Frigidaire CGES3065PFF, CGES3065PFK, CGES3065PWG, CGES3065PWH, CPES3085PFA Owner’s Manual

...

Download

.......:::::::: IIIIIII;

IIIIII1:

,,,,,,,

,,,,,,,,,,,,,,,,_

;,;,;,;,;,;,;,;,

........iiiiiiii

::::::::"

:::::::' ,,,,

::::::::

TABLE OF CONTENTS

Product Record and Registration .............. 2

Important Safety Instructions ................. 3

Before Setting Surface Controls ............... 8

Setting Surface Controls .................... 12

Oven Controls ............................ 23

Care and Cleaning ........................ 45

Before You Call ........................... 51

Warranty ................................ 55

Before Setting Oven Controls ................ 20

www.frlgldalre.com USA 1-800-944-9044 www,frlgldaire,ca Canada 1-800-265-8352

Oa r,D

C) C)

r.O C)

t.,O

1'O C)

Need Help? ................................. 2

Product Registration .......................... 2

Product Record and Registration ................. 2

Important Safety Instructions .................... 3

Before Setting Surface Controls .................. 8

Setting Surface Controls ....................... 12

Before Setting Oven Controls ................... 20

Oven Controls ............................... 23

Warmer Drawer (some models) ................ 39

Care and Cleaning ............................ 45

Oven Baking ............................... 51

Before You Call .............................. 51

Warranty .................................... 55

Need Help?

Visit the Frigidaire web site at www.frigidaire.com

Before you call for service, there are a few things you can do to help us serve you better.

Read this Use & Care Manual

This manual contains instructions to help you use and maintain your oven properly.

If You Received a Damaged Oven... Immediately contact the dealer (or builder) that sold you the

oven.

Save Time and Money

Check "Solutions to Common Problems:" on page 52. This section helps step you through some common problems that might occur.

If you do need service, help is only a phone call away. Call Frigidaire customer services at 1-800-944-9044.

Product Registration

Questions?

For toll-free telephone support in the U.S. and Canada call 1-800-944-9044

For online support and Internet production information visit

http://www.frigidaire.com.

Thank you for choosing Frigidaire.

This Use & Care manual is part of our commitment to

customer satisfaction and product quality throughout the service life of your new appliance. We view your purchase as the beginning of a relationship. To ensure our ability to continue serving you, please use this page to record important product information.

Registering your product with Frigidaire enhances our ability to serve you. You can register online at http://

www.frigidaire.com or by dropping your product registra-

tion card in the mail.

Record model and serial numbers here

Purchase Date: Frigidaire model number:

Frigidaire serial number: Serial Plate Location

CAUTIONS AND WARNINGS

Read all instructions before using this appliance. This manual contains important safety symbols and

instructions. Please pay attention to these symbols and follow all instructions given.

Do not attempt to install or operate your appliance until you have read the safety precautions in this manual. Safety items throughout this manual are

labeled with a WARNING or CAUTION statement based on the risk type.

DEFINITIONS

_ This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety message that follow this symbol to avoid possible injury or death.

Indicates a potentially hazardous situation which, if ii not avoided, may result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Storage In or On Appliance--Flammable materials should not be stored in an oven, near surface burners, or in the warmer drawer (if equipped). This includes paper, plastic, and cloth items, such as cookbooks, plastic ware, and towels, as well as flammable liquids. Do not store explosives, such as

aerosol cans, on or near the range.

zJ Ox ,Euazar

• A child or adult can tip the range and be killed.

• Verify the bracket is engaged

with countertop or that the anti-tip device has been

installed to the wails of the cabinet, the wall,

or the floor as per the installation instructions.

• Ensure the anti-tip device is re-engaged with

the countertop, the walls of the cabinet, the

wall, or the floor as per the installation instructions when the range is moved.

• Do not operate the range without the anti-tip device in place and engaged.

• Failure to follow these instructions can result in

death or serious burns to children and adults.

Indicates a short, informal reference-something

written down to assist the memory or for future refer-

ence.

To check if the anti-tip bracket

is installed properly, use both

arms and grasp the rear edge of

range back. Carefully attempt to

tilt range forward. When properly

installed, the range should not tilt

forward.

Refer to the anti=tip bracket installation instructions supplied with your range for proper installation.

Do Not Leave Children Alone - Children should not be left alone or unattended in the area where

appliance is in use. They should never be allowed to sit or stand on any part of the appli- ance, including the storage drawer, lower broiler drawer, warmer drawer, or lower double oven.

Stepping, leaning, or sitting on the door or drawers of this appliance can result in serious injuries and also cause damage to the appliance. Do not allow children to climb or play around the appliance. The weights of a child on an open over door may cause the appliance to tip, resulting in serious burns or other injury. An open drawer when hot may cause burns.

• Never cover any slots, holes, or passages in the oven bottom or cover an entire oven rack with

materials, such as aluminum foil. Aluminum foil : linings may trap heat, causing a fire hazard.

Important Safety Notice - The California Safe Drinking Water and Toxic Enforcement Act requires the governor of California to publish a list of substances known to cause cancer, birth defects, or other reproductive harms, and requires businesses to warn customers of potential exposures to such

substances. Cold temperatures can damage the electronic

control. When using this appliance for the first time, or when the appliance has not been used for an extended period of time, be sure the appliance has been in temperatures above 32°F (0°C) for at least 3 hours before turning on the power to the appliance.

When heating fat or grease, watch it closely. Grease may catch fire if it becomes too hot.

Do not use water or flour on grease fires. Smother fire or flame or use dry chemical or foam-type extinguisher. Cover the fire with a pan lid or use baking soda.

• Use dry potholders. Moist or damp potholders on hot surfaces may result in burns from steam. Do not let potholders touch hot cooking areas. Do not use towels or other bulky cloths.

• Do Not Heat Unopened Food Containers - Build- ! up of pressure may cause container to burst and result in injury.

• Wear Proper Apparel - Loose-fitting or hanging garments should never be worn while using the appliance. Do not let clothing or other flammable

materials contact hot surfaces.

Do not touch surface heating units or surface cooking elements, areas near these units or elements, interior surface of the oven, or the warmer drawer (if equipped). Surface heating areas and oven heating elements may be hot even though they appear cool. Areas near surface cooking units may become hot enough to cause burns. During and after use, do not touch, or let clothing or other flammable materials touch these areas until they are cool. These areas may include the cooktop, surfaces facing the cooktop, oven vent areas, oven door,

and oven window.

• Do not store items of interest to children in the cabinets above a range. Children climbing on the

range to reach items could be seriously injured.

Do not attempt to operate the appliance during a power failure. If the power fails, always turn off the unit. If the unit is not turned off and the power resumes, the appliance will not operate and an error message will be displayed. Once the power resumes, reset the clock and the oven function.

Do not use oven or warmer drawer (if equipped) for storage. Never use your appliance as a space

heater to heat or warm the room.

IMPORTANT INSTRUCTIONS FOR USING YOUR

COOKTOP

Readandfollowthe belowinstructionsandprecau- tionsfor unpacking,installing,andservicingyour appliance:

Removealltapeandpackagingbeforeusingthe appliance.Destroythecartonandplasticbags afterunpackingtheappliance.Neverallow childrento playwithpackagingmaterial.Donot removethewiringlabelandotherliterature attachedtotherange.Donotremovemodel/ serialnumberplate.

ProperInstallation--Besureyourapplianceis properlyinstalledandgroundedbyaqualified

technicianinaccordancewiththeNationalElec- tricalCodeANSI/NFPANo.70latesteditionand localelectricalcoderequirements.InCanada,

installinaccordancewithCSAStandardC22.1, CanadianElectricalcode,Partl-latest edition, andlocalelectricalcoderequirements.Install onlyperinstallationinstructionsprovidedinthe literaturepackageforthisrange.

UserServicing--Donotrepairor replaceany partoftheapplianceunlessspecificallyrecom- mendedinthemanuals.Allotherservicing shouldbedoneonlybyaqualifiedtechnician. Thisreducestheriskof personalinjuryand damageto theoven.

Askyourdealerto recommendaqualifiedtechni-

cianandanauthorizedrepairservice.Knowhow todisconnectthepowertotheapplianceatthe

circuitbreakerorfuseboxincaseofan emer- gency.

Nevermodifyoraltertheconstructionofanoven byremovingthelevelinglegs,panels,wire covers,anti-tipbrackets/screws,oranyother partoftheoven.

Removetheovendoorfromanyunusedovenif itisto bestoredordiscarded.

• Besuretohaveanappropriatefoam-typefire extinguisheravailable,visible,andeasilyacces- siblelocatedneartheappliance.

Know which knob or key controls each surface heating area. Place cookware with food on the cooking area before turning it on. Turn the cooking area off before removing the cookware.

Use proper pan size. This appliance is equipped with one or more surface units of different sizes.

Select cookware with flat bottoms that match the surface unit heating element. The use of under-

sized cookware may expose a portion of the heating element to direct contact and may result in the ignition of clothing or other items. Using the proper cookware on the cooking zone will improve efficiency.

To reduce the risk of burns, ignition of flammable materials, and spills due to unintentional contact with the utensil, the utensil handles should be turned inward and not extend over other cooking

areas. Never leave surface elements unattended. Boil-

overs may cause smoking and greasy spills may ignite. A pan that has boiled dry could be damaged and may damage the cooktop.

Improper cookware may break due to sudden changes in temperature. Check the cookware manufacturer's recommendations for cooktop use.

When you are flaming foods under a ventilating hood, turn on the fan.

Glazed Cooking Utensils--Only certain types of glass, glass/ceramic, ceramic, earthenware, or other glazed utensils are suitable for cooktop service without breaking due to the sudden change in temperature. Check the manufacturer's recom- mendations for cooktop use.

Do Not Use Decorative Surface Burner Covers. If an element is accidentally turned on, the decora-

tive cover will become hot and possibly melt. Burns will occur if the hot covers are touched.

Damage may also be done to the cooktop. Do not use Searing grill on the cooktop. The

Searing grill is not designed for use on the cooktop. Doing so may result in a fire.

IMPORTANT INSTRUCTIONS FOR USING YOUR OVEN

Use care when opening oven door, lower oven door, or warmer drawer (some models). Stand to the side of the appliance when opening the door of a hot range. Let hot air or steam escape before you remove or replace food in the oven.

Keep oven vent ducts unobstructed. Touching surfaces in this area when the oven is on may cause severe burns. Do not place plastic or heat-

sensitive items on or near the oven vent. These items can melt or ignite.

Placement of Oven Racks - Always place oven racks in desired location while oven is cool. If rack

must be moved while oven in hot, do not let • potholder contact hot heating element in oven. Use potholders and grasp the rack with both hands to reposition. Do not let potholders contact the hot heating elements in the oven. Remove all cookware and utensils before moving the rack.

Do not use a broiler pan without its insert. Broiler pans and inserts allow dripping fat to drain away from the high heat of the broiler. Do not cover the broiler insert with aluminum foil; exposed fat and grease could ignite.

Protective Liners--Do not use aluminum foil to line oven bottom or any other part of the appliance.

Only use aluminum as recommended for baking if used as a cover placed on the food. Any other use of protective liners or aluminum foil may result in a

risk of electric shock or fire or a short circuit.

• Do not cook food on the oven bottom. Always cook in proper cookware and always use the over racks.

FOR GLASS COOKTOP ONLY

Do Not Clean or Operate a Broken Cooktop. If cooktop should break, cleaning solutions and spillovers may penetrate the broken cooktop and create a risk of electric shock. Contact a qualified technician immedi- ately.

Clean Cooktop Glass with Caution. If a wet sponge or cloth is used to wipe spills on a hot cooking area, be

careful to avoid a steam burn. Some cleaners can produce harmful fumes if applied to a hot surface.

Avoid Scratching the cooktop glass with sharp objects.

IMPORTANT INSTRUCTIONS FOR CLEANING

YOUR OVEN

Before manually cleaning any part of the appliance, be sure all controls are turned off and the range is cool. Cleaning a hot oven can cause burns.

............................. ali parts flee of

grease that could catch fire. Pay particular attention to the area around each surface element.

Do not allow grease to accumulate. Greasy deposits in the fan could catch fire. Follow the manufacturer's instructions for cleaning hoods.

Always follow the manufacturer's recommended directions for use of kitchen cleaners and aerosols.

Be aware that excess residue from cleaners and aerosols may ignite causing damage and injury.

Clean ventilating hoods frequently. Grease should not be allowed to accumulate on the hood or filter.

Follow the manufacturer's instructions for cleaning hoods.

Do not touch a hot oven light bulb with a damp cloth. Doing so could cause the bulb to break. Disconnect the appliance or shut off the power to the appliance before removing and replacing the

bulb.

SELF-CLEANING OVENS

Clean only the parts listed in this manual. Before using self-clean, remove the broiler pan, any food, utensils, and cookware from the oven.

Do not use oven cleaners. No commercial oven cleaner or oven liner protective coating of any kind

should be used in or around any part of the appliance.

Do not clean the oven door gasket. The door gasket is essential for a good seal. Care should be taken not to rub, damage, or move the gasket.

Some birds are extremely sensitive to the fumes given off during the self-clean cycle of any oven.

Move birds to another well-ventilated room.

• Remove oven racks. Oven racks color will change if left in the oven during a self-cleaning cycle.

GROUNDING INSTRUCTIONS

Do not use an adapter plug or an extension cord, or remove grounding prong from the power cord.

i Failure to follow this warning may cause seriousinjury, fire, or death.

For personal safety, this appliance must be properly grounded.

For models factory-equipped with a power cord: For maximum safety, the power cord must be plugged

into an electrical outlet that is the correct voltage, is correctly polarized, and is properly grounded in accor-

dance with local codes.

For ovens to be wired into a junction box:

It is the personal responsibility of the consumer to have the appropriate outlet with the correct, properly grounded wall receptacle installed by a qualified elec- trician. See the installation instructions packaged with this appliance for complete installation and grounding

instructions.

Avoid fire hazard or electrical shock. Do not use an

adapter plug or an extension cord, or remove grounding prong from the power cord. Failure to follow this warning may cause serious injury, fire, or

death.

