Frigidaire 134818800 (0610) Operating Instructions Manual
Printed in U.S.A.
P/N 134818800 (0610)
Laundry Center Dryer Operating Instructions
MORE DRY
COOL
DOWN
20
30
40
50
60
70
AUTOMATIC
COLORS
TIMED DRY
START
TEMPERATURE
DELICATES
LOW HEAT
AIR FLUFF
NO HEAT
WHITES
HIGH HEAT
COLORS
MEDIUM HEAT
COOL
DOWN
AUTOMATIC
WHITES
START
ON
NORMAL
LESS DRY
PRESS SAVER
Before Operating Your Dryer
Read your Owner's Guide. It has important safety
and warranty information. It also has many suggestions
for best drying results.
To reduce the risk of fire, electric
shock, or injury to persons, read the IMPORTANT
SAFETY INSTRUCTIONS in your owner's guide before
operating this appliance.
Operating Steps
Read Drying Procedures in your Owner's Guide. It
explains these operating steps in detail.
1. Prepare items for drying.
2. Check that lint screen is clean and in place.
3. Load the dryer. If desired, add a dryer fabric
softener sheet.
4. Close the dryer door.
5. Set Drying Temperature control.
6. Turn cycle selector clockwise to desired
setting.
7. Start dryer. Turn the Turn to Start control
clockwise to ON. Hold for 1-2 seconds and release.
8. A signal will sound when the cycle ends.
9. Remove items immediately and hang or fold.
10. Clean lint screen after every load.
Temperature Selection
Always follow directions on fabric care
labels.
To avoid fire hazard, do not use heat to
dry items containing feathers or down, foam rubber,
plastics, or similarly textured, rubber-like materials. Use
Air Fluff-No Heat setting only.
The WHITES-HIGH HEAT, COLORS-MEDIUM HEAT,
and DELICATES-LOW HEAT temperature settings may
be used with any cycle setting.
The AIR FLUFF-NO HEAT setting can be used only
in the Timed Dry cycle.
AIR FLUFF-NO HEAT setting tumbles the load without
heat. Use Air Fluff to freshen clothing, pillows or
blankets, or to dust draperies.
Laundry Center Features
SELF-CLEANING
LINT FILTER
SAFETY LID
LOCK
MODEL-SERIAL
NUMBER PLATE
BLEACH
DISPENSER
LINT
FILTER
OPENING
DRYING
RACK
SAFETY
DOOR
SWITCH
DYNAMIC
BALANCE
SYSTEM
CONVENIENCE
HANGER
FABRIC
SOFTENER
DISPENSER
Automatic Whites Cycle
This cycle is best for cotton items that can be
tumble dried.
Drying time is determined automatically at the
temperature selection of your choice. This cycle
is best for items of similar fabric, weight and
construction.
• For items requiring more drying time, set cycle
selector on MORE DRY.
• For items requiring less drying time, set cycle
selector on LESS DRY.
Timed Dry Cycle
This cycle provides up to 70 minutes of drying
time at the temperature selection of your choice.
Energy Saving Tips
• Keep the lint screen clean and exhaust the
dryer correctly.
• Sort laundry properly and select proper
temperature and cycle settings. Choose an
automatic dry cycle whenever possible for
accurate drying time.
• Dry only full loads. Single items and small loads
usually take longer to dry.
• Avoid overloading, adding wet items to a
partially dry load, and overdrying.
• Dry one load after another to take advantage
of a warm dryer.
• Opening the door needlessly causes warm air
to escape, which prolongs drying time.
• If possible, use the dryer on low humidity days.
• Install the dryer in an area where the room
temperature is at least 45°F (7°C).
P/N 134818800 (0611)
Cycle Selection
Turn cycle selector clockwise to desired cycle and
setting.
Each cycle ends with a cool down period. The
heat automatically turns off and the load continues
to tumble for 5-10 minutes. This reduces wrinkling
and makes items easier to handle during
unloading.
Drying time varies depending on size and dampness
of load, weight and fabric type. Room temperature
and humidity, type of installation and electrical
voltage or gas pressure can also affect drying
time.
Automatic Colors Cycle
This cycle is best for permanent press, knit and
delicate items. Drying time is determined
automatically at the temperature selection of
your choice.
• Medium heat is suggested for permanent press
items.
• Low heat is suggested for knit and delicate
items.
If the dried load cannot be removed promptly, the
cycle selector will advance to the Press Saver
setting. Unheated tumbling continues during Press
Saver for 40 minutes to help reduce wrinkling.
The cycle signal will sound briefly every 5 minutes
as a reminder to remove the load. If the load is
removed before time has elapsed, turn the cycle
selector knob to Off.
Note: Use the Automatic Whites cycle if you do
not want to hear the cycle signal during
Press Saver.
P/N 134818800 (0611)
Printed in U.S.A.
Before Operating Your Washer
Read your Washer Owner's Guide. It has important safety
and warranty information. It also has many suggestions for
best washing results.
To reduce the risk of fire, electric shock, or
injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS in your Washer Owner's Guide before operating this
appliance.
Operating Steps
Read Washing Procedures in your Owner's Guide. It
explains these operating steps in detail.
1. Sort laundry into loads that can be washed together.
2. Prepare items for washing.
3. Pretreat stains and heavy soil.
4. Add the measured amount of detergent to wash tub
before adding the laundry load.
5. If desired, add liquid bleach to bleach dispenser. DO
NOT pour bleach directly onto the load.
6. If desired, add liquid fabric softener to fabric
softener dispenser. DO NOT pour fabric softener
directly onto wash load.
7. Add laundry load loosely to wash tub. Dry load
should not be higher than top of agitator vanes.
For best results, DO NOT overload.
8. Select the wash cycle and settings according to type,
size and soil level of each load.
9. Close lid and pull out Cycle Selector knob to start
washer. The washer will fill with water but will not agitate
or spin with the lid open.
To stop the washer, push in the Cycle Selector knob. To
change a cycle, push in the Cycle Selector knob and turn
it clockwise to the desired setting. Pull out the knob to
restart the washer.
10. Remove items at end of cycle. Wait about 2-3 minutes
for safety lid lock to release.
Cycle Selection
Push in and turn the Cycle Selector knob clockwise to
the desired cycle. For best results, follow the
washing instructions on the fabric care labels.
The Whites, Colors and Knits/Delicates cycles progress
through wash agitation, drain and spin with a spray
rinse, rinse agitation, and a final spin.
Whites Cycle
This cycle provides up to 15 minutes of normal agitation and
a fast spin for most fabrics.
Colors Cycle
This cycle provides up to 12 minutes of normal agitation
and a fast spin for cottons and blends with a no-iron
finish. A cool down spray rinse helps reduce wrinkling.
LAUNDRY CENTER WASHER OPERATING INSTRUCTIONS
SMALL
(LOW)
LARGE (FULL)
RINSE
15
12
8
4
REGULAR/WHITES
LOAD SIZE (WATER LEVEL)
HOT
COLD
WARM
WARM
COLD
COLD
WARM
COLD
WASH/RINSE TEMPERATURE
SOAK/
PREWASH
PERM
PRESS/COLORS
12
8
4
RESET
MEDIUM
RINSE
FINAL SPIN
SOME MODELS
*
*
*
SOAK
PREWASH
FINAL SPIN
6
KNITS/
DELICATES
FINAL SPIN
RINSE
COLD
COLD
•
LOAD SIZE
Loading...