Frigidaire 134145400A User Manual

OPERATING INSTRUCTIONS

TEMPERATURE

PERM PRESS/COLORS

MEDIUM HEAT

REGULAR/WHITES

HIGH HEAT

* SOME MODELS

KNITS/DELICATES

LOW HEAT

AIR FLUFF

NO HEAT

ON

*

Versión en español

Si desea obtener una copia en español de estas
Instrucciones de Funcionamiento, sírvase escribir a
la dirección que se incluye a continuación.
Solicite la P/N 131921000.

Spanish Owner's Guides
Frigidaire Company
P. O. Box 212378
Augusta, GA 30917

Before Operating Your Dryer

Read your dryer Owner's Guide.

safety and warranty information. It also has many
suggestions for best drying results.

It has important

*

OFF

START

Operating Steps

Read Drying Procedures in your Owner's Guide.

explains these operating steps in detail.

1. Prepare items for drying.

2. Check that lint screen is clean and in place.

3. Load the dryer.

softener sheet.

4. Close the dryer door.

5. Set Temperature control.

6. Turn cycle selector clockwise to desired
setting.

If desired, add a dryer fabric

TIMED DRY
REGULAR

It

COOL DOWN

20

30

40

50

60

70

START

LESS DRY

AUTOMATIC
PERM PRESS/COLORS

PRESS SAVER

MORE DRY

T emperature Selection

Always follow directions on fabric care labels.

To avoid fire hazard, do not use heat to
dry items containing feathers or down, foam rubber,
plastics, or similarly textured, rubber-like materials. Use
Air Fluff-No Heat setting (some models) or Cool Down
only.

The

REGULAR-HIGH HEAT, PERM PRESS-MEDIUM

HEAT

, and

erature settings may be used with any cycle setting. The

AIR FLUFF-NO HEAT

only in the Timed Dry cycle.

KNITS/DELICATES-LOW HEAT

setting (some models) can be used

temp-

To reduce the risk of fire, electric
shock, or injury to persons, read the IMPORTANT
SAFETY INSTRUCTIONS in your dryer owner's guide
before operating this appliance.

Printed in U.S.A.

7. Push START button for 2 seconds or turn the
START knob clockwise to ON, hold for 1-2
seconds and release.

8. A signal will sound when the cycle ends. The
Cycle Signal is adjustable on some models.

9. Remove items immediately and hang or fold.

10. Clean lint screen after every load.

AIR FLUFF-NO HEAT

setting (some models) tumbles the
load without heat. Use Air Fluff (some models) or Cool
Down to freshen clothing, pillows or blankets, or to dust
draperies.

P/N 134145400A (0503)

PERM PRESS/COLORS

MEDIUM HEAT

REGULAR/WHITES

HIGH HEAT

TEMPERATURE

KNITS/DELICATES

LOW HEAT

AIR FLUFF

NO HEAT

*

ON

OFF

*

START

COOL DOWN

20

30

40

START

AUTOMATIC
PERM PRESS/COLORS

PRESS SAVER

* SOME MODELS

Cycle Selection

Turn cycle selector clockwise to desired cycle and
setting.

Each cycle ends with a cool down period. The heat
automatically turns off and the load continues to
tumble for 5-10 minutes. This reduces wrinkling and
makes items easier to handle during unloading.

Drying time varies depending on size and dampness of
load, weight and fabric type. Room temperature and
humidity, type of installation and electrical voltage or
gas pressure can also affect drying time.

Automatic Perm Press/Colors Cycle

This cycle is best for permanent press, knit and delicate
items. Drying time is determined automatically at the
temperature selection of your choice.

• Medium heat is suggested for permanent press
items.

TIMED DRY
REGULAR

setting where unheated tumbling continues for 40
minutes to help reduce wrinkling.

Unless the Cycle Signal has been turned off (some
models), it will sound briefly every 5 minutes as a

reminder to remove the load.

Automatic Regular/Whites Cycle

This cycle is best for cotton items that can be tumble
dried.

Drying time is determined automatically at the
temperature selection of your choice. This cycle is best
for items of similar fabric, weight and construction.

• For items requiring more drying time, set cycle
selector on

• For items requiring less drying time, set cycle selector
on

LESS /MIN

MORE/MAX

50

60

70

MORE DRY

LESS DRY

Energy Saving Tips

• Keep the lint screen clean and exhaust the dryer
correctly.

• Sort laundry properly and select proper temperature
and cycle settings. Choose an automatic dry cycle
whenever possible for accurate drying time.

• Dry only full loads. Single items and small loads
usually take longer to dry.

• Avoid overloading, adding wet items to a partially dry
load, and overdrying.

• Dry one load after another to take advantage of a
warm dryer.

• Opening the door needlessly causes warm air to
escape, which prolongs drying time.

• If possible, use the dryer on low humidity days.

• Low heat is suggested for knit and delicate items.

If the dried load cannot be removed promptly, the cycle
selector will advance to the

Press Saver/Fabric Sentry

Timed Dry Regular Cycle

This cycle provides up to 70 minutes of drying time at
the temperature selection of your choice.

• Install the dryer in an area where the room temperature
is at least 45°F (7°C).

P/N 134145400A (0503)