See the installation instructions packaged with this appliance for complete installation and grounding

instructions.

iili

Using Proper Cookware

The size and type of cookware used will influ-

ence the radiant element power level setting

needed for best cooking results. Be sure to follow

the recommendations for using proper cookware

as illustrated in Figure 1 and Figure 2.

Figure 1: Testing cookware Check for flatness by rotating a ruler across the bottom of

the cookware (See Figure 1). Cookware should have flat bottoms that make good contact with the entire surface heating element (See Figure 2). For detailed information about the ceramic cooktop, refer to the"Cooktop Mainte- nance" on page 47.

Cookware Material Types

The cookware material determines how evenly and quickly heat is transferred from the surface element to the pan bottom. The most popular materials available are:

Aluminum - Excellent heat conductor. Some types of food

will cause it to darken (Anodized aluminum cookware

resists staining and pitting). If aluminum pans slide across the ceramic cooktop, they may leave metal marks which will resemble scratches. Remove these marks immediately.

Copper - Excellent heat conductor but discolors easily (See Aluminum).

Stainless - Slow heat conductor with uneven cooking results. Is durable, easy to clean and resists staining.

Cast Iron - A slow heat conductor however will retain heat very well. Cooks evenly once cooking temperature is

reached. Not recommended for use on ceramic cooktops. Porcelain-enamel on metal - Heating characteristics will

vary depending on base material. Porcelain-enamel coating must be smooth to avoid scratching ceramic cooktops.

Glass - Slow heat conductor. Not recommended for ceramic cooktop surfaces because it may scratch the glass.

Flat bottom and straight

sides.

Tight fitting lids.

• Weight of handle does not tilt pan. Pan is well

balanced.

• Pan sizes match the amount of food to be

prepared and the size

of the surface element.

• Made of material that conducts heat well.

Easy to clean.

• Always match pot diameter to element

size.

Figure 2:

Proper cookware placement

Curved and warped pans.

Cookware larger than

cooking area marked on cooktop by more than

one-half inch or 12mm.

Heavy handle tilts pan.

Pan is smaller than the

heating area marked on

cooktop.

Do not place empty aluminum, glass or porcelain-enamel coated cookware on the ceramic cooktop! The melting point of cookware made with these materials may be reached quickly especially if left empty, and they may

bond to the ceramic cooktop. If the cookware melts it will !_ damage the cooktop! Be sure to follow all the cookware

manufacturer s suggestions when using any type of cookware on the ceramic cooktop. !i

Due to the high intensity of heat generated by the surface elements, the glass surface will turn green when the

element is turned off. This phenomenon is normal and the glass will come back to its original white color after it has ;i

completely cooled down. (White glass cooktops only).

About the Ceramic Glass Cooktop

The ceramic cooktop has radiant surface elements located below the surface of the glass. The design of the ceramic cooktop outlines the area of the surface element under- neath. Be sure to match the pan size with the diameter of the element outline on the cooktop and only flat-bottomed

cookware should be used. The type and size of cookware, the number of surface

elements in use and their settings are all factors that will affect the amount of heat that will spread to areas beyond the surface elements. The areas surrounding the elements may become hot enough to cause burns.

About the Radiant Surface Elements

The element temperature rises gradually and evenly. As the temperature rises, the element will glow red. To maintain the selected setting the element will cycle on and off. The heating element retains enough heat to provide a uniform and consistent heat during the off cycle.

For efficient cooking, turn off the element several minutes before cooking is complete. This will allow residual heat to complete the cooking process.

Element ON & hot surface indicator lights

Radiant elements have a limiter that allows the element to cycle on and off, even at the HI setting. This helps to

prevent damage to the ceramic smooth top. Cycling at the HI setting is normal and can occur if the cookware is too

small for the radiant element or if the cookware bottom is not flat.

Be sure to read detailed instructions for ceramic glass cooktop cleaning in the General Care & Cleaning section

and Before You Call checklist section of this Use and Care Guide.

iiiii

Your appliance is equipped with two different types of radiant surface control indicator lights that will glow on the backguard- the Element On indicator light and the hot surface indicator lights.

The element ON indicator lights are located on the control panel between the two radiant element control knob and will glow when a surface element is turned ON.

,q//

O off o off

hi hi hi [o

cooktop @

Lo Lo

Figure 3: Element ON indicator light locations

The electronic surface element control (ESEC) (some models)

The Electronic Surface Element Control (ESEC) feature includes digital display windows. The ESEC feature provides a numeric digital setting for the radiant surface element positions on the cooktop. These settings work the same way as normal knob setting indicators work except the settings are displayed in digital windows.

The available ESEC display settings

The ESEC control provides various heat levels from Hi (Figure 4) to Lo (Figure 5) and OFF (Figure 4). The settings

between 3.0 and 9.5 increase or decrease in increments of .5 (1/2). The settings between 1.2 and 3.0 are Simmer

settings which decrease or increase in increments of.2 (1/5) to Lo (Figure 5; lowest Simmer setting) for more precise settings at lower heat levels. Use the Recommended Surface Setting Chart to determine the correct setting for the kind of food you are preparing.

OFF OFF

hi hi (oLO

)

ESEC hot element indicator message (HE) After using any of the single or dual radiant element

positions the cooktop will become very hot. Even after turning the control knob to OFF, the cooktop will remain hot

for some time. The ESEC control monitors the temperature

of the cooktop and displays the message "HE" (hot element) warning when the cooktop is still too hot to touch (See Figure 6). If the HE message appears in the window, the control can still be turned on again for use.

OFF

hi to

Figure 6: Hot element indicator message

ESEC power failure indicator (00)

When the range is first plugged in or when the power supply to the range has been interrupted, the ESEC control will display the message "00". After a few seconds the "00" message will disappear from the display.

Figure 4: OFF position (L) and Hi position (R)

OFF OFF

hi hi (o

)

Figure 5:

Lo position (L) and 5.0 position (R)

Figure 7: Er indicator message (L) and ESEC lockout feature (R)

ESEC Lockout Feature (- -)

The ESEC feature will not operate during a Self-Clean cycle or when the Lockout feature is active. Whenever the

Lockout feature is active, "- -" will appear in any ESEC digital display windows to show that all surface elements can not be activated (See Figure 7).

ESEC error indicator message (Er)

An error message will be displayed (glowing "Er") at power up (or after a power failure) if ANY of the surface control knobs were left in the ON positions (See Figure 7). If a power failure should occur, be sure to set all of the surface control knobs to the OFF position. This will reset the surface

controls. Once the surface controls have been set to the OFF posi-

tions, the surface controls should return to normal opera- tion. If the surface controls do not function and the "Er"

message remains in any display after following these proce- dures, contact your authorized servicer for assistance.

Cooktop Sabbath Day Feature and (Sb) Message

The ESEC will display the Sb messages whenever the Sabbath Day feature is active. When activated, the Sabbath Day feature works for both the oven and cooktop together. Once the Sabbath Day feature is active, changes to the heat levels for the cooktop elements will not show in the displays. The cooktop will react slower to heat level changes. To set the Sabbath Day feature, refer to "Setting the Sabbath Feature (For use on the Jewish Sabbath and Holidays)" on page 38.

Home Canning

Canning can generate large amounts of steam. Use extreme caution to prevent burns. Always raise the lid to vent steam away from you. Safe canning requires that harmful micro-organisms are destroyed and the jars are sealed completely. When canning in a water bath canner, a gentle but steady boil must be maintained continuously for the required time.

Be sure to read and observe all the following points when home canning with your appliance. Check with the USDA (United States Department of Agriculture) Web site and be sure to read all the information they have available as well as follow their recommendations for home canning proce-

dures.

Use only quality flat bottom canners when home canning. Use a straight-edge to check canner bottom.

Use only a completely flat bottom canner with no ridges that radiate from the bottom center when home

canning. Heat is spread more evenly when the bottom surface is flat.

Make sure the diameter of the canner does not exceed

1 inch beyond the surface element markings or burner.

It is recommended to use smaller diameter canners on electric coil and ceramic glass cooktops and to center

canners on the burner grates. Start with hot tap water to bring water to boil more

quickly. Use the highest heat seating when first bringing the

water to a boil. Once boiling is achieved, reduce heat to lowest possible setting to maintain that boil.

Use tested recipes and follow instructions carefully. Check with your local Cooperative Agricultural Extension Service or a manufacturer of glass jars for the latest canning information.

It is best to can small amounts and light loads. Do not leave water bath or pressure canners on high

heat for an extended amount of time.

• Alternate surface units between each batch to allow the units and surrounding surfaces to cool down. Try to

avoid canning on the same burner unit all day.

Surface cooking settings

The size and type of utensil used, and the amount and type of food being cooked will influence the surface element power level setting needed for best cooking results.

Use Table 1 to determine the correct setting for the type of

food you are preparing.

The size and type of cookware used will influence the i setting needed for best cooking results.

Table 1:

Setting

HIGH (HI)

MEDIUM HIGH (8-10)

MEDIUM (6)

Medium LOW (2-4)

Recommended settings for surface elements

Type of Cooking

Start most foods; bring water to a boil and pan broiling.

Continue a rapid boil; frying, deep fat frying

Maintain a slow boil; thicken sauces and gravies; steaming vegetables

Keep foods cooking; poaching and stewing

Start most cooking operations on a higher setting and then turn to a lower setting to finish cooking.

A glowing red surface heating area extending beyond the bottom edge of the cookware indicates the cookware is

too small for the surface heating area.

The size and type of utensil used, and the amount and type of food being cooked will influence the settings needed for best cooking results.

The surface control knobs do not have to be set exactly on a particular spot. Use the graphics provided as a guide and adjust the control knob as needed. Each surface element provides a constant amount of heat at each

setting. Refer to Table 1 for suggested power level settings.

LOW (LO)

Radiant elements have a limiter that allows the element to cycle on and off, even at the HI setting. This helps to

prevent damage to the ceramic smooth top. Cycling at the HI setting is normal and can occur if the cookware is too

small for the radiant element or if the cookware bottom is not flat.

For efficient cooking, turn off the element several minutes before cooking is complete. This will allow residual heat to complete the cooking process.

Keep warm, melting and simmering

Single radiant surface elements (all models)

The cooktop has 2 or 3 SINGLE radiant surface elements: the left rear position, the right rear position. The left rear element may also be used with the Bridge element.

hi off Lo

Figure 8: Control knob shown is typical only

Do not allow aluminum foil, empty glass/porcelain cookware or any material that can melt to make contact with the ceramic cooktop. If these items melt on the ii cooktop they may damage the ceramic cooktop.

To Operate the Single Radiant Surface Elements:

1. Place correctly sized cookware on the radiant surface element.

Push in and turn the surface control knob in either direction to the desired setting (See Table 8). Start most

cooking operations on a higher setting and then turn to a lower setting to finish cooking. Each surface element provides a constant amount of heat at each setting. A glowing red surface heating area extending beyond the bottom edge of the cookware indicates the cookware is too small for the surface heating area.

When cooking has completed, turn the surface control knob to OFF before removing the cookware.

Radiant surface elements may appear to have cooled after they have been turned off. HE (Hot Element) message (Models B & C) or the hot surface indicator light (Model A) will turn on and will continue to glow until the glass cooktop has cooled down to a moderate level. The glass surface may still be hot and burns may occur if the glass surface is touched before the indicator light has turned OFF. The message may remain on even though

the controls are turned OFF.

Do not place plastic items such as salt and pepper shakers, spoon holders or plastic wrappings on top of the range when it is in use. These items could melt or ignite. Potholders, towels or wooden spoons could catch fire if

placed too close to the surface elements.

The surface "Element On" indicator lights will glow when ,_ one or more elements are turned on. A quick glance at

these indicator lights when cooking is finished is an easy check to be sure all surface elements are turned off.

!i_ ....

Dual Surface Radiant Element (all models)

The cooktop is equipped with 1 or 2 dual radiant surface elements located at the left front and the right front or the right rear position. Symbols around the knob are used to

indicate which coil of the dual radiant element will heat. The symbol with the center circle blackened indicates that only

the inner coil will heat (See Figure 9). The symbol with both coils blackened indicates that both inner and outer coils will

heat (See Figure 9). You may switch from either coil setting at any time during cooking.

Radiant surface elements may appear to have cooled after they have been turned off. HE (Hot Element) message or the hot surface indicator light will turn on and

will continue to glow until the glass cooktop has cooled

down to a moderate level. The glass surface may still be hot and burns may occur if the glass surface is touched

before the indicator light has turned off. The message may remain on even though the controls are turned off.

To Operate the Dual Surface Element:

1. Place correctly sized cookware on the dual surface element.

, Push in and turn the control knob to the inner coil

symbol for smaller cookware or to inner and outer coil symbol for larger cookware (See Figure 9). Turn the knob to adjust the setting if needed. Start most cooking operations on a higher setting and then turn to a lower setting to finish cooking. Each surface element provides a constant amount of heat at each setting. A glowing red surface heating area extending beyond the bottom edge of the cookware indicates the cookware is too small for the surface heating area.

o o off

off hi

hi hi hi

Do not allow aluminum foil, empty glass/porcelain cookware or any material that can melt to make contact

with the ceramic cooktop. If these items melt on the

The surface "Element On" indicator lights will glow when one or more elements are turned on. A quick glance at these indicator lights when cooking is finished is an easy

check to be sure all surface elements are turned off.

[o [0

[o [o

Figure 9: Inner coil operation (L) and inner/outer coil operation (R)

3. When cooking has completed, turn the surface control knob to OFF before removing the cookware.

Radiantelementshavealimiterthatallowstheelementto cycleonandoff,evenattheHIsetting.Thishelpsto

preventdamagetotheceramicsmoothtop.Cyclingatthe HIsettingisnormalandcanoccurifthecookwareistoo

smallfortheradiantelementorifthecookwarebottomis notflat.

Forefficientcooking,turnofftheelementseveralminutes beforecookingiscomplete.Thiswillallowresidualheat tocompletethecookingprocess.

Startmostcookingoperationsonahighersettingand thenturntoalowersettingtofinishcooking.

Aglowingredsurfaceheatingareaextendingbeyondthe

bottomedgeofthecookwareindicatesthecookwareis toosmallforthesurfaceheatingarea.

