. Here is a brief explanation of these symbols.
This symbol Wil! he!p alert you to situations that maY Cause serious bQdily haim, death or pioPerty damag e
_ This symbol will help alert you to situations that may cause bodily injury or property damage.
SLIDE-IN MODELS ONLY
To reduce
All ranges can tip.
Injury to per- sons could
result.
Install anti-tip device
packed with range.
See Installa- tion instruc- tions.
Remove all tape and packaging wrap before using the
appliance. Destroy the carton and plastic bags after
unpacking the appliance. Never allow children to play
with packaging material.
Proper Installation--Be sure your appliance is prop-
erly installed and grounded by a qualified technician
in accordance in the United States with National Electrical Code ANSI/NFPA No. 70--latest edition and
local code requirements, and in Canada with CSA C22.1 PART l--latest edition and local code require- ments. Install only per installationinstructionsprovided in
the literature package for this appliance. Ask your dealer to recommend a qualified technician and
an authorized repair service. Know how to disconnect the
electrical power to the range at the circuit breaker or fuse box in case of an emergency.
User Servicing--Do not repair or replace any part of
the appliance unless specifically recommended in the
manuals. All other servicing should be done only by a
qualified technician to reduce the risk of personal injury and damage to the appliance.
Never modify or alter the construction of a range by removing leveling legs, panels, wire covers, anti-tip brackets/screws, or any other part of the product.
the risk of tipping of the range, the range must be secured by properly in- stalled anti-tip bracket(s) provided with the range. To check if the bracket (s) is installed properly, remove the lower panel or storage drawer and verify that the anti-tip bracket (s) is engaged. Refer to the
installation instructions for proper anti-tip bracket(s).
DROP=IN MODELS ONLY
To reduce
All ranges can tip. Injury to per-
sons could result.
Install anti-tip device
packed with range.
See Installa- tion Instruc- tions.
Stepping, leaning or sitting on the door
or drawer of this appliance can result in serious injuries and may also cause damage to the appliance. Do not allow children to climb or play around the appliance. The weight of a child on an open door may cause the appliance to tip, resulting in serious burns or other injury. An open drawer, when hot, may cause burns.
Do not use the oven or warmer drawer (if
equipped) for storage.
Storage in or on Appliance--Flammable materials
should not be stored in an oven, near surface units or
in the drawer (if equipped). This includes paper, plastic
and cloth items, such as cookbooks, plasticware and towels, as well as flammable liquids. Do not store
explosives, such as aerosol cans, on or near the appli- ance. Flammable materials may explode and result in fire or property damage.
Do not store items of interest to children
in the cabinets above the appliance. Children climbing on the range to reach items could be seriously injured.
Do not leave children alone. Children should not be
left alone or unattended in the area where an appliance is in use. They should never be allowed to sit
or stand on any part of the appliance.
the risk of tipping of the range, the range must be
secured by properly in- stalled anti-tip screws
)rovided with the range.
Tocheck if the screws are installed properly, raise the lift-up cooktop and
verify that the anti-tip screws are engaged. Refer to the installation
instructions for proper anti-tip screw installation.
lmportantSafetymstructions
DO NOT TOUCH SURFACE UNITS, AREAS NEAR
THESE UNITS, OVEN HEATING ELEMENTS OR iNTE-
RiOR SURFACES OF THE OVEN OR WARMER DRAWER (if equipped). Both surface units and oven
heating elements may be hot even though they are dark in
color. Areas near surface units may become hot enough to cause burns. During and after use, do not touch, or let
clothing or other flammable materials touch these areas
until they have had sufficient time to cool. Among these
areas are the cooktop, surfaces facing the cooktop, the oven vent openings and surfaces near these openings, oven door and window.
Wear Proper Apparel--Loose-fitting or hanging gar-
ments should never be worn while using the appli-
ance. Do not let clothing or other flammable materials contact hot surfaces.
Never use your appliance for warming or
heating the room.
Do Not Use Water or Flour on Grease Fires--Smother
the fire with a pan lid, or use baking soda, a dry chemical or foam=type extinguisher.
When heating fat or grease, watch it closely. Fat or grease may catch fire if allowed to become too hot.
Use Only Dry Potholders--Moist or damp potholders
on hot surfaces may result in burns from steam. Do
not let the potholders touch hot heating surface units or interior oven elements. Do not use a towel or other bulky
cloth instead of a potholder.
Do Not Heat Unopened Food Containers--Build up of
pressure may cause the container to burst and result in injury.
Remove the oven door from any unused appliance if
it is to be stored or discarded.
