Frigidaire AGQ6400HS1, AGQ6400HS0, AGQ6400HE1, AGQ6400HE0, AGQ6000ES4 Owner’s Manual
DRYER OPERATING INSTRUCTIONS
Towels (_)
Heavy Duty
Normal
Perm Press
Delicates (_
Touch Up
Timed Dry (_
Temperature Options j Start/Pause
Before Operating Your Dryer
Read your dryer Owner's Guide. Ithas important safety and warranty
information. It also has many suggestions for best drying results.
To reduce the risk of fire, electric shock or injury to
persons, read the IMPORTANT SAFETY INSTRUCTIONS inyour dryer
Owner's Guide before operating this appliance.
Operating Steps
Read 'Owing Procedures" in your Owner's Guide. It explains these
operating steps in detail.
1. Prepare items for drying.
2. Check that tint filter is clean and in place.
3. Load the dwer. If desired, add a dwer fabric softener sheet. Close
the door.
4. Select the appropriate cycle and settings for each toad.
, Turn the Cycle Selector knob to select the cycle. The estimated
drying time wilt be displayed.
, A suitable drying temperature, dryness level and options will
automatically be indicated for each cycle. See the "Dryer Setting
Chart" for more details.
,To change the temperature and dryness level, press
Temperature or Dryness until the desired selections are made.
, To select or delete an option, press Options; then,
while the indicator is blinking, press Select. The indicator will
light when the option has been selected, it wilt no longer be
lighted when the option has been deleted.
, If a temperature, dryness level or option is not available for a
cycle, itwill not light.
, Adjustments to the cycle will be remembered each time that
cycle is selected in the future.
, To return to factory settings, press Start/Pause and Select at the
same time and hold until the signal sounds.
5. Press Start/Pause to begin the cycle.
, To pause the cycle press Start/Pause. To resume the cycle,
press Start/Pause again.
, To stop or change the cycle, press Cancel.
6. A signal will sound at the end of the cycle and periodically during
Extended Tumble when the Signal option is selected. When the
cycle ends, remove items immediately and hang or fold.
7. Clean the lint screen after every load.
Cycle Selection
Turn the Cycle Selector knob to the desired cycle. For best results,
follow the fabric care label instructions on items to be dried. If the
selection is changed after the cycle starts, the indicator lights wilt
blink, the signal wilt beep and "Err' will be displayed. To change
the selection after the cycle has begun, press Cancel before making
another choice. Just turning the knob to another selection will not
change the cycle. The signal will beep and the status lights wilt
flash, but the original cycle will continue.
Auto Dry
Auto Dry cycles take the guesswork out of drying time. Loads dried
using the Towels, Heavy Duty, Normal, Perm Press, and Deticates
cycles wilt dry automatically at the selected temperature to the desired
dryness level. The dryer uses sensing bars to sense the moisture
O Maximum
O High O More Dry
O Medium O Normal
O Low O Less Dry
O Air Fluff/ O Damp Dry
No Heat
Dryness
O Shrink Guard
O Extended Tumble 0 Drying
O Signal Volume 0 ExtendedTumble
Select Cancel
0 dool Down
level of the toad as it tumbles through heated air. Auto Dry cycles
save. time and energy and protect fabrics. The estimated drying time
will be displayed for about 5 minutes. Then the outside of the
display wilt light up in a circular track to indicate the drying time is
automatically being determined by the sensors. When the load has
reached the selected dryness level, it wilt continue to tumble,
unheated, during a Cool Down period. This helps reduce wrinkling
and makes items easier to handle during unloading. The estimated
Cool Down time will be displayed.
Drying time varies depending on size and dampness of load and
fabric type. If the load is too small or almost dry, the sensing bars
may not detect enough moisture to continue the cycle and the cycle
may end after a few minutes. Select a Timed Dry setting to dry such
loads.
Room temperature and humidity, type of installation and electrical
voltage or gas pressure can also affect drying time.
"rowe Is
Select this Auto Dry cycle for towel loads.
Heavy Duty
Select this Auto Dry cycle for sturdy work clothes.
Normal
Select this Auto Dry cycle for cotton items.
Perm Press
Select this Auto Dry cycle for cottons and blends with a no-iron finish.
Delicates
Select this Auto Dry cycle for knits and delicate items.
Touch Up
Select Touch Up to help remove wrinkles from clean dry items that
may have been left in the dryer, have been stored in crowded closets
or drawers or unpacked from luggage following a trip. The load will
tumble for 15 minutes at low heat.
Timed Dry
To manually select the drying time for any toad, turn the knob to
Timed Dry. Drying times from 15 to 90 minutes can be selected by
continuing to turn the knob. Drying time will be displayed. You will
not be able to select a dryness level. Timed Dry is recommended
when using the Air Fluff/No Heat setting.
Note: To change cycles, press Cancel.
To avoid fire hazard, do not use heat to dry items
containing feathers or down, foam rubber, plastic, or similarly tex-
tured, rubber-like materials. Use the Air Fluff/No Heat setting only.