Thesurfacecontrolknobsdonothavetobesetexactly onaparticularspot.Usethegraphicsprovidedasaguide andadjustthecontrolknobasneeded.Eachsurface elementprovidesaconstantamountof heatateach setting.RefertoTable1forsuggestedpowerlevel

settings.

Triple Surface Radiant Element (some models)

Some cooktops are equipped with a triple radiant surface element. Symbols around the knob indicate which element

will heat. The symbol with the center circle blackened

indicates that only the inner coil will heat. The symbol with two elements blackened indicates that both elements will

heat. The symbol with three elements blackened indicates that all three elements will heat (See Figure 10.) You may switch from either setting at any time during cooking.

Heating with inner (small)

element only

Areas that heat are shown darkened.

Heating 2 of 3 Heating with al{

portions 3 portions

Figure 10: Single (L), double (M), and Triple (R)

Radiant surface elements may appear to have cooled after they have been turned off. HE (Hot Element) message or the hot surface indicator light will turn on and

will continue to glow until the glass cooktop has cooled

down to a moderate level. The glass surface may still be hot and burns may occur if the glass surface is touched before the indicator light has turned off. The message may remain on even though the controls are turned off.

The surface "Element On" indicator lights will glow when one or more elements are turned on. A quick glance at these indicator lights when cooking is finished is an easy

check to be sure all surface elements are turned off. :!

.......................................................................... _j

To Operate the Triple Surface Element:

1. Place correctly sized cookware on the triple surface element.

Push in and turn the control knob to the inner element symbol for smaller cookware or to inner and outer

element symbol for larger cookware (See Figure 11). Turn the knob to adjust the setting if needed. Start most cooking operations on a higher setting and then turn to a lower setting to finish cooking. Each surface element provides a constant amount of heat at each setting. A glowing red surface heating area extending beyond the bottom edge of the cookware indicates the cookware is too small for the surface heating area.

To activate and use the triple element, push in and turn the knob to the left for the outer element symbol for larger cookware. Push the Triple Zone switch to the ON position (See Figure 11).

When cooking has completed, push the Triple Zone switch to the OFF position and turn the surface control knob to OFF before removing the cookware.

placed too close to the surface elements.

Do not allow aluminum foil, empty glass/porcelain cookware or any material that can melt to make contact

with the ceramic cooktop. If these items melt on the

cooktop they may damage the ceramic cooktop.

@ off o

hi hi

TRIPLEZONE

OFF

Figure 11: Triple radiant element

Radiant elements have a limiter that allows the element to cycle on and off, even at the HI setting. This helps to

prevent damage to the ceramic smooth top. Cycling at the HI setting is normal and can occur if the cookware is too

small for the radiant element or if the cookware bottom is not flat.

For efficient cooking, turn off the element several minutes before cooking is complete. This will allow residual heat to complete the cooking process.

Start most cooking operations on a higher setting and then turn to a lower setting to finish cooking.

A glowing red surface heating area extending beyond the

bottom edge of the cookware indicates the cookware is too small for the surface heating area.

settings.

Bridge surface radiant element (some models)

The cooktop of your appliance is equipped with a "BRIDGE" surface element located at the left front and middle posi- tions. The Bridge can be used when cooking with rectan- gular (like a griddle) or oval shaped cookware. The element

will maintain an even temperature setting across both

portions of the Bridge. If needed for normal cookware, the Bridge element can work like a single element without the Bridge (See Figure 13). The circle symbol indicates that only the front potion will heat (SeeFigure 13). The bridge symbol indicates that both front and middle portions will heat (See Figure 13). You may switch from either coil setting at any time during cooking.

Radiant surface elements may appear to have cooled after they have been turned off. HE (Hot Element) message will turn on and will continue to glow until the glass cooktop has cooled down to a moderate level. The glass surface may still be hot and burns may occur if the glass surface is touched before the indicator light has turned OFF. The message may remain on even though

the controls are turned OFF.

To Operate the Bridge Radiant Element:

1. Place correctly sized cookware on the dual surface

element.

Push in and turn the control knob as shown in Figure 12 to heat the front portion of the Bridge element for normal shaped cookware or for larger or rectangular shaped cookware. Turn the knob to adjust the setting if needed. Start most cooking operations on a higher setting and then turn to a lower setting to finish cooking. Each surface element provides a constant amount of heat at each setting. A glowing red surface heating area extending beyond the bottom edge of the cookware

indicates the cookware is too small. Please note that not all cookware will fit the Bridge element correctly.

OFF o _ OFF o

hi hi hi hi

"" [o Lo'" "" [o [o °"

Do not allow aluminum foil, empty glass/porcelain cookware or any material that can melt to make contact

i with the ceramic cooktop. If these items melt on the

cooktop they may damage the ceramic cooktop.

The surface "Element On" indicator lights will glow when one or more elements are turned on. A quick glance at

these indicator lights when cooking is finished is an easy i check to be sure all surface elements are turned off.

Figure 12: Front portion control knob (L) and control knob for rectangular shaped cookware (R)

3. When cooking has completed, turn the surface control

knob to OFF before removing the cookware.

Figure 13: Front portion only (L), front & middle portions (M), and front & Middle plus left rear (R)

The BRIDGE element may also be used in combination

with the left rear single element (See Figure 13). When

using with the bridge, both controls should be set at the same level. Because these elements have two different

controls, one element can be used to cook while the other element may be used to keep food warm.

Keep warm zone (some models)

The purpose of the keep warm zone is to keep hot cooked

foods at serving temperature. Use the keep warm feature to

keep cooked foods hot such as: vegetables, gravies, casse- roles, soups, stews, breads, pastries and oven-safe dinner plates.

Always start with hot food. It is not recommended to heat cold food on the keep warm zone. All food placed on the keep warm zone should be covered with a lid to maintain quality.

For best results, when warming pastries or breads, the cover should have an opening to allow moisture to escape. Do not use plastic wrap to cover food. Plastic may melt onto the surface and be very difficult to clean. Use only plates, utensils and cookware recommended for oven and cooktop use on the keep warm zone.

The keep warm zone will not glow red when it is hot, but becomes hot enough to cause burns. Avoid placing hands on or near the keep warm zone until the keep

warm zone hot surface indicator light is OFF. Always use

potholders or oven mitts when removing food from the keep warm zone as cookware and plates will be hot.

To Set the keep warm zone control:

1. Place cookware on the warmer zone.

2. Press the onooff key for the warm zone control

position. The keep warm indicator light will turn on.

If no further pads are touched within 25 seconds the

The controls and indicator light are located on the control

i request to power the keep warm zone on will clear. Also, !

panel, i:

3. Press the temp key until desired temperature setting is displayed.

4. When it is time to serve the food, press the onooff key once to turn the keep warm zone off. The keep warm zone indicator light will turn off.

Keep warm zone temperature selection

Refer to Table 2 for recommended heating levels. Ifa partic- ular food is not listed, start with the medium level, and adjust as needed. Most foods can be kept at serving temperatures by using the medium level.

Table 2:

Warm zone recommended food settings

Do not allow aluminum foil, empty glass/porcelain cookware or any material that can melt to make contact

with the ceramic cooktop. If these items melt on the

cooktop they may damage the ceramic cooktop.

Food Item

Breads/Pastries Casseroles

Dinner plates with food

Eggs

Gravies Meats Sauces

Soups (cream) Stews

Vegetables

Fried foods

Hot beverages Soups (liquid)

Heating Level

Io (Low) Io (Low) Io (Low) Io (Low)

Io (Low) med (Medium) med (Medium) med (Medium) med (Medium) med (Medium)

hi (High) hi (High) hi (High)

Oven vent location

The oven is vented as shown below. When the oven is on,

warm air is released through the vent. This venting is

necessary for proper air circulation in the oven and good baking results. Do not block oven vent. Never close off the openings with aluminium foil or any other material. Steam or moisture may appear near the oven vent. This is normal.

Figure 14: Do not block oven vent location

A'lway id o ov n _m'it_wh us'i i oven. When cooking, the oven interior and exterior, oven

racks, and cooktop will become very hot which can cause

:_burns.

Protective Liners i Do not use aluminum foil to line the oven bottom. Only use aluminum foil as recommended in

this manual. Improper installation of these liners may result in risk of electric shock or fire.

Removing, replacing, and arranging flat or offset oven racks

To arrange - Always arrange the oven racks when the oven is cool (prior to operating the oven).

To remove - Pull the oven rack straight forward until it reaches the stop position. Lift up front of oven rack slightly

and slide out. To replace - Place the oven rack on the rack guides on both

sides of oven walls. Tilt the front of oven rack upward slightly and slide the oven rack back into place. Be sure oven racks are level before using.

Type of oven racks

oven rack

na[__ __tlat hand'_

oven rack _ _4_

half oven rack

Effortless TM oven rack

Flat half oven rack - Closed position

Figure 15: Oven rack types Oven Rack Descriptions

The Flat Oven Handle Rack has a handle to facilitate the sliding of the rack when large amount of foods

weigh on it. The Flat Oven Half Rack has a removable insert that

can provide extra space for larger food items. The right half rack portion may still be used for other food items like a casserole dish. To remove the insert, squeeze on

the left front insert side of the rack and tilt out clockwise. To reinstall, insert rear hooks at back of insert and lay

insert down. Make sure both insert front hooks snap into rack.

The Offset Oven Rack is used to maximize cooking space. The offset rack can be used in the lower rack position to roast large cuts of meat and poultry.

Air circulation in the oven For best air circulation when baking, allow a space of 2

inches (5 cm) around the cookware for proper air circula- tion. Be sure pans and cookware do not touch each other, the oven door, sides, or back of the oven cavity.

Hot air must be able to circulate around cookware for even heat to reach the food.

Effortless TMOven Rack system Some models are equipped with a special oven rack

system that automatically extends the oven rack to assist in access to your food items. This rack extends when the oven door is opened or closed.

Remove all oven racks and accessories before starting a self-clean cycle. If the oven racks are left in the oven during the self-clean cycle, the gliding ability of the Effort- less TMOven Rack system will be damaged, and oven racks will loose their shiny finish and may turn blue. Remove all oven racks and clean according to instruc- tions provided in the Care & Cleaning section of this

manual. Make sure the oven and oven racks are completely cool

before attempting to assemble or disassemble the Effort- less TMOven Rack system. Never pick up hot oven racks or parts.

To assemble the Effortless TMOven Rack system:

Locate all required parts. You will need the supplied oven rack (Effortless TMOven Rack is a flat rack with a special dark coating on the left and right rack sides) and the two supplied chrome connector arms.

Open the oven door. Be sure the oven is completely cool before proceeding.

Place the oven rack in positions 2, 3, or 4 only. Be sure the rack connector brackets are at the rear of the range and pointing towards oven bottom (See Figure 16).

rack connector bracket

door connector

bracket

/ i

Figure 17:

While holding the connector arm in place, twist the

Connector arm/door connection

connector arm so the ends of the connector arm point upwards (Figure 19). The connector arm should now be locked into position.

Repeat steps 4 and 5 for the other connector arm.

Once both connector arms are properly in place, be sure to test the oven rack operation by gently closing

the oven door. The oven rack should move in and out of the oven freely when the door is opened or closed.

connector

arm

open oven

door

oven rack

connector

a(m

Figure 16: Bracket must be at rear of the range

4. Assemble one connector arm at a time. With the oven

door open and the oven rack in place, install one end of the connector arm to the hole in the door connector

bracket (Figure 17) and the other end in the hole in the rack connector bracket (Figure 18). The oven rack may need to be adjusted in or out in the rack position to match the length of the connector arm.

Figure 18: Assembly of the Effortless TMoven rack

connector

arm

le_ftand right ............... _'-_

door connector

brackets

with connector arm ends

shown in locked position

(pointing upwards)

End should point up, as

explained in Step 5

connector

arm

End should point up, as

explained in Step 5

Figure 19:

Effortless TMoven rack after assembly

Figure 20: Left & right brackets, pointing up

GalleryModel(above)ProfessionalModel(below)

OvenControls Features

Toget the best use of your oven, take some time to become

familiar with the various features and functions of you oven

model. Detailed instructions on using each oven feature and function of the controls can be found in this section of

the owner's manual.

1. Steam Clean -- Use for steam clean function.

2. Delay Start -- Use to program a delayed time bake or

delayed self-cleaning cycle start time.

3. Set Clock -- Use along with the numeric keypad to set the time of day.

4. Oven Light -- Use to turn the oven light on and off.

5. Self Clean -- Use to select self-clean function.

6. Bake Time -- Use to enter the length of baking time.

7. Timer on-off-- Use to set or cancel the timer. Timer does not start or stop the cooking process.

8. Oven Lockout -- Use to lock the oven door and the control panel.

9. Bake-- Use to select the bake cooking feature.

10. Broil -- Use to select broil cooking feature.

11. Convect -- Use to select between convection bake, convection roast, and convection broil (some models).

12. Warm -- Use to keep food and dishes warm.

13. Probe -- Use to monitor internal temperature of food for required doneness.

14. Quick Preheat (Gallery Mode)/Powerplus Preheat (Professional Model) -- Use to raise oven to preheat

temperature.

15. Convect Convert -- Use to convert regular recipe temperature to convection recipe temperature.

16. Slow Cook (some models) -- Use for cooking foods requiring long cooking times with lower temperatures.

17. My Favorites (some models) -- Use to program and save favorite recipes settings.

18. Start -- Use for starting all cooking features.

19. Numeric Keypad -- Use to enter temps and times.

20. Off -- Use to turn off any oven function entered except time of day and minute timer.

21. Warmer Drawer-- Keeps cooked food at warm temps.

22. Warm Zone-- Keeps hot cooked food at serving temps.

Table 3:

Minimum and maximum control settings

Feature Mode Minimum Temp./Time Maximum Temp./Time

Preheat 170°F (77°C) 550°F (288°C) Bake 170°F (77°C) 550°F (288°C) Broil 400°F (205°C) 550°F (288°C) Convection Bake 170°F (77°C) 550°F (288°C) Convection Roast 170°F (77°C) 550°F (288°C) Convection Broil 400°F (205°C) 550°F (288°C) Slow Cook Lo 225°F (108°C) Hi 275°F (135°C) Meat Probe Lo 140°F (60°C) Hi 210°F (99°C)

Timer 12 Hr. Mode 0:01 Min. 11:59 Hr./Min.