IMPORTANT--Do not attempt to operate the oven
during a power failure, if the power fails, always turn the oven off. If the oven is not turned off and the power
resumes, the oven may begin to operate again. Food left unattended could catch fire or spoil.
Electronic controllers can be damaged by
cold temperatures. When you use your appliance for the
first time, or if it has not been used for a long period of
time, make sure that it has been exposed to a tempera= ture above 0°C/32°F for at least 3 hours before
connecting it to the power supply.
iMPORTANT iNSTRUCTiONS FOR USING
YOUR COOKTOP
Know which knob controls each surface heating unit.
Use Proper Pan Size--This appliance is equipped with
one or more surface units of different sizes. Select
utensils having flat bottoms large enough to cover the surface unit. The use of undersized utensils will expose a portion of the surface heating unit to direct contact and may result in ignition of clothing. Proper relationship of utensil to the surface unit will also improve efficiency.
Utensil Handles Should BeTurned inward and Should Not Extend Over Adjacent Surface Units--To reduce
the risk of burns, ignition of flammable materials, and
spillage due to unintentional contact with the utensil. The handle of the utensil should be positioned so that it is
turned inward, and does not extend over adjacent surface
unit.
Never Leave Surface Units Unattended--Boilovers cause smoking and greasy spillovers that may ignite, or a
pan that has boiled dry may melt.
Protective liners-- Do not use aluminum foil to line oven
bottom or any other part of the appliance. Only use aluminum foil as recommended for baking if used as a cover placed on the food. Any other used of protective
liners or aluminum foil may result in a risk of electric
shock or fire or a short circuit.
Glazed Cooking Utensils--Only certain types of glass, glass/ceramic, ceramic, earthenware, or other glazed
utensils are suitable for rangetop service without breaking due to the sudden change in temperature. Check the
manufacturer's recommendations for rangetop use.
Do Not Use Decorative Surface Element Covers. If an
element is accidentally turned on, the decorative cover will become hot and possibly melt. Burns will occur if the
hot covers are touched. Damage may also be done to the cooktop.
FOR GLASS COOKTOPS ONLY
Do Not Clean or Operate a Broken Cooktop --if cooktop should break, cleaning solutions and spillovers
may penetrate the broken cooktop and create a risk of electric shock. Contact a qualified technician
immediately.
Clean Cooktop Glass with Caution--If a wet sponge or
cloth is used to wipe spills on a hot cooking area, be careful to avoid a steam burn. Some cleaners can
produce harmful fumes if applied to a hot surface.
Avoid scratching the cooktop glass with sharp
objects.
IMPORTANT INSTRUCTIONS FOR USING
YOUR OVEN
Use Care When Opening Door or Warmer Drawer (if
equipped)--Stand to the side of the appliance when opening the door of a hot oven. Let hot air or steam
escape before you remove or replace food in the oven/
warmer drawer.
Keep Oven Vent Ducts Unobstructed. The oven is
vented at the front above the oven door. Touching the
surfaces in this area when the oven is operating may
cause severe burns. Also, do not place plastic or heat-
sensitive items on or near the oven vent. These items
could melt or ignite.
Placement of Oven/Warmer Drawer (if equipped)
Racks. Always place oven racks in desired location while oven/drawer (if equipped) is cool. Remove all utensils from the rack before removing rack. If rack must be
moved while oven is hot, use extreme caution. Use
potholders and grasp the rack with both hands to
reposition. Do not let potholders contact the hot oven
element or interior of the oven/warmer drawer (if
equipped).
SELF-CLEANING OVENS:
Clean in the self-cleaning cycle only the parts of the oven listed in this owner's guide. Before self-cleaning
the oven, remove the broiler pan and any utensils stored in the oven.
Do not clean the oven door gasket. The door gasket is essential for a good seal. Care should be taken not to rub, damage or move the gasket.
Oven racks. Oven racks color will change if left in the oven during a self-cleaning cycle.
Do not use oven cleaners. No oven cleaner or oven liner protective coating of any kind should be used in or around
any part of the oven.
Remove oven racks. Oven racks color will change if left in the oven during a self-cleaning cycle.
The health of some birds is extremely
sensitive to the fumes given off during the self-clean cycle of any range. Move birds to another well ventilated
room.
SAVE THESE INSTRUCTIONS
Do not use the broiler pan without its insert. The broiler pan and grid allow dripping fat to drain and be kept away
from the high heat of the broiler.
Do not cover the broiler or warmer drawer (if
equipped) grid with aluminum foil. Exposed fat and grease could ignite.