Cycle Options
Appropriate drying Temperature, Dryness Level and Options will
automatically be displayed for each cycle. The settings can be
changed before the cycle is started.Those adjustments wilt
automatically be remembered each time that cycle is selected. If a
temperature, dryness level or option is not recommened for a cycle,
the indicator wilt not light. If changes are attempted after the cycle
starts, the lights will blink, the signal will beep and "Err" will be
displayed. To change a setting after the cycle starts, press Start/
Pause, adjust the setting and press Start/Pause to resume the cycle.
See the "Dryer Settings Chart" for more details.
PN 137100900 (0806)
Cycle Options (con't)
Drying Temperature
For best results, follow the fabric care label instructions on items to
be dried. To change the drying temperature, press Temperature to
scroll to the desired heat. To protect your wardrobe, not all
temperatures are available with every cycle.
Maximim heat is recommended for sturdy fabrics.
High heat is recommended for most cotton fabrics.
Medium heat is recommended for wrinkle free, permanent press
and lightweight fabrics.
Low heat is recommended for delicate fabrics.
Air Fuff/No Heat should only be used with a Timed Dry setting to dry
items containing feathers, down, foam rubber, plastics or rubber-
like materials; to freshen clothing, pillows or blankets; or to dust
draperies.
cycle will result in tong drying times and/or
Note: Using Air Ftuff/No Heat in any Auto Dry
wet loads at the end of the cycle.
Dryness Level
To change the dryness level, press Dryness until the desired selection
is made. Select Normal for most loads.
Occasionally a load may seem too damp or over-dried at the end of
the cycle. To increase drying time for similar loads in the future,
select More Dry. For loads requiring less drying time, select Less
Dry.
Select Damp Dry for items you wish to partially dry before hanging or
ironing.
Note: To prevent over-drying, not every drynesslevel is available with every cycle.
J
1
Options
To select an option, press Options until the indicator for the desired
option flashes, then press Select. If an option is not available for a
cycle, the indicator will not light. Follow the same steps to delete an
option.
A Signal will sound at the end of the cycle and periodically during
Extended Tumble. The signal has an adjustable volume level or can
be turned off.
Select Shrink Guard to lower the initial drying temperature to protect
fabrics from overdrying.
Select Extended Tumble if the dried load might not be removed
promptly at the end of the cycle. The dry load wilt continue tumbling
without heat for 30 minutes to help reduce wrinkling. When the
Signal is selected, a beep will be heard periodically. The load may
be removed any time during Extended Tumble.
Dryer Features
O Control Lock
To avoid having someone accidentally start or stop the dryer, press
Options and Select at the same time and hold for 10 seconds. "LOC"
will be displayed. To remove the control lock, press Options and
Select again.
StartlPause
Press Start/Pause to start, pause or restart a cycle. "PAU" will be
displayed alternately with the estimated time remaining when the
cycle is paused.
Cancel
Press Cancel to stop the cycle.
Status Lights
The following indicators may be lighted during the cycle:
o Drying
o Cool Down
= Extended Tumble
AVAILABLE CYCLE SETTINGS - These temperatures, dryness levels and options are available with the following cycles:
Towels Heavy Duty Normal Perm Press Delicate Touch Up Timed Dry
Estimated 15 to 90
Drying Time ** minutes
Temperatures
Maximum ,,/ ,,/ ,,/ ,,/
High ,/ ,/ ,/ ,/ * ,/
Medium ,,/ ,,/ * ,,/ ,,/ ,,/
Low v" v" v" * ,,/ * ,,/ ,,/
Air Fluff/No Heat ,/
Dryness Level
More Dry * ,/ ,/ ,/
Normal Dry ,/ * ,/ * ,/ * ,/ ,/
Less Dry v" v" v" * ,,/
Damp Dry v" v" v" v"
Options
Shrink Guard ,/ ,/ ,/ ,/ ,/
60 minutes 45 minutes 50 minutes 40 minutes 20 minutes 30 minutes
Extended Tumble ,/ ,/ * ,/ * ,/ ,/ ,/
Signal Volume * ,/ * ,/ * ,/ * ,/ * ,/ * ,/ * ,/
• Factory Settings ,/Available Settings
** Estimated cycle duration is based on normal dryness level and factory settings.
PN 137100900 (0806)
CONSIGNES D'UTILISATION DE SECHEUSE
Towels C_)
Heavy Duty (_ _
Normal ([_)
Perm Press (_
Delicates ([_D
Touch Up C_)
Timed Dry ([_)
0 Maximum
0 High 0 More Dry
0 Medium 0 Normal 0 Shrink Guard
0 Low 0 Less Dry 0 Extended Tumble
0 Air Fluff/ 0 Damp Dry 0 Signal Volume
Temperature Dryness Start/Pause
Avant de faire fonctionner votre s6cheuse
Lisez votre Guide du propri6taire de s6cheuse. It contient des
informations importantes relatives a ta securit6 et a la garantie. It
comprend aussi de nombreuses suggestions pour obtenir des
resultats de sechage optimums.