24 Hr. Mode 0:01 Min 11:59 Hr./Min.

Clock Time 12 Hr. Mode 1:00 Hr./Min. 12:59 Hr./Min.

24 Hr. Mode 0:00 Min 23:59 Hr./Min.

Delay Start 12 Hr. Mode 1:00 Hr./Min. 12:59 Hr./Min.

24 Hr. Mode 0:00 Min 23:59 Hr./Min

Bake Time 12 Hr. Mode 0:01 Min 5:59 Hr./Min.

24 Hr. Mode 0:01 Min 5:59 Hr./Min.

Self Clean Time 2 hours 4 hours

The features listed show the minimum and maximum time or temperature settings allowable.

Setting the Clock

The set clock control is used to set the clock. The clock may be set for 12 or 24 hours display operation. The clock is preset at the factory for 12 hour display. When the oven is

first plugged in, or when the power supply to the oven has

been interrupted, the timer in the display will flash.

To set the clock (example below for 1:30):

1. Press set clock. CLO will appear in the display.

2. Press 1 3 0 on the keypad to set the time of day to 1:30. CLO will stay in the display.

3. Press start. CLO will disappear and the clock will start.

Setting 12 or 24 Hour Time of Day Display

1. Press and hold set clock for 6 seconds. CLO will

appear in the display.

2. Continue holding the key until 12Hr dAY or 24Hr dAY appears in the display and the control beeps once.

3. Press self clean to switch between the 12 and 24 hour time of day display. The display will show either 12Hr

dAY or 24Hr dAY.

4. Press start to accept the change or press off to reject

the change.

5. Reset the correct time as described in this section. If the 24 hour time of day mode was chosen, the clock will

display time from 0:00 through 23:59 hours.

Setting Continuous Bake or 6 Hour Energy Saving

The timer on-off and self clean keys control the continuos bake or 6 hour energy saving features. The oven control has a factory preset 6 Hour Energy Saving feature that

shuts off the oven if the oven control is left on for more than 6 hours. The oven can be programmed to override this

feature for Continuous Baking.

To set the control for continuous bake or 6 hour energy saving:

Press and hold timer on-off for 6 seconds. After 6 seconds 6Hr OFF or StAY On will appear in the display

and the control will beep once.

Press self clean to switch between the 6 hour energy saving and continuous bake features.

Press start to accept the change (display will return to time of day) or press off to reject the change.

6Hr OFF indicates the control is set for the 6 hour energy saving mode. StAY On indicates the control is set for the

continuous bake feature.

Temperature Display (Fahrenheit/Celsius)

The broil and self clean keys control the Fahrenheit (°F) or Celsius (°C) temperature display modes. The oven control can be programmed to display temperatures in °F or °C. The oven is preset at the factory to display in °F.

To change display from °F to °C or °C to °F

To tell if the display is set for °F or °C, press broil and hold for 6 seconds. 550 ° will appear, broil will flash in the display, and a beep will sound. If F appears, the display is set to show temperatures in °F. If C appears, the display is set to show temperatures in °C.

Press self clean to switch between °F or °C display modes. The display will show either F or C.

Press start to accept the change or press off to reject the change.

To change control from normal sound operation to silent control operation:

To set oven for normal or silent operation, press and hold delay start. -- -- will appear and DELAY will flash in the display. After 6 seconds bEEP On or bEEP OFF will appear in the display.

. Press self clean to switch between normal sound

operation and silent operation mode. The display will show either bEEP On or bEEP OFF. If bEEP On

appears, the control will operate with normal sounds and beeps. If bEEP OFF appears, the control is in the silent operation mode.

3. Press start to accept the change or press off to reject the change.

and will beep when a set temperature has been reached,

i he control will always beep at the end of a minute timer i

even if the control is set to silent operation.

Setting the Timer The timer on-off key controls the minute timer and serves

as an extra timer and can be used during any of the other oven control functions.

To set the minute timer:

1. Press timer on-off. -- -- will appear and timer will flash

in the display. Press the number keys to set the desired time.

Press start. The time will begin to count down and Timer will stay in the display. When the time expires, End and Timer will show in the display. The clock will beep three times every 30 seconds until timer on-off is pressed.

To cancel the minute timer before the set time expires, press timer on-off.

Setting Control for Silent Operation Delay start and self clean keys control the silent control

operation feature. The silent control operation feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control can be programmed for silent operation and later returned to operating with all the normal sounds and beeps.

If start is not pressed, the timer will return to the time of : day after 25 seconds.The timer does not start or stop the !i cooking process.

Setting Oven Lockout Feature

The _[_ key controls the oven lockout. When active, this

feature automatically locks the oven door, preventing the

oven from being turned on. It does not affect the clock, timer, or the interior oven lights. When the Oven Lockout key is activated, it also locks the cooktop. Dashes will appear on the ESEC displays.

To activate the oven lockout feature:

1. Press and hold _ for 3 seconds.

2. After 3 seconds, door Loc will appear, a tone will

sound,

3. Once locked, DOOR and the lock icon will stop flashing and remain visible with the Loc.

To reactivate normal oven operation:

1. Press and hold I_ for 3 seconds.

2. After 3 seconds, door Loc will appear, a tone will sound, and the word DOOR and the lock icon will flash in the display until the oven door has completely

unlocked.

and the word DOOR and the I_ icon will flash.

Setting Preheat

The powerplus preheat/quick preheat feature is used

when a recipe calls for preheating the oven. When the

preheat stage ends, a tone will sound indicating when to place the food in the oven. Preheat can be programmed for temperatures between 170°F to 550°F and is not necessary

when roasting or cooking casseroles.

For batter and dough-based goods such as cakes, pastries, and breads, use the regular bake or convection function for

best results.

To set the preheat temperature for 350°F:

1. Arrange the interior oven racks.

2. Press powerplus preheat/quick preheat. 350 will

appear in the display. Press start.

3. 350 and PREHEAT will be displayed while the oven is preheating.

4. Press off when baking is complete or to cancel the preheat feature.

3. The oven is now fully operational.

Oven Light

The oven is equipped with two oven lights. The oven lights

will turn on automatically when the oven door is opened.

The oven light may be turned on when the door is closed by using the oven light key on the control panel.

The oven light will not operate during the self clean

function.

To toggle the oven lights on and off:

1. Press _.

2. The interior oven lights are covered with a glass shield. The glass shield must be in place whenever the oven is in use. To change the interior oven lights, see "Replacing the oven light" on page 50.

To change preheat temperature while oven is preheating (ex: changing from 350°F to 425°F):

1. Press powerplus preheat/quick preheat. 350 will

appear in the display.

2. Enter the new preheat temperature. Press 4 2 5.

3. Press start. 425 will show in the display.

4. When baking is complete, press off.

A beep will sound once the oven temperature reaches .....

425°F.

Once the oven reaches the set temperature, the control beeps, the word PREHEAT disappears from the display, and the convection fan stops rotating. The bake feature will display the set oven temperature and will continue cooking at the set bake tempera-

ture. When preheated, place food in the oven. During

preheat, the convection fan is active during the first rise in temperature to allow oven to reach its target temperature faster.The bake, broil, and convection elements will also cycle for a better heat distribution.

Setting Bake

Bake controls normal baking. If a rapid preheating is preferred, refer to "Setting Preheat" on page 26. The oven can be programmed to bake at any temperature from 170°F

to 550°R

To set the bake temperature to 375°F:

Baking Tips For best bake results:

Fully preheat the oven before baking items like cookies, cakes, biscuits, and breads.

When using any single rack, position the rack so that the food is in the center of the oven.

1. Arrange interior oven racks.

2. Press bake. 350 will appear in the display.

3. Press 3 7 5.

Press start. The actual temperature will be displayed. A beep will sound once the oven temperature reaches 375°F, and the display will show 375°.

5. When preheated, place food in oven.

Pressing Off at any time will stop the feature.

To change the bake temperature (example: changing

from 375°F to 425°F):

1. After the oven has already been set to bake at 375°F and the oven temperature needs to be changed to 425°F, press bake and 375 will appear in the display.

2. Press 4 2 5.

3. Press start.

For best results when baking cakes using two oven racks, place racks in positions 2 and 4 (See Figure 21).

When baking using two oven racks, position cookware as shown in Figure 22. Allow at least 2 inches (5 cm) of space between cookware for proper air circulation.

Dark or dull bakeware absorbs more heat than shiny bakeware. It may be necessary to reduce oven temper- ature and cook time to prevent overbrowning of some foods. Dark bakeware is recommended for pies. Shiny

bakeware is recommended for cakes, cookies, and muffins.

• For batter and dough-based baked goods such as cakes, pastries, and breads, use the convection

function for best results.

Figure 21: Rack positions Figure 22: Pan spacing

Setting Broil

This mode is best for meats, fish, and poultry up to 1" thick. Broiling cooks tender cuts of meat by direct heat. The broil key controls the broil feature. An optional searing grill, broiler pan, and insert may be purchased at frigidaire.com. The broil pan and broil pan insert used together allow grease to drain away from the high heat of the oven broiler. The oven can be programmed to broil at any temperature

from 400°F to 550°F with a default temperature of 550°F.

To set a broil of 500°F:

Place the broiler pan insert on the broiler pan and place the food on the broiler pan insert. Do not use the broiler pan without the insert.The exposed grease could ignite.

Arrange the interior oven rack and place the broiler pan on the rack. Center the broiler pan directly under the broiler element. Preheat for 5 minutes before broiling.

Press broil. 550 will appear in the display.

Table 4:

Broiling recommendations

Press 5 0 0. If a lower broil temperature is desired (minimum broil temperature setting is 400°F), press the desired temperature before continuing to Step 5.

Press start. The oven will begin to broil. 500 ° will appear in the display.

Broil on one side until food is browned; turn and cook on the second side. Season and serve. Always pull the rack out to the stop position before turning or removing

food.

7. To stop broiling, press off.

Broiling tips:

• For optimum browning, preheat the broil element for 5 minutes. Broil one side until the food is browned; turn and cook on the second side. Season and serve.

• If using a searing grill (available by mail order), preheat oven 5 to 10 minutes before grilling.

Cook time

Food item Rack Position Temperature 1st side Doneness

Steak 1" thick 3rd or 4th 550°F 6:00 Rare

3rd or 4th 550°F 7:00 Medium

2nd side

4:00 5:00

Pork Chops 314"thick 3rd or 4th 550°F 8:00 Well Chicken - Bone In 3rd 450°F 20:00 Well

Chicken - Boneless 3rd or 4th 450°F 8:00 Well

6:00

10:00

6:00

Fish 3rd 500°F 13:00 Well Shrimp 3rd 550°F 5:00 Well

Hamburger 1" thick 3rd or 4th 550°F 9:00 7:00 Medium

Broiler Inse_

Broiler Broiler Pan

Pan & Insert

Figure 23:

Broil accessories

Convection Cooking

Convection cooking uses the three elements and a fan to circulate the heat evenly and continuously within the oven (See Figure 24).

Benefits of convection cooking:

• Multiple rack baking.

• Some foods cook faster, saving time and energy.

• No special pans or bakeware needed.

• Food cooks more evenly.

Convection baking tips:

• Fully preheat the oven before baking items like cookies, cakes, biscuits, and breads.

If your recipe cooking temperature has already been converted for convection baking, there is no need to reduce your oven temperature. If not, you can easily reduce using the Convection Convert feature. Please see "Setting Convection Convert" on page 30 for further instruction on temperature conversion.

• When using any single rack, position the rack so that the food is in the center of the oven.

For best results when baking cakes using two oven racks, place racks in positions 2 and 4 (See Figure 25).

When baking using two oven racks, position cookware as shown in Figure 26. Allow at least 2 inches (5 cm) of space between cookware for proper air circulation.

bakeware is recommended for cakes, cookies, and muffins.

Figure 24: Air circulation in convection function Setting Convection Bake

This mode of cooking enables you to obtain the best results

when baking with multiple pans and racks. The oven can be

programmed for convection baking at any temperature between 170°F to 550°F with a default temperature of

350°F.

To set the oven for convection bake and temperature to 375°F:

Arrange interior oven racks.

Press convect. Convect and bake will flash and 350

will appear in the display. If a convection bake of 350°F

is needed, press start.

Press 3 7 5. Convect and bake will keep flashing, and 375° will appear in the display.

Press start. The actual oven temperature and the fan icon will be displayed. A beep will sound once the oven temperature reaches 375°F, and the display will show

375 °, CONVECT, BAKE, and the fan icon.

5. Place food in oven.

• Most baked goods (except cakes) should be baked on pans with no sides or low sides to allow air to circulate

Figure 25: Rack positions Figure 26: Pan spacing

The convection fan will start as soon as the oven is set for convection bake. The display will show an icon of rotating

fan within a square, indicating the convection fan is oper- _ ating. The bake, broil, and convection elements will also

cycle for a better heat distribution. Pressing off will stop the feature at any time.

Setting Convection Convert

Setting Convection Broil

Convection convert automatically converts a standard baking recipe for convection baking. When set properly, this

feature is designed to display the actual converted

(reduced) temperature in the display. Convection convert may only be used with a convection bake cooking mode. It can be used with a delay start and bake time. For delay start instructions, see "Setting Delay Start" on page 32. For bake time instructions, see "Setting Bake Time" on page 32.

If convection conversion is used with the bake time and delay start features, CF (check food) will be displayed when

75% of the bake time complete. At this time the oven control will sound three long beeps at regular intervals until baking time is finished. The control will display End and continue to beep at regular intervals until off is pressed.

To set the oven for convection bake with a standard baking recipe temperature of 400°F:

Arrange interior oven racks.

Press convect. Convect and bake will flash and 350

will appear in the display.

Pres 4 0 0. Convect and bake will keep flashing and 400° will appear in the display.

4. Press start.

Set bake time or delay start if needed. For delay start instructions, see "Setting Delay Start" on page 32. For bake time instructions, see "Setting Bake Time" on page 32.

Press convect convert, and the oven will start heating. The temperature displayed will be 25°F lower than what it used to be. The actual oven temperature and the fan icon will be displayed. A beep will sound once the oven temperature reaches 375°F, and the display will show 375 °, CONVECT, BAKE, and the fan icon.