Do not touch a hot light bulb with a damp cloth. Doing so could cause the bulb to break. Disconnect the
appliance or turn off the power to the appliance before
removing and replacing light bulb.
IMPORTANT INSTRUCTIONS FOR CLEANING YOUR RANGE
Clean the range regularly to keep all parts free of
grease that could catch fire. Exhaust fan ventilation
hoods and grease filters should be kept clean. Do not
allow grease to accumulate. Greasy deposits in the fan could catch fire. Refer to the hood manufacturer's instruc-
tions for cleaning.
Cleaners/aerosols--Always follow the manufacturer's recommended directions for use. Be aware that excess
residue from cleaners and aerosols may ignite causing
damage and/or injury.
Left front
control and digital display
(some models)
Broil element
Convection fan cover (some models)
Self-Cleaning Oven
some models)
HE
: U
Left rear control and digital display
(some models)
Right rear
Electronic Oven control and Right front
Controls with digital display control and Clock and Kitchen (some models) digital display
Timer some models)
Oven Vent
Oven Light, Single or Dual (some models)
(2) Adjustable Oven Racks
Piece
DoorHandle
;onvect on
..................................................................................../ gr (some
Broil Pan
Storag
6" Single or8" 6" Single or Single or 5"/7" Warmer 5"/7" Dual
Dual Radiant Zone Radiant Element Element (Varies (some (Varies with with models), models), models).
er (slide-in models only)
Bridge Radiant
Element.
o
6" Single
Radiant Element.
Removabie 8" Coil Eiement
Glass Front Oven
ge
Window Opening
Removabie 6"
Coil Eiement
6" Single c 9" 1, 4 Dual or Single or 6"/9" hot 9"/12" Dual
Dual Radiant surface Radiant Element, (Varies indicator Element (Varies
with models), lights, with models). Note: The features of your range will vary according to model.
4 hot surface
indicator lights.
6
Radiant Element.
Lbie6"
Coil Eiement
wable 8"
Coil Element
Models with Coil Surface Elements
I NOTE: All knobs shown in this owner's Guide are typical only. i
1. Place the pan on the surface element.
2. Push in and turn the surface element control knob to desired setting.
3. The surface signal light will glow when one or more elements are turned on. Always turn
the element off before removing the pan. Note: The size and type of utensil used, and the amount and type of food being cooked will influence the setting needed for best cooking results.
l
OFF
Setting HI (MAX)
5(MED)
Type of Cooking Start most foods, bring water to a boil, pan broiling.
Maintain a slow boil, thicken sauces and gravies, steam
vegetables. 2-4(MED-LOW) LO(MIN)
Keep food cooking, poach, stew.
Keep warm, melt, simmer.
*The suggested settings found in the chart above are based on cooking in medium thickness aluminum pans with lids. Settings may vary when using other types of pans.
Do not place items such as salt and pepper shakers, spoon holders or
plastic wrappings on top of the cooktop when it is in use. These items could melt or ignite. Potholders, towels or wood could catch fire ifplaced too close to the element.
med
Models with Ceramic Glass Cooktop
oo oo oo oo
Model A Model B Model C
Model D Model E
Cooktop radiant areas that heat. Your appliance may
have one of these configurations - Fig. 1
About the Radiant Surface Elements
The element temperature rises gradually and evenly. As the temperature
rises, the element will glow red. To maintain the selected setting, the element will cycle on and off. The heating element retains enough heat to
provide a uniform and consistent heat during the off cycle. For efficient cooking, turn off the element several minutes before cooking is complete. This will allow residual heat to complete the cooking process.
Locations of the Radiant Surface Elements and Controls
Your range isequipped with radiant surface elements with different wattage
ratings. The ability to heat food quicker and in larger volumes increases as the element wattage increases.
The radiant surface elements are located on the cooktop as follows:
Model A (See Fig. 1):
- Two dual 5 or 7 inch radiant element at the right and left rear position;
- Two dual 6 or 9 inch radiant element at the right and left front position;
About the Ceramic Glass Cooktop
The ceramic cooktop has radiant surface elements located below the surface of the glass. The design of the ceramic cooktop outlines the area of the surface element underneath. Make sure the diameter of the pan matches the diameter of the element outline on the cooktop (See Fig. 1).
Heat is transferred upthrough the surface of the cooktop to the cookware. Only flat-bottom cookware should be used. The type and size of cookware, the number of surface elements in use and their settings, are all factors that will affect the amount of heat that will spread to areas beyond the surface elements. The areas surrounding the elements may become hot enough to
cause burns.