Pour reduire te risque d'incendie, de choc
etectrique ou de btessure, tisez les INSTRUCTIONS IMPORTANTES
DE S¢:CURIT¢: dans votre Guide du proprietaire avant de faire
fonctionner cet appareit.
Etapes de fonctionnement
Lisez les <<procedures de sechage >>dans votre Guide du
proprietaire. I1explique en detaits ses etapes de fonctionnement.
1. Preparez les articles a secher.
2. Verifiez que le fittre a charpie est propre et en place.
3. Chargez la secheuse. Si desir6, ajoutez un adoucisseur
de tissu pour secheuse. Fermez la porte.
4. Selectionnez le cycle approprie et les reglages pour
chaque charge.
, Tournez le bouton de Selection de cycle (CyclSetector) pour
selectionner le cycle. La duree estimee de sechage
s'affiche.
, Une temperature appropriee de sechage, le niveaude
deshumidification et les options s'affichent automatiquement
pour chaque cycle. Voir le Tableau de reglage de secheuse
pour obtenir de plus amples details.
, Pour modifier la temperature et le niveau de
deshumidification, appuyez sur Temperature ou
deshumidification (Dryness) jusqu'a ce que la selection desir6e
soit effectuee.
, Pour selectionner ou annulet une option, appuyez sur Options.
Ensuite, alors que t'indicateur clignote, appuyez sur Selectionner
(Select). Uindicateur s'allume lorsque t'option est setectionn6e.
I1s'eteint lorsque t'option est annulee.
, Si la temperature, te niveau de deshumidification ou t'option
n'est pas disponible pour le cycle, t'indicateur ne s'altume pas.
/_,t'avenir, chaque fois que te cycle est setectionn6, l'appareit
aura en memoire les regtages du cycle.
Pour revenir aux regtages en usine, appuyez sur D 6 m a r re r/
pause (Start/Pause) et Selectionner (Select) en m6me temps
jusqu'a ce que le signal sonore retentisse.
5. Appuyez sur D6marrer/pause pour demarrer le cycle.
Pour arr6ter te cycle ou faire une pause, appuyez sur
D6marrer/pause. Pour reprendre le cycle, appuyez de
nouveau sur D6marrer/pause.
O Drying
0 Coot Down
No Heat
Select
Options j
0 Extended Tumble
Cancel
, Pour annulet ou modifier le cycle, appuyez sur Annuler
(Cancel).
6. Un signal sonore retentit a ta fin du cycle et periodiquement
durant le culbutage prolonge lorsque t'option Signal est
selectionn6e. ,ik la fin du cycle, retirez immediatement les ar-
ticles, suspendre ou plier.
7. Nettoyez le fittre a charpie apres chaque charge.
S61ection de cycle
Tournez le bouton Selection de cycle au cycle desir6. Pour de
meitteurs resultats, suivez les instructions de soins du tissu sur
les articles a secher. Si la selection est modifiee apres le
demarrage du cycle, les indicateurs lumineux clignotent, te signal
sonore retentit et <<ERR >>(erreur) s'affiche. Pour modifier la
selection apres te debut du cycle, appuyez sur Annuler avant
d'effectuer un autre choix. Le fait de tourner simplement te bouton
une autre selection ne modifie pas le cycle. Le signal sonore
retentit et tes tumieres d'etat ctignotent, mais ta selection originate
se poursuit.
S6ehage automatique
Les cycles de Sechage automatique (Auto Dry) eliminent tes
jugements approximatifs quant a ta duree du sechage. Les
charges s6chees a t'aide des cycles Serviettes (Towels), Haute
performance (Heavy Duty), Normal (Normal), Sans repassage
(Perm Press) et Deticat (Deticates) sechent automatiquement a la
temperature setectionn6e au niveau de deshumidification desir6.
La secheuse utitise des barres de captage pour capter le niveau
d'humidite de ta charge pendant qu'etle bascule dans Fair chaud.
Les cycles de Sechage automatique economisent du temps et de
l'energie et protegent les tissus. La duree estimee de sechage
s'affiche durant environ 5 minutes. Alors te cercle exterieur de
l'indicateur numerique encendera circulairement, pour indiquer que
le temps de de s6che est automatiquement catcule par tes capteurs.
Lorsque ta charge a atteint le niveau de deshumidification
selectionn6, elle continue a culbuter, sans chaleur, durant la periode
de refroidissement. Cette periode aide a reduire te froissement et
rend les articles plus facites a manipuler durant te dechargement.
La duree estimee de la periode de refroidissement s'affiche. La
duree de sechage varie en fonction de la tailte et de t'humidite de la
charge et du type de tissu. Si la charge est trop petite ou presque
seche, it est possible que tes barres de captage ne detectent pas
suffisamment d'humidite pour poursuivre te cycle et te cycle peut
se terminer apres quetques minutes. Selectionnez un reglage
Sechage chronom6tre (Time Dry) pour secher ces charges. La
temperature ambiante et l'humidite, te type d'installation et la ten-
sion etectrique ou la pression du gaz peuvent aussi affecter la
duree de sechage.
PN 137100900 (0806)
Loading...