7. Place food in the oven.

Use this mode for thicker cuts of meat, fish, and poultry. The convection broiling gently browns the exterior and seals in

the juices. Convection broiling uses the broil element and a fan to circulate the oven's heat evenly and continuously within the oven. The oven can be programmed for convec-

tion and normal broiling at any temperature between 400°F

to 550°F with a default temperature of 550°F (See Table 4).

To set a convection broil temperature of 500°F:

1. Arrange oven racks first. Press convect; 350 will be displayed, and convect and bake will flash.

2. Press convect two more times; 550 will be displayed and convect and broil will flash.

3. Press 5 0 0.

4. Press start.

5. 500, CONVECT, BROIL, and the fan icon will be

displayed.

6. After 5 minutes of preheat, place food in the oven.

Convection broiling tips:

• For optimum browning, preheat the broil element for 5 minutes. Always pull the rack out to the stop position before turning or removing food.

• Always use a broiler pan and its insert when broiling (available by mail order). It keeps grease away from the high heat of the broil element.

Do not use the broil pan without the insert. Do not cover the broil pan insert with foil. The exposed grease could catch fire. If using a searing grill (available by mail order), preheat the grill for 5 to 10 minutes before placing your meat. Broil one side until the food is

browned; turn and cook on the second side. Season and serve.

When using a bake time under 20 minutes, the convec- tion convert will not beep and display the CF message.

Pressing off will stop the feature at any time. Bake, broil, and convection elements will cycle for better

heat distribution and faster and more even cooking.

• Convection broiling is generally faster than conventional broiling. Check for doneness at the minimum recom-

mended time.

Setting Convection Roast

This mode is best for cooking tender cuts of beef, lamb, pork, and poultry. Use this mode when cooking speed is desired. Convection roasting gently browns the exterior and seals in the juices. Convection roasting uses the bake element, convection element, broil element, and fan to circulate the heat evenly and continuously within the oven. The oven can be programmed for convection roasting at any temperature between 170°F to 550°F with a default temperature of 350°F.

To set a convection roast temperature of 375°F:

Should an oven fire occur, close oven door and turn off the oven. If the fire continues, throw baking soda on the

fire or use a fire extinguisher. Do not put water or flour on

the fire. Flour may be explosive, and water can cause a grease fire to spread and cause personal injury.

1. Arrange oven racks and place food in the oven.

2. Press convect; 350 will be displayed; Convect and bake will flash.

Some models have a dual convection fan, which could reduce overall cooking times.

3. Press convect again. 350 will be displayed, and convect and roast will flash.

Enter the desired roasting temperature using the number keys, i.e.: 3 7 5.

Press start; The actual oven temperature will be displayed. Convect, roast, and the fan icon will be displayed. The bake, broil, and convection elements will also cycle for a better heat distribution.

Convection roasting tips:

Use a broiler pan and insert, as well as a roasting rack (available by mail order). The broiler pan will catch grease drippings, and the grid will help prevent spatters. The roasting rack will hold the meat.

• It's not recommended to roast chicken on a roasting rack. Use a deep pan instead.

• Place an oven rack on rack position 1 (offset rack).

• No preheat is needed in convection roast.

• Make sure the roasting rack is securely seated on the grid in the broiler pan. Do not use the broiler pan without

the insert or cover the insert with aluminum foil.

• Pull the rack out to the stop position before removing

food. Position food (fat side up) on the roasting rack.

Setting Bake Time

Use bake time when setting the oven to cook for a specific length of time and shut off automatically when the time is complete.

When cooking time ends, the oven will shut off and will beep. This feature can be used with bake, convection bake, convection roast, and slow cook modes.

To program the oven to begin baking immediately and to shut off automatically (example: Bake at 350°F for 30 minutes):

1. Be sure the clock is set for the correct time of day.

2. Arrange interior oven rack(s) and place the food in then

oven.

3. Press bake. 350 will appear in the display.

4. Press start. The actual oven temperature will appear in

the display.

5. Press bake time. -- -- will appear in the display.

6. Enter the desired baking time by pressing 3 0.

7. Press start. Once the timed bake feature has started, the current time of day will appear in the display.

Press off when baking has finished or at any time to cancel the bake time feature. A bake time of 0 minute can also be

entered to cancel the bake time feature and keep the oven in its current cooking mode. When the timed bake finishes:

1. End and the time of day will show in display. The oven

will shut off automatically.

2. The control will beep three times. The control will continue to beep three times every 30 seconds until off is pressed.

Setting Delay Start

Food Poisoning Hazard. Do not let food sit for more than one hour before or after cooking. Doing so can result in food poisoning or sickness. Foods that can easily spoil : such as milk, eggs, fish, meat, or poultry should be chilled !

in the refrigerator first. Even when chilled, they should not stand in the oven for more than 1 hour before cooking

begins and should be removed promptly when finished i! cooking.

Bake, convect, bake time, and delay start keys control the delayed start feature. The automatic timer of delayed start will turn the oven on and off at the time you select in

advance.

To program the oven for a delayed start time with the bake function. (example: baking at 375°F for 30 minutes, starting at 5:30):

1. Be sure that the clock is set with the correct time of day.

2. Arrange interior oven rack and place the food in the oven.

3. Press bake. 350 will appear in the display.

4. Enter the desired temperature, i.e.: press 3 7 5.

5. Press start. The actual oven temperature will appear in

the display.

6. Press bake time and enter 3 0 using numeric keys.

7. Press start.

8. Press delay start.

9. Enter the desired start time; pressing 5 3 0.

10. Press start.

Baking time can be set for any amount of time between 1 minute to 5 hrs and 59 minutes. The time remaining can be shown in the timer section of the display by pressing bake time at any moment of the cooking.

Once bake time has started baking, a beep will sound

when the oven temperature reaches the set temperature.

When a delayed baking function starts, the set oven temperature will appear. Belay, bake, and the current time of day will appear in the display. When the desired start time is reached, the actual oven temperature appears in display and delay disappears. Oven starts to bake at the previously selected temperature

Setting Warm

Setting My Favorites Recipe (some models)

Warm is best for keeping oven baked foods warm for serving after cooking has finished. The warm key turns on the warm feature, will maintain an oven temperature of 170°F (77°C), and will keep oven baked foods warm for serving up to 3 hours after cooking.

After 3 hours, the warm feature will shut the oven off. The

warm feature may be used without any other cooking oper-

ations or can be set to turn on automatically after a bake time or delay start.

Warm tips:

• Always start with hot food. Do not use the warm feature to heat cold food.

Food in heat-safe glass and glass ceramic containers may need higher temperature settings compared to

food in regular containers.

Avoid repeated openings of the oven, it will allow hot air 4. to escape and the food to cool. 5.

Aluminum foil may be used to cover food to increase moisture content.

To set warm:

1. Arrange interior oven racks and place food in oven.

2. Press warm. "HLd" will appear in the display.

3. Press start. If start is not touched within 25 seconds the request to turn on the warm feature will be

canceled.

4. To turn off the warm feature at any time, press off.

To set warm to turn on automatically:

Arrange interior oven racks and place food in oven. Set the oven properly for bake time or delay start. For delay start instructions, see "Setting Delay Start" on page 32. For bake time instructions, see "Setting Bake Time" on page 32.

2. Press warm. If no key is touched within 25 seconds, the request to turn on the warm feature will be cancelled.

3. Press start. HLd will disappear and the temperature will be displayed. The warm mode is set to turn on automat- ically after timed bake has finished.

4. To turn the warm feature off at any time, press off.

The my favorites key allows the user to save a recipe to be recalled at any time. The recipe may be for any baking temperature between 170°F (77°C) and 550°F (288°C). Once saved, the user needs only to select the my favorites key, and the baking function will start automatically with the pre-programmed recipe. The oven can recall a cooking sequences from its internal memory, which is easily acces- sible from a one touch key. This function can be used with bake, convection bake, convection roast, and preheat.

To save a favorite (example: 450°F bake for 30 minutes):

1. Press bake. The default temperature will appear in the

display.

2. Enter temperature needed, i.e.: 4 5 0. Press start.

3. Press bake time.

Enter time needed, i.e.: 3 0. Press start. Press and hold for 3 seconds my favorites key. The v

icon will be shown to confirm your setting has been saved.

6. The bake recipe will start. If you do not need it at this time, press off.

To recall a favorite:

1. Press my favorites.

2. Press start.

Recalling a my favorites recipe can only be done when

To overwrite a favorite: To overwrite my favorites, simply start a new cooking

sequence and save it as shown in example above. The new my favorites settings will overwrite the old ones.

To delete a favorite: Press my favorites for 3 seconds to delete while the oven

is not in operation and no cooking mode has been set. The heart icon will turn off, indicating that the recipe has been

deleted.

Cooking with Meat Probe

Do not use kitchen utensils to pull on the probe cable or handles. Always insert and remove the probe using the provided handles, as shown in Figure 27, and always use

a pot holder to protect hands from possible burns.

Use the probe feature for best results when cooking foods such as roasts, hams or poultry.

For meats like poultry and roasts, using a probe to check internal temperature is the safest method to ensure properly

cooked food. The probe feature, when set correctly, will signal an alert

when the internal food temperature reaches the desired set

target temperature. When active, the probe displays the internal food tempera-

ture which is visible in the display during the cooking process. This eliminates any guesswork or the need to open the oven door to check the thermometer.

Do not store the probe inside the oven. Use only the original probe provided. Connecting any other probe or device could result in damage to the oven control, electronics, and the receptacle.

Before starting self clean, double check that the probe is removed from the oven interior. Defrost frozen

Proper placement of probe in food.

Insert the probe so that the probe tip rests inside the center of the thickest part of meat or food (See Figure 28). For best results, do not allow the probe temperature sensor to contact bone, fat, gristle, or the

cookware.

Insert:

probe tip

to center of

food

receptacle connector handle

probe

_robe

sensor

Figure 27: Using the probe

On some models, the meat probe receptacle may be located in the top of the oven cavity, toward the front.

Figure 28: Probe in thickest area of food

• For bone-in ham or lamb, insert the probe into the center of lowest large muscle or joint.

• For meat loaf or casseroles, insert the probe into center of food.

When cooking fish, insert meat probe just above the gill. For whole poultry or turkey, fully insert the probe sensor

into the thickest part of inner thigh, just below the leg (See Figure 29).

Figure 29: Probe in thickest part of thigh

To set probe:

1. Insert the probe into the food. Place prepared food on the desired oven rack position and slide into the oven.

Plug the connector end of the probe all the way into the probe receptacle while the oven is still cool. The recep- tacle is located on the upper left front oven cavity wall (See Figure 27).

When the probe is set, an acceptance tone will sound, the probe icon will illuminate, and the actual probe temperature appears in the display (See Figure 30).

Close the oven door

Figure 30:

Press probe key once. Enter the desired target food

Probe set showing probe temperature

temperature using the numeric keys, and set tempera- ture for food type. The minimum setting is 140°F (60°C); the maximum is 210°F (99°C). Default is 170°F (77°C).

Press start to accept the target temperature.

Set for quick preheat, bake, convect bake, convect roast, or convect convert, and if necessary adjust the oven temperature accordingly.

The control will provide three beeps when the internal target temperature is reached. The oven will automati- cally change to a warm setting (HLd), and the actual probe temperature will alternate in the display. Warm

will maintain the oven temperature at 170°F (77°C) for 3

hours unless otherwise cancelled.

To set the oven to continue cooking after reaching the target temperature:

1. Press probe key and hold for 6 seconds.

2. Press self clean key and toggle until Continu:

appears, as shown in Figure 31, then press start to accept.

Figure 31: Probe set to continue cooking To set the oven to automatically stop cooking and start

warm once reaching target temperature:

1. Press probe key and hold for 6 seconds.

2. Press the self clean key and toggle until CANCEL appears, as shown in Figure 32, then press start to accept

Figure 32: Probe set to cancel cooking Probe too hot message:

When the message Prob... Too... Hot... flashes in the display, the probe temperature has exceeded 250°F (121°C). If the probe is not removed, this message may continue until the sensor reaches 300°F (149°C) or higher, and oven will automatically turn off. Be sure the probe sensor is fully covered by the food.

To stop cooking at any time, press off.

To set how the oven will operate once the probe reaches the target temperature:

The oven is preset to automatically stop cooking and start the warm feature when probe sensor reaches the target temperature. This may be set to continue cooking if desired. Setting the options once the probe reaches the target temperature must be done when the oven is inactive. The probe is not required to be connected to the probe recep- tacle when setting this option.

During cooking the internal food temperature will display by default. To see the target temperature press the probe key once. After 6 seconds the display will revert to the internal food temperature. To assure accuracy, do not remove the probe from the food or receptacle until the desired internal temperature is reached.

If the probe is removed from the receptacle only, the probe feature will cancel but the oven will continue to cook. If the probe is removed from the food only, the probe feature will remain active and may eventually generate a probe too hot message.

To change the target temperature while cooking, press the probe key once. Use the numeric keys to change the temperature. Press the start key to accept any change.

iiiii

Table 5:

USDA recommended minimum internal cooking temperatures

Food Type

Internal Temp.

Ground meat and meat mixtures

Beef, Pork, Veal, Lamb Turkey, Chicken

160°F (71°C) 165°F (74°C)

Fresh beef, veal, lamb

Medium rare + Medium Well Done

145°F (63°C) 160°F (71°C) 170°F (77°C)

Poultry

Chicken and Turkey, whole

165°F (74°C) Poultry Breasts, Roasts 165°F (74°C) Poultry Thighs, Wings 165°F (74°C) Duck and Goose 165°F (74°C) Stuffing (cooked alone or in bird) 165°F (74°C)

Fresh Pork 160°F (71°C) Ham

Fresh (raw) 160°F (71°C) Pre-cooked (to reheat) 140°F (60°C Eggs and egg dishes Eggs Cook until yolk and

white are firm

Eggs dishes 160°F (71°C) Leftovers and Casseroles 165°F (74°C)

The U.S. Department of Agriculture states, "Rare fresh beef is pop-

ular, but you should know that cooking it to only 140°F (6O°C) means some food poisoning organisms may sur- vive." (Source: Safe Food Book, Your Kitchen Guide, USDA Rev. June 1985.)

