Friedrich Metal Products PDXDA Installation Manual

Models PDXDA / PDXDE

Installation Instructions

LATERAL DUCT
AND DUCT EXTENSION KIT

For Use With Packaged Terminal Units

Please read these instructions completely before attempting
installation.

NOTE: These instructions apply to installation of the Lateral Duct and Duct Extension Kit used with 208/230 and 265V
Packaged Terminal Units ONLY. Refer to Chassis Installation/Operation Manual for additional information.

THE INSTALLATION OF THE DUCT ADPTER IS TO BE COMPLETED AFTER THE UNIT ARRIVES ON THE JOB SITE.

Contents of Lateral Duct Kit (PDXDA)

NOTE: Right hand installation is show throughout the manual. Caulking is recommended for interior seams.

1. Electrical shock hazard.

2. Electrical power MUST be

3. Failure to disconnect power

WARNING

disconnected.

can result in property damage,
personal injury and/or death.

Contents Duct Extension Kit (PDXDE)

NOTE: Duct extensions come in three foot
lengths. They can be combined for a total
straight maximum extension length of 15’,
or they can be cut to any desired length.

920-101-02 (12-04)