Model B (see Fig. 1):
- Two 6 inch radiant elements at the right rear and left front positions;
- A 8 inch radiant element at the left rear position;
- A dual 6 / 9 inch radiant element at the right front position;
Model D shown Only - Fig. 2
NOTE: Please read detailed instructions for ceramic
glass cooktop cleaning in the General Care &
Cleaning section and Before You Call checklist section of this Use and Care Guide.
NOTE: Radiant elements have a limiter that allows the
element to cycle on and off, even at the Hi setting. This helps to prevent damage to the ceramic smooth top. Cycling at the HI setting is normal and can occur
ifthe cookware is too small for the radiant element or
ifthe cookware bottom is not flat (Refer to page 12
under Selecting Surface Cooking Utensils).
NOTE: Due to the high intensity of heat generated by the surface elements, the glass surface will turn green when the element will be turned off. This phenomenon
isnormal and the glass will come back to its original white color after it has completely cooled down (White glass cooktops only).
Model C (see Fig. 1):
- Two 6inch radiant elements atthe right and left rear positions;
- A dual 9 / 12 inch radiant element at the right front position;
- A 9 inch radiant element located at the left front position.
Model D (See Figs. 1 and 2):
- Two 6inch radiant elements atthe right and left rear positions;
- A dual 9/12 inch radiant element at the right front position;
- A 9 inch radiant element located at the left front position;
- AWarmer Zone radiant element located between the right and
left rear positions.
Model E (see Fig. 1):
- A 6 inch radiant element at the right rear position;
- A dual 9 / 12 inch radiant element at the right front position;
- A Bridge radiant element located at the left front & rear positions.
Models with Ceramic Glass Cooktop (continued)
Surface Cooking Settings (Models with Ceramic Glass Cooktop)
Use the chart (Fig. 1)to determine the correct setting for the kind of food you are preparing. The Simmer settings are used to simmer and keep larger quantities of foods warm such as
stews and soups. The lower Simmer settings are ideal for delicate foods and melting chocolate or butter.
Note: The size and type of cookware used will influence the setting needed for best cooking results.
Recommended Settings for Single, Bridge and
Dual Surface Elements
Setting HIGH [Hi)
MEDIUM HIGH (5-8) MEDIUM(5) MEDIUM LOW [2-4/ LOW (Lo - 2)
Type of Cooking
Start most foods, bring water to a boil. pan broiling Continue a rapid boil. fry, deep fat fry Maintain a slow boil. thicken sauces and g ravies, steam vegetables Keep foods cooking, poach, stew Keep warm. melt. simmer
Fig. 1
The electronic surface element control (ESEC)
Radiant
surface elements may appear to have cooled after they have
been turned off. A hot surface indicator light will come on
and will continue to glow until the glass cooktop has cooled
down to a moderate level. The glass surface may still be
hot and burns may occur if the glass surface is touched before the indicator light has
turned off.
Do not place
plastic items such as salt
and pepper shakers, spoon holders or plastic wrappings on top of the range when it
is in use. These items could melt or ignite. Potholders,
towelsorwooden spoonscould catch fire if placed too close
to the surface elements.
The Electronic Surface Element Control ("ESEC") feature includes digital display windows. The ESEC feature provides a numeric digital setting for the radiant surface element positions on the cooktop. These settings work the same way as normal knob setting indicators work except the settings are displayed in digital windows (Figs. 2 thru 5).
The available ESEC Display Settings
The ESEC control provides various heat levels from Hi (Fig. 3) to Lo (Fig. 4) and OFF (Fig. 2).
Use the chart (on top of page) to determine the correct setting for the kind offood you are preparing. The Simmer settings are used to simmer and keep larger quantities offoods warm such as stews and soups. The lower Simmer settings are idealfor delicate foods and melting chocolate
or butter.
Note: The size and type of cookware used will influence the setting needed for best cooking results.
Radiant surface elements may appear to have cooled
after they have been turned off. The Hot surface indicatorlightwill come on and will continue to glow until the glass cooktop has cooled down to a moderate level. The glass surface may still be hot and burns may occur if the glass surface is touched before ithas cooled sufficiently.
g
OFF
hi hi
Fig. 3
OFF
hi hi
Fig. 4 Fig. 5
Do not place plastic items such as salt and pepper shakers, spoon holders or plastic wrappings on top of the range when itis in use. These items could melt or ignite. Potholders, towels or wooden spoons could catch fire ifplaced too close to the surface
elements.
Loading...
+ 21 hidden pages