Visit the USDA Food Safety and Inspection website at

www.fsis.usda.gov

Setting Slow Cook (some models) The slow cook feature is best for cooking at lower tempera-

tures for longer periods of time and works best for beef (ribs and brisket), pork roasts, and poultry dishes.

Slow cook has two settings: Lo 225°F (108°C) and Hi 275°F (135°C). Both settings can be used with the following options:

• Bake time

• Bake time with delay start Slow cook tips:

• Slow cooking meats may result in the outside of the meat turning dark; this is normal.

• Completely thaw all frozen foods before cooking

• When using a single oven rack, place in oven rack so food is centered in oven.

• Position multiple racks to accommodate size of cooking utensils when cooking multiple food items.

• Add any cream or cheese sauces during the last hour of cooking.

• Do not frequently open the oven door or leave the oven door open when checking food items. The more heat that is lost, the longer the food will need to cook.

• Cover foods to keep them moist or use a loose or vented cover to allow foods to turn crisp or brown.

• Roasts may be left uncovered so browning can occur. Cook times will vary depending on the weight, fat content, bone, and the shape of the roast.

• Preheating the oven is not necessary.

To set slow cook:

1. Position oven racks and cookware in oven. Close the oven door.

Press slow cook (some models). HI will appear in the oven display indicating the default setting is for high heat. If a low setting is needed, press slow cook again to select the LO setting and release.

Press start.

To stop cooking at any time, press off.

Slow cook can be changed between Hi and Lo settings by pressing slow cook to toggle between the two settings. Press start to activate the new setting.

Restoring Factory Default Setting

Your appliance is programmed with default control settings. Over time, users may make changes to these settings. The

following options have settings that can be modified and

may have been changed since the appliance was new:

• 12or 24 hour display mode

• Continuous bake or 6 hour energy savings mode

• Silent or audible control

• Oven temperature display (°F or °C)

3. Press start to accept the temperature change and the display will return to the time of day. Press off to reject the change if necessary.

To adjust the oven temperature lower:

1. Press bake for 6 seconds. UPO 0 will appear in the

display.

To decrease the temperature, use the number keys to enter the desired change (Example -30°F) 3 0. Then, press self clean. The temperature may be decreased as much as 35°F (19°C).

• Oven temperature adjustments (offsets)

• Stored recipes

• Cancel/continue cooking with meat probe option.

If you choose to restore factory default settings, all of the above user preferences will be restored to their original settings (factory default). The oven temperature offset will !: reset, and any stored recipes will be cleared.

To restore oven control to factory default settings:

1. When the oven is in idle and no cooking function is in operation, press and hold the 7 key until the acceptance tone sounds (about 6 seconds)

2. Press start. The control is now reset to default settings.

Adjusting Oven Temperature

The temperature in the oven is pre-set at the factory. When

first using the oven, be sure to follow recipe times and

temperatures. If you think the oven is cooking too hot or too cool for the temperature you select, you can adjust the actual oven temperature to be more or less than what is displayed. Before adjusting, test a recipe by using a temperature setting higher or lower than the recommended temperature. The baking results should help you to decide how much of an adjustment is needed.

To adjust the oven temperature higher:

Press bake for 6 seconds. UPO 0 will appear in the display.

To increase the temperature, use the number keys to enter the desired change. For example, for 30°F, press 3 0. The temperature may be increased as much as 35°F (19°C).

3. Press start to accept the temperature change and the display will return to the time of day. Press off to reject the change if necessary.

The oven temperature adjustments made with this feature ;: will not change the self clean cycle temperature or the broil temperature.

The oven temperature adjustments are permanent and will stay in the unit memory unless you manually change it again or if all the controls are reset. Even a power outage will not reset these changes. Follow the same procedure again if you wish to change it to a different setting or use the "Restoring Factory Default Setting" instructions on this page to restore settings to their

defaults.

Setting the Sabbath Feature (For use on the Jewish Sabbath and Holidays)

The bake time and start keys are

used to set the Sabbath feature. For further assistance, guidelines for

proper usage, and a complete list of models with the Sabbath feature, please visit the web at http:\\www.star- k.org.

The Sabbath feature may only be used with the bake

function. Once the oven is properly set using bake with the

Sabbath feature active, the oven will remain on until cancelled. The Sabbath feature overrides the factory preset

12 hour energy saving feature. If the oven light is needed during the Sabbath, press Oven

light before activating the Sabbath feature. Once the oven light is turned on and the Sabbath feature is active, the oven light will remain on until the Sabbath feature is turned off. If the oven light needs to be off, be sure to turn the oven light off before activating the Sabbath feature.

It is advised to not activate any cooking function other than bake while the Sabbath feature is active.

To program the oven to begin baking immediately and activate the Sabbath feature (example: baking at 350°F):

Be sure that the clock is set with the correct time of day.

Place the food in the oven. Press bake. 350 ° appears in the display. Press start. The actual oven temperature appears in the display.

If you desire to set the oven control for a bake time or delayed bake time, do so at this time. If not, skip this step and continue to Step 5. For delay start instructions, see "Setting Delay Start" on page 32. For bake time instructions, see "Setting Bake Time" on page 32. Remember the oven will turn off after using bake time or delay start and may only be used once during the Sabbath/Jewish holidays. The maximum bake time is 5

hours and 59 minutes.

The oven will turn on and begin heating.

Press and hold both the bake time and delay start keys for at least 3 seconds. SAb will appear in the display. Once SAb appears in the display, the oven

control will no longer beep or display any further changes, and the oven is properly set for the Sabbath

feature.

The oven may be turned off at any time by first pressing off (this will turn the oven off only).

To turn off the Sabbath feature, press and hold both the bake time and delay start keys for at least 3 seconds. SAb will disappear from the display.

You may change the oven temperature once baking has started by pressing bake and the numeric keys for the new temperature. For example, to change from 350°F to 425°F, press 4 2 5. Then, press start

twice.

• Only the following controls will function after setting the Sabbath feature: numeric keypad, bake, start, and

off. All other features will not function once the Sabbath feature is properly activated.

• The display will not show temperature changes or i sound any audible tones when the oven is set with the

Sabbath feature

Cooktop Sabbath Day Feature and (Sb) Message

Power failure while using Sabbath feature: Should you experience a power failure or interruption, the

oven will shut off. When power is returned, SF (Sabbath Failure) will be displayed, and the oven will not turn back on automatically. If your food was nearly fully cooked, you may allow the trapped heat in the oven to finish the cooking process. Otherwise, you should remove the food when the power failure occurs because you may only start the oven once during the Sabbath/Jewish holidays.

After the Sabbath observance turn off the Sabbath feature. Press and hold both the bake time and delay start keys for

at least 3 seconds. SAb will disappear from the display, and the oven may be used with all normal functions.

Warmer Drawer (some models)

Warm & Ready TMDrawer

The purpose of the warmer drawer is to keep hot cooked

foods at serving temperatures. Examples are vegetables,

gravies, meats, casseroles, biscuits, rolls, and pastries. It is not recommended to heat cold food in the warmer drawer; always start with hot food.

The warmer drawer may also be used to warm dinner plates. All food placed in the warmer drawer should be covered with a lid or aluminum foil to maintain quality.

Do not use plastic wrap to cover food. Plastic may melt onto the drawer and be very difficult to clean up. Use only utensils and cookware recommended by the manufac-

turer for use in the keep warm drawer.

Arranging Warmer Drawer Rack Positions

The keep warmer drawer rack may be used in two ways:

In the upright position (Figure 33) to allow low profile food items to be placed both under and on top of the rack (for example, rolls or biscuits on top of the rack and a casserole dish underneath).

Figure 33: Upright position

In the downward position (Figure 34) to allow for light

weight food items and empty cookware (for example, rolls,

pastries, and dinner plates) on the rack.

Storage In or On Appliance--Flammable materials should not be stored in an oven, near surface units or in the storage drawer, warmer drawer or lower oven. This includes paper, plastic, and cloth items, such as cook- books, plastic ware, and towels, as well as flammable liquids. Do not store explosives, such as aerosol cans, on or near the range.

Do Not Leave Children Alone - Children should not be left alone or unattended in the area where appliance is in use. They should never be allowed to sit or stand on any

part of the appliance, including the storage drawer, lower broiler drawer, warmer drawer, or lower double oven.

Always use potholders or oven mitts when removing food from the warmer drawer as cookware and plates will be

hot and you can be burned.

Figure 34: Downward position

Warmer Drawer Indicator Light

The control and indicator lights for the keep warm drawer

features are located on the control panel. The temperatures

are approximate, and are designated by HI (high), MED (medium) and LO (low).

Setting Warmer Drawer (Professional Model)

Food Poisoning Hazard. Do not let food sit for more than one hour before or after cooking. Doing so can result in

food poisoning or sickness. Foods that can easily spoil

such as milk, eggs, fish, meat, or poultry should be chilled in the refrigerator first. Even when chilled, they should not stand in the oven for more than 1 hour before cooking begins and should be removed promptly when finished cooking.

Always use potholders or oven mitts when removing food from the warmer drawer as cookware and plates will be

hot and you can be burned.

1. Touch the oneoff key at the warmer drawer control position. The warmer drawer indicator light will turn on.

Always start with hot food when using the warmer drawer. Do not heat cold food in the warmer drawer.

Self Clean can not be set when the warmer drawer is active. The warmer drawer is inoperable during the

self-clean cycle.

• The warmer drawer is equipped with a catch that may require extra force to open and close the drawer.

Keep warm drawer temperature selection Recommended keep warm drawer settings are shown in

Table 6. If a particular food is not listed, start with the MED setting. If more crispness is desired, remove the lid or aluminum foil from the food. Most foods can be kept at serving temperatures on the MED setting. When a combi- nation of foods are to be kept warm (for instance, meat with 2 vegetables and rolls), use the HI setting. To avoid heat loss, do not open the keep warm drawer while in use.

Table 6:

Warmer drawer recommended food settings

If no further keys are touched within 25 seconds, the request to power the warmer drawer on will clear.

2. Press the temp key until the desired temperature setting is displayed.

For best results, preheat the warmer drawer before adding the food. An empty drawer will preheat in approxi- mately 15 minutes.

3. When the food is ready for removal, touch the oneoff key once to turn the warmer drawer off. The warmer drawer indicator light will turn off.

Food Type Setting

Bacon, Hamburger Patties Poultry, Pork Chops

Fried Foods, Pizza

Gravies, Casseroles Vegetables, Eggs

Roasts (Beef, Pork, Lamb) Biscuits

Rolls, hard Rolls (soft)

Empty Dinner Plates

HI HI

HI MED MED MED MED MED

LO LO

Removingand Replacing the Warmer Drawer

To remove the warmer drawer:

Electrical shock hazard can occur and result in serious injury or death. Disconnect appliance from electric power

before cleaning and servicing the warmer drawer. Turn the keep warm drawer control knob to OFF before

removing the drawer. DO NOT touch the keep warm drawer element. The element may still be hot enough to cause burns, even if it is dark in color.

1. Open the drawer to the fully opened position.

2. Locate the latches on both sides of the keep warm drawer.

Pull up on the left glide latch and push down on the right glide latch.

4. Pull the drawer away from the appliance.

To replace keep warm drawer:

1. Align the glide latches on both sides of the drawer with the slots on the drawer.

2. Push the drawer back into the appliance.

Left Glide

Push down latch

with finger Right Glide

Pull up latch with finger

Figure 35: Removal procedures

Steam Clean

The steam clean feature offers a chemical-free and time- saving method to assist in the routine cleaning of your oven.

Steam clean may be used before manually cleaning the oven to help loosen soils on the oven bottom.

Do not add ammonia, oven cleaners, or any other household cleaners or chemicals to the water used in the

steam clean cycle. Before manually cleaning any part of the oven, be sure all

controls are turned off and the oven is cool. The oven may be hot and can cause burns.

To set a steam clean cycle:

Oven should be at room temperature. If the oven tem- perature is above the room temperature, steam clean

will not start. Be sure the oven is cool. Remove all racks

and oven accessories.

2. Scrape or wipe loose debris from the oven bottom.

3. Pour 8 oz (235 ml) distilled or filtered water onto the oven bottom (See Figure 36). Close the oven door.

Steam clean is a 20 minute cycle. Time remaining is shown in the display.

An alert will sound at the end of the cycle, and the End message will show in the display. Press off to return to

the clock.

When the steam clean cycle is complete, stand to the side of the oven out of the way of escaping vapor when opening the oven door. The cycle includes a cool-down period, so you may immediately use a soft cloth or sponge to remove any remaining water.

Wipe oven cavity and bottom. Do not clean oven door gasket (See Figure 38).

Figure 36: Add 8 ounces of distilled water

4. Press steam clean. StCn will show in the display (See

Figure 37).

Figure 37: Steam clean selected

5. Press start.

Figure 38: Clean around the oven door gasket

For best results, clean oven immediately after the cycle is complete. Steam clean works best for soils on the oven bottom. Removal of especially stubborn or baked-on soils may require a manual cleaning.

Some condensation or water vapor may appear close to the oven vent. This is normal. The oven gasket may become damp; do not wipe dry. Open door to broil position and allow to air dry.

Local water sources often contain minerals (hard water) and will leave deposits on the oven cavity. If this occurs,

wipe cavity with vinegar or lemon juice. Use distilled or filtered water.

If the door is opened during the steam clean cycle, a beep

will sound and d-O will show in the display. Close the oven

door. Keep oven door closed during steam clean cycle. Steam clean cannot be programmed with a delay start. If

steam clean results are not satisfactory, run a self clean. See "Self-Cleaning Operation" on page 43.

Self-Cleaning Operation

Do not line the oven walls, racks, bottom, or any other part of the oven with aluminum foil. Doing so will block heat distribution, produce poor baking results, and cause permanent damage to the oven interior (aluminum foil will melt to the interior surface of the oven).

The health of some birds is extremely sensitive to the

fumes given off during the self-cleaning cycle of any

oven. Move birds to another well-ventilated room.

• During the self-cleaning cycle, the outside of the oven can become very hot to the touch. Do not leave small children unattended near the appliance.

• Do not force the oven door open. This can damage the automatic door locking system.

• Use caution when opening the door after the self- cleaning cycle is completed. The oven may still be very hot. Stand to the side of the oven door when opening the door to allow hot air or steam to escape.

A self-cleaning oven cleans itself with high temperatures (well above normal cooking temperatures) which eliminate soils completely or reduces them to a fine powdered ash you can wipe away with a damp cloth

What to expect during self-cleaning

While in self-clean mode, the oven heats to temperatures much higher than those used in normal cooking. Sounds of metal expansion and contraction are normal.

Odors are normal as the food soil is being removed. Smoke may appear through the oven vent.

If heavy spills are not wiped up before cleaning, they may

flame and cause more smoke and odor than usual. This is

normal and safe and should not cause alarm. If available, use an exhaust fan during the self-cleaning cycle.

Adhere to the following cleaning precautions:

Do not use oven cleaners or protective coatings in or around any part of the oven interior. Do not clean the oven door gasket. Take care not to rub, damage, or remove the gasket or use any cleaning substances on the oven door gasket (See Figure 39). Doing so could cause damage and reduce the efficiency of the oven's performance.

Clean any soil from the oven frame, door liner outside the oven door gasket, and the small area at the front center of the oven bottom with soap and water (See

Figure 39). These areas heat sufficiently to burn soil

on.

Remove any excessive spills from the oven cavity before starting the self-cleaning cycle. To clean, use hot, soapy water and a cloth. Large spills can cause heavy smoke or fire when subjected to high tempera- tures. Do not allow food spills with a high sugar or acid content (such as milk, tomatoes, sauerkraut, fruit

juices, or pie filling) to remain on the surface as they

may leave a dull spot even after cleaning. Do not use aluminum foil or liners in the oven. These

items are not made to withstand the very high temper- atures of a self-clean cycle and will melt.

Remove all oven racks and accessories. If oven racks are not removed before a self-clean, they will lose

their special coating and will no longer slide in and out of the oven cavity effortlessly.

Oven racks accidentally left in the oven during self clean may be wiped down after cooling with a high- temperature cooking oil to lubricate them.

Figure 39: Clean around the oven door gasket

Setting Self-Clean Cycle Duration

The self clean key controls the self-cleaning feature. If you are planning to use the oven directly after a self-clean cycle

remember to allow time for the oven to cool down and the oven door to unlock. This normally takes about one hour. A

3 hour self-clean cycle will actually take about 4 hours to complete.

It is recommended to use a 2 hour self-clean cycle for light soils, a 3 hour cycle for average soils, and a 4 hour cycle for heavy soils.

To set the controls for a 3 hour self-cleaning cycle to start immediately and shut off automatically:

1. Be sure the clock is set with the correct time of day and the oven door is closed.

Press self clean. CLn and 3:00 HR will show in the display. The control will automatically clean for a 3 hour

period (default self-cleaning cycle time). If a 2 or 4 hour clean time is desired, press self clean multiple times to toggle between 2, 3, or 4 hours.

Press start, door Loc will appear, a beep will sound, and the word DOOR and the 1_ icon will flash; CLn will

remain on in the display.

As soon as the control is set, the motor driven oven door lock will begin to close automatically. Once the

door is locked, the DOOR indicator light and I_1 icon

will stop flashing and remain on, and the oven icon will

appear in the display. Allow about 15 seconds for the oven door to lock completely.

When the self-clean cycle is completed:

NOT will appear in the display. The time of day, the

word DOOR, and the I_1 icon will remain in the display.

Once the oven has cooled for approximately 1 hour, door OPn will appear, and the word DOOR and the lock

icon will flash until the door unlocks. The door can be opened, and the display will show the time of day.

To stop or Interrupt a self-cleaning cycle: If it becomes necessary to stop or interrupt a self-cleaning

cycle due to excessive smoke or fire in the oven:

1. Press off.

The oven door can only be opened after the oven has cooled down for about 1HOUR. door OPn will appear, and the word DOOR and the I_ icon will flash until the door is unlocked. The oven door can then be opened, and the timer will revert back to the time of day.

The self clean and delay start keys control the delayed self-clean operation. The automatic timer will turn the oven on and off at the time you select in advance.

To set the control for the self-cleaning cycle to start at a delayed time and shut off automatically (example: 3 hour self-clean cycle to start at 4:30):

1. Be sure the clock is set with the correct time of day and the oven door is closed.

Press self clean. CLn and 3:00 HR will show in the display. The control will automatically clean for a 3 hour

period. If a 2 or 4 hour clean time is desired, press self clean multiple times to toggle between 2, 3, or 4 hours.

Press start, door Loc will appear, a beep will sound, and the word DOOR and the /_ lock icon will flash. The

letters CLn will remain on in t_ display.

As soon as the control is set, the motor driven oven door lock will begin to close automatically. Once the

door has been locked, the word DOOR and the _ lock icon indicator light will quit flashing and remain on.

5. Press delay start. Enter the desired start time using the number keys 4 3 0.

6. Press start. DELAY, DOOR, and the I_ icons will remain on.

The control will start the self-cleaning at the set start time for the period of time previously selected. At that time, the icon DELAY will go out; CLn and oven icon will appear in the display.

When the self-clean cycle is completed:

HOT will appear in the display. The time of day, the word DOOR, and the lock icon will remain in the display.

When oven cools approximately 1 HOUR, door OPn will appear, and the word DOOR and the I_1 icon will flash until the door is unlocked. The oven door can then

be opened, and the timer will revert back to the time of day.

Cleaning Various Parts of Your Range

Before cleaning any part of the oven, be sure all controls are turned off and the oven is cool. Remove spills and any heavy soiling as soon as possible. Regular cleaning will reduce the difficulty and time of major cleaning later.

Surface Type Recommendation

Aluminum and Vinyl Use hot, soapy water and a cloth. Dry with a clean cloth.

Painted and plastic control knobs Painted body parts

Painted decorative trims

Stainless Steel

Porcelain enamel broiler pan and insert (available by mail order)

Door liner and body parts

Oven racks Oven racks must be removed from oven cavity. Clean by using a mild, abrasive

Using a soft cloth and clean with mild dish detergent and water or a 50/50 solution of vinegar and water. Follow by rinsing the area with clean water; dry and polish with a soft cloth. Glass cleaners may be used if sprayed on a soft cloth first. Do not spray liquids directly on the oven control and display area. Do not use large amounts of water on the control panel - excess water on the control area may cause damage to the appliance. Do not use other liquid cleaners, abrasive cleaners, scouring pads, or paper towels - they will damage the finish. To remove control knobs, turn to the OFF position; grasp firmly and pull straight off the shaft. To replace knobs after cleaning, line up the flat sides of both the knob and the shaft; then push the knob into place.

Your oven finish may be made with stainless steel (some models). Clean the stainless with warm soapy water using a clean sponge or cloth. Rinse with clean water and dry with a soft clean cloth. Do not use any store bought cleaners like stainless steel cleaners or any other types of cleaners containing any abrasive, chlo- rides, chlorine or ammonia. It is recommended to use mild dish soap and water or a 50/50 solution of water and vinegar.

Gentle scouring with a soapy scouring pad will remove most spots. Rinse with a 1:1 solution of clear water and ammonia. If necessary, cover difficult spots with an ammonia-soaked paper towel for 30 to 40 minutes. Rinse with clean water and a damp cloth, and then scrub with a soap-filled scouring pad. Rinse and wipe dry with a clean cloth. Remove all cleaners or the porcelain may become damaged during future heating.

cleaner following manufacturer's instructions. Rinse with clean water and dry.

Oven door Use soap and water to thoroughly clean the top, sides, and front of the oven door.

Rinse well. You may use a glass cleaner on the outside glass of the door. Do not immerse the door in water. Do not spray or allow water or the glass cleaner to enter the door vents. Do not use oven cleaners, cleaning powders, or any harsh abrasive cleaning materials on the outside of the oven door.

Do not clean the oven door gasket. On self-clean models, the oven door gasket is made of a woven material which is essential for a good seal. Care should be taken not to rub, damage, or remove this gasket.

Oven interior

For oven interior remove excessive spillovers from oven cavity bottom before starting Self Clean. Clean any soils from oven frame and door liner outside the oven door gasket. For important cleaning precautions, refer to "Self-Cleaning Operation" on page 43.

Controlpanel Controlkeypadmembrane Decorativetrim(somemodels)

Beforecleaningthecontrolpanel,turnallcontrolsoff,activateovenlockout(onsome models),andifneededremoveanyknobsfrompanel.Donotuseabrasivecleaners onanyofthesematerials;theycanscratch.Cleanusinghot,soapywaterandacloth orsponge.Besuretosqueezeexcesswaterfromclothorspongebeforewiping controlpanel,especiallywhenwipingaroundthecontrolsarea.Excesswaterinor aroundthecontrolsmaycausedamagetotheappliance.Whenrinsing,useclean waterandaclothorspongeandbesuretosqueezeexcesswaterfromclothor spongebeforewipingthecontrolpanel.

Cooktop Maintenance

Consistent and proper cleaning is essential to maintaining your ceramic glass cooktop.

Prior to using your cooktop for the first time, apply the recommended CookTop® Cleaning Creme to the ceramic surface (on the web visit www.sears.com for replacement cooktop cleaner, item number 40079). Buff with a non- abrasive cloth or sponge. This will make cleaning easier

when soiled from cooking. The special cooktop cleaning

cream leaves a protective finish on the glass to help prevent scratches and abrasions.

Cooktop Cleaning

Do not use a cooktop cleaner on a hot cooktop. The fumes can be hazardous to your health, and can

chemically damage the ceramic-glass surface.

Sliding aluminum or copper clad bottom pans on the cooktop can cause metal markings on the cooktop surface. These marks should be removed immediately after the cooktop has cooled using the cooktop cleaning cream. Metal marks can become permanent if not removed prior to

future use.

Cookware (cast iron, metal, ceramic or glass) with rough bottoms can mark or scratch the cooktop surface.

Do not:

• Slide anything metal or glass across the cooktop.

• Use cookware with dirt or dirt build up on bottom; replace with clean cookware before using.

• Use your cooktop as a cutting board or work surface in the kitchen.

• Cook foods directly on the cooktop surface without a pan.

• Drop heavy or hard objects on the ceramic glass cooktop, they may cause it to crack.

Before cleaning the cooktop, be sure the controls are turned to OFF and the cooktop is cool. The glass surface could be hot and burns may occur if the glass surface is

For light to moderate soil:

Apply a few drops of CookTop® Cleaning Creme directly to the cooktop. Use a paper towel or use a non-abrasive cloth or sponge to clean the entire cooktop surface. Make sure the cooktop is cleaned thoroughly, leaving no residue.

For heavy, burned on soil:

Apply a few drops of CookTop® Cleaning Creme directly to the soiled area. Rub the soiled area using a non-abrasive cleaning tool, applying pressure as needed. Do not use the pad you use to clean the cooktop for any other purpose.

If soils remain, carefully scrape soils with a metal razor blade scraper, holding scraper at a 30 degree angle to the surface. Remove loosened soils with cooktop cleaning

cream and buff surface clean.

Figure 40: Cooktop care

Figure 41: Cooktop cleaning

Plastic or foods with a high sugar content need be removed immediately if spilled or melted onto the ceramic cooktop surface. Permanent damage (such as pitting of the cooktop surface) may occur if not removed immediately. After turning the surface elements off, use a razor blade scraper or a metal spatula with a mitt and scrape the soil from the hot surface (as illustrated). Allow the cooktop to cool, and use the same method for heavy or burned on soils.

Do not use the following on the cooktop:

• Do not use abrasive cleaners and scouring pads, such as metal and some nylon pads. They may scratch the cooktop, making it more difficult to clean.

• Do not use harsh cleaners, such as chlorine bleach, ammonia or oven cleaners, as they may etch or discolor the cooktop.

• Do not use dirty sponges, cloths or paper towels, as they can leave soil or lint on the cooktop which can burn

and cause discoloration.

General Cleaning

Refer to "Cleaning Various Parts of Your Range" on page 45 for more detailed information about cleaning specific parts of the range.

Before manually cleaning any part of the range, be sure all controls are turned off and the range is cool. The range may be hot and can cause burns.

Ammonia must be rinsed before operating the oven. ii Provide adequate ventilation.

Aluminum foil and utensils

Damage to the ceramic glass cooktop may occur if you use an abrasive type cleaning pad. Only use cleaning products that have been specifically designed for ceramic glass cooktops.

Figure 42: Cleaning products to avoid

Never cover any slots, holes, or passages in the oven bottom or cover an entire oven rack with materials such as aluminum foil. Aluminum foil

linings may trap heat, causing a fire hazard.

Protective Liners -- Do not use aluminum foil to line the oven bottom. Only use aluminum foil as recom-

mended in this manual. Improper installation of these liners may result in risk of electric shock, or

fire.

• Aluminum foil - Use of aluminum foil on a hot cooktop can damage the cooktop. Do not use thin aluminum cooking utensils or allow aluminum foil to touch the surface elements under any circumstances.

Aluminum utensils - The melting point of aluminum is much lower than that of other metals. Care must be

taken when aluminum pots or pans are used on the cooktop. If aluminum pans are allowed to boil dry when using the cooktop, not only will the utensil be damaged or destroyed, but it may fuse to, break, or mark the ceramic glass surface, permanently damaging the cooktop surface.

Removing and Replacing the Oven Door

The door is heavy. For safe, temporary storage, lay the door flat with the inside of the door facing down.

Oven door hinge

locations

To remove oven door:

Open oven door completely, horizontal with floor (See Figure 43).

Pull the door hinge locks on both left and right door hinges down from the oven frame completely towards the oven door (See Figure 44). A tool such as a small

flat-blade screwdriver may be required.

Firmly grasp both sides of oven door along the door sides. Do not use the oven door handle (See Figure 45).

Close the door to approximately 10 degrees from the door frame (See Figure 45).

Lift the oven door hinge arms over the roller pins located on each side of the oven frame (See Figure 46).

To replace oven door:

1. Firmly grasp both sides of oven door along the door sides. Do not use the oven door handle (See Figure 45).

Holding the oven door at the same angle as the removal position, seat the hook of the hinge arm over the roller pins located on each side of the oven door frame (See Figure 45 and Figure 46). The hook of the hinge arms must be fully seated onto the roller pins.

3. Fully open the oven door, horizontal with floor (See Figure 43).

4. Push the door hinge locks up towards and into the oven

frame on both left and right oven door hinges to the

locked position (See Figure 44).

5. Close the oven door.

(

Figure 43: Door hinge location

Figure 44: Door hinge locks

oven door-

Figure 45: Holding door for removal

Special door care instructions - Most oven doors contain glass that can break. Do not close the oven door until all the oven racks are fully in place. Do not hit the glass with pots, pans, or any other object. Scratching, hitting, jarring, or stressing the glass may weaken its structure causing an increased risk of breakage at a later time.

arm _ /

Figure 46: Replacement and location of hinge arm and roller pin

Replacing the oven light

Be sure the oven is unplugged and all parts are cool before replacing oven light.

The interior oven lights are located at the rear of the oven cavity and are covered with a glass shield. The glass shield must be in place whenever the oven is in use (See Figure 47).

Replacing the oven interior light bulb:

1. Turn electrical power off at the main source or unplug the appliance.

2. Remove interior oven light shield by pulling the light straight out. Do not twist or turn.

3. Replace bulb with a new T-4 type Halogen 25 watt appliance bulb.

Do not allow your fingers to touch the new bulb when replacing. This will shorten the life of the bulb. Use a paper towel or cotton glove while handling the new bulb

when installing. :::

4. Replace glass oven light shield.

5. Turn power back on again at the main source (or plug the appliance back in).

6. Be sure to reset the time of day on the clock.

Figure 47: Wall oven Halogen light

Oven Baking

For best cooking results, heat the oven before baking cookies, breads, cakes, pies, pastries, et cetera. There is no need to preheat the oven for roasting meat or baking casseroles.

The cooking times and temperatures needed to bake a product may vary slightly from your previously owned appli- ance.

Baking Problems and Solutions

Baking Problems

Cookies and biscuits burn • on the bottom.

Cookies and biscuits put into oven before preheating

time is completed.

Oven rack is overcrowded. Dark pans absorbs heat too

fast.

Causes Corrections

Allow oven to preheat to desired temperature before placing food in oven.

Choose pan sizes that will permit 2" to 4" of air space (5.1 cm o 10.2 cm) on all sides when placed in the

oven. Use a medium weight

baking sheet.

Cakes too dark on top or • bottom

Cakes not done in center • Oven too hot.

Cakes not level. • Oven not level.

Foods not done when cooking time is over.

Cakes put in oven before preheating time is completed.

Rack position too high or

too low, and oven too hot.

Incorrect pan size. Pan not centered in oven.

Glass cookware slow heat conductor.

• Pan too close to oven wall or rack overcrowded.

• Pan warped.

• Oven too cool. •

• Oven overcrowded.

• Oven door opened too frequently.

Allow oven to preheat before placing food in

• Use proper rack position for baking needs.

• Set oven temperature 25°F (13°C) lower than recom- mended.

Set oven temperature 25°F (13°C)lower than recom- mended.

• Use pan size suggested in recipe.

• Use proper rack position and place pan so there is 5.1 cm to 10.2 cm (2" to 4") of space on all sides of pan.

• Reduce temperature and increase cook time or use shiny bakeware.

Place a marked glass measuring cup filled with water on the center of the oven rack. If the water level is

uneven, refer to the installation instructions for leveling the oven.

Be sure to allow 5.1 cm to 10.2 cm (2" to 4") of clearance on all sides of each pan in the oven.

• Do not use pans that are dented or warped. Set oven temperature 25°F (13°C) higher than

suggested and bake for the recommended time. Be sure to remove all pans from the oven except the

ones to be used for baking. Open oven door only after shortest recommended baking time.

• Make sure to allow 2" to 4" of clearance between all pans and racks, allowing for even air flow.

to the selected temperature

the oven.

Solutions to Common Problems:

Before you call for service, review the following list. It may save you time and expense. Possible solutions are provided

with the problem listed:

Problem Solution

Poor baking results. Many factors effect baking results. Use proper oven rack position. Center food in the

oven and space pans to allow air to circulate. Preheat oven to the set temperature before placing food in the oven. Try adjusting the recipe's recommended temperature or baking time. See "Adjusting Oven Temperature" on page 37 if you feel the oven is

too hot or cold.

If your oven is cooking poorly or the Self Clean is performing badly, perform the following check: Broil, Press the Up button, and "HI" should appear on the display. Place your hand near the handle on the oven door. Between the door and the control panel, you should feel a rush of air on your hand. If so, your unit is functioning properly, and you have had a power failure in your home. If no air stream is present, call a service technician to replace your cooling fan.

Oven light does not work. Be sure the oven light is secure in the socket. See "Replacing the oven light" on

page 50.

Flames inside oven or smoking Excessive spills in oven. Grease or food spilled onto oven bottom or oven cavity.

from oven vent. Wipe up excessive spills before starting oven. If flames or excessive smoke are

present when using broil, see "Setting Broil" on page 28.

Self clean does not work. Oven control not set properly. See "Self-Cleaning Operation" on page 43. Oven racks discolored or do not Oven racks left in oven cavity during self clean. Remove oven racks from oven cavity

slide easily, before starting a self-clean cycle. Clean by using a mild abrasive cleaner following

manufacturer's instructions. Rinse with clean water, dry, and replace in oven.

Oven smokes excessively when Incorrect setting. Follow the "Setting Broil" instructions on page 28. broiling.

Oven control panel beeps and displays any F or E code error.

Areas of discoloration with

metallic sheen on cooktop surface.

Meat too close to the broil element. Reposition broil rack to provide proper clearance between the meat and broil element. Remove excess fat from meat. Cut remaining fatty edges to prevent curling, but do not cut into lean.

Grease build up on oven surfaces. Regular cleaning is necessary when broiling frequently. Grease or food splatters will cause excessive smoking.

Oven control has detected afault or error condition. Press the off key to clear the error code. Try bake or broil function. Ifthe F or E code error repeats, turn off the power to appliance, wait 5 minutes, and then repower appliance. Set clock with correct time of day. Try bake or broil function again. If fault recurs, press the off key to

clear. Mineral deposits from water and food. Remove using the recommended CookTop®

Cleaning Creme to the ceramic surface (on the web visit www.sears.com for replace- ment cooktop cleaner, item number 40079). Buff with a non-abrasive cloth or sponge

Soilnotcompletelyremovedafter selfclean.

Convectionfandoesnotrotate. Ovendoorisopen.Convectionfanwillturnoffifovendoorisopenedwhenconvec-

Surfaceelementistoohotornot Incorrectsurfacecontrolsetting.Adjustpowerlevelsetting. hotenough.

Surfaceelementdoesnotheator Besurethecorrectsurfacecontrolknobisturnedonforelementneeded. doesnotheatevenly.

Scratchesorabrasionson cooktopsurface.

Selfcleanwasinterrupted.Reviewinstructionson"Self-CleaningOperation"on page43.Excessivespillsonovenbottom.Cleanbeforestartingselfclean.Failureto cleansoilfromtheovenframe,thedoorlineroutsidetheovendoorgasket,andthe

smallareaatthefrontcenteroftheovenbottom.Theseareasarenotintheself- cleaningarea,butgethotenoughtoburnonresidue.Cleantheseareasbefore

startingtheself-cleaningcycle.Burned-onresiduecanbecleanedwitha stiffnylon brushandwateroranylonscrubber.Becarefulnottodamagetheovengasket.

IfyouroveniscookingpoorlyortheSelfCleanisperformingbadly,performthe followingcheck:Boil,PresstheUpbutton,and"HI"shouldappearonthedisplay. Placeyourhandnearthehandleontheovendoor.Betweenthedoorandthecontrol panel,youshouldfeelarushofaironyourhand.Ifso,yourunitisfunctioning properly,andyouhavehadapowerfailureinyourhome.Ifnoairstreamispresent, callaservicetechniciantoreplaceyourcoolingfan.

tionisactive.Closeovendoor.

Lightweightorwarpedpansused.Useonlyflat,evenlybalanced,mediumorheavy- weightcookware.Flatpansheatbetterthanwarpedpans.Cookwarematerialsand weightofthematerialaffectheating.Heavyandmedium-weightpansheatevenly. Becauselightweightpansheatunevenly,foodsmayburneasily.

Coarseparticlessuchassaltorhardenedsoilsbetweencooktopandutensilscan causescratches.Besurecooktopsurfaceandbottomsofutensilsarecleanbefore usage.Smallscratchesdonotaffectcookingandwillbecomelessvisiblewithtime.

Cleaningmaterialsnotrecommendedforceramic-glasscooktophavebeenused. ApplytherecommendedCookTop®CleaningCremetotheceramicsurface(onthe webvisitwww.sears.comforreplacementcooktopcleaner,itemnumber40079).Buff withanon-abrasiveclothorsponge.Formoreinformationsee"CooktopMainte- nance"onpage47.

Cookwarewithroughbottomwasused.Usesmooth,flat-bottomedcookware.

Metalmarksonthecooktop.

Brownstreaksorspeckson Boiloversarecookedontosurface.Userazorbladescraperto removesoil.Formore cooktopsurface, informationsee"CooktopMaintenance"onpage47.

Applianceis notlevel. Besurefloorislevel,strong,andstableenoughtoadequatelysupportrange.

Slidingorscrapingofmetalutensilsoncooktopsurface.Donotslidemetalutensils oncooktopsurface.ApplytherecommendedCookTop®CleaningCremetothe ceramicsurface(onthewebvisitwww.sears.comforreplacementcooktopcleaner, itemnumber40079).Buffwithanon-abrasiveclothorsponge.Formoreinformation, see"CooktopMaintenance"onpage47.

Iffloorissaggingorsloping,contacta carpentertocorrectthesituation. Poorinstallation.Placeovenrackincenterofoven.Placealevelontheovenrack.

Adjustlevelinglegsatbaseofapplianceuntiltherackislevel. Kitchencabinetalignmentmaymakerangeappearnotlevel.Besurecabinetsare

squareandhavesufficientroomforapplianceclearance.

Cannotmoveapplianceeasily.

Appliancemustbeaccessiblefor

service.

Cabinetsnotsquareorarebuiltintootightly.Contactbuilderorinstallertomake applianceaccessible.

Carpetinterfereswithappliance.Providesufficientspacesoappliancecanbelifted overcarpet.

Entireappliancedoesnot

operate.

Fannoiseduringcooking Acoolingfanmayautomaticallyturnonandofftocoolinternalparts.Itisnormal,and

operation, thefanmaycontinuetorunevenafterovenisturnedoff.

Makesurepowercordispluggedproperlyintooutlet.

Electricalpoweroutage.Checkhouselightstobesure.Callyourlocalelectric companyforserviceoutageinformation.

Servicewiringisnotcomplete.Call1-800-4-MY-HOME®forassistance(Seeback cover).

Yourapplianceiscoveredbyaoneyearlimitedwarranty.Foroneyearfromyouroriginaldateof

purchase,Electroluxwillpayallcostsfor repairingorreplacinganypartsofthisappliancethatprove tobedefectiveinmaterialsorworkmanshipwhensuchapplianceisinstalled,usedandmaintainedin

accordancewiththeprovidedinstructions.

Exclusions

This warranty does not cover the following:

1. Products with original serial numbers that have been removed, altered or cannot be readily determined.

2. Product that has been transferred from its original owner to another party or removed outside the USAor Canada.

3. Rust on the interior or exterior of the unit.

4. Products purchased "as-is" are not covered by this warranty.

5. Food loss due to any refrigerator or freezer failures.

6. Products used in a commercial setting.

7. Service calls which do not involve malfunction or defects in materials or workmanship, or for appliances not in ordinary household use or used other than in accordance with the provided instructions.

8. Service calls to correct the installation of your appliance or to instruct you how to use your appliance.

9. Expenses for making the appliance accessible for servicing, such as removal of trim, cupboards, shelves, etc., which are not a part of the appliance when it is shipped from the factory.

10. Service calls to repair or replace appliance light bulbs, air filters, water filters, other consumables, or knobs, handles, or other cosmetic parts.

11. Surcharges including, but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry trip charges, or mileage expense for service calls to remote areas, including the state of Alaska.

12. Damages to the finish of appliance or home incurred during installation, including but not limited to floors, cabinets, walls, etc.

13. Damages caused by: services performed by unauthorized service companies; use of parts other than genuine Electrolux parts or parts obtained from persons other than authorized service companies; or

external causes such as abuse, misuse, inadequate power supply, accidents, fires, or acts of God.

DISCLAIMEROF IMPLIED WARRANTIES; LIMITATION OF REMEDIES CUSTOMER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT

REPAIR OR REPLACEMENT AS PROVIDED HEREIN. CLAIMS BASED ON IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW, BUT NOT LESSTHAN ONE YEAR. ELECTROLUX SHALL NOT BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL

EXPENSES RESULTING FROMANY BREACH OF THIS WRITTEN LIMITED WARRANTY OR ANY IMPLIED WARRANTY. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL

OR CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES, SO THESE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WRITTEN WARRANTY GIVES YOU SPECIFIC

LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE.

If You Need Service

This warranty only applies in the USA and Canada. In the USA, your appliance is warranted by Electrolux Major Appliances

North America, a division of Electrolux Home Products, Inc. In Canada, your appliance is warranted by Electrolux Canada Corp. Electrolux authorizes no person to change or add to any obligations under this warranty. Obligations for service and parts under

this warranty must be performed by Electrolux or an authorized service company. Product features or specifications as described or illustrated are subject to change without notice.

USA ! .800.944.9044

Electrolux Home Products, Inc. Electrolux

10200 David Taylor Drive Charlotte, NC 28262

Keep your receipt, delivery slip, or some other appropriate payment record to establish the warranty period should service be required. If service is performed, it is in your best interest to obtain and keep all receipts.

Service under this warranty must be obtained by contacting Electrolux at the addresses or phone numbers below.

!.800.265.8352

Electrolux Canada Corp.

5855 Terry Fox Way

Mississauga, Ontario, Canada

Canada

L5V 3E4

Frigidaire CGES3065PFF, CGES3065PFK, CGES3065PWG, CGES3065PWH, CPES3085PFA Owner’s Manual

Specifications and Main Features

Frequently Asked Questions

User Manual