Reliable performance and low sound begins with durable materials and the
highest quality components
®
Durable Construction
Superior materials and design reduce sound
levels and improve overall guest satisfaction
Aluminum endplates reduce corrosion of the
outdoor coil.
Galvanized zinc coated steel wall sleeve and
steel base pan undergo an 11-step preparation
process, are powder coated with a polyester
finish, and are oven-cured at high temperature
for exceptional durability.
Factory run-tested units reduce problems in
the eld.
Internal diagnostic program can alert
maintenance to component failures or
operating problems.
Easy access anti-microbial lters simplify
maintenance and extend the life of the product.
Room freeze protection initiates heat if the
temperature falls to 50°F inside an unoccupied
guest room.
Random compressor restart protects electrical
systems from overload when power is restored.
Tamper-resistant, anodized stamped
aluminum grille withstands chalking and
oxidation.
Break proof control door design maintains the
integrity of the unit.
Indoor coil frost sensor protects the
compressor to lengthen the life of the unit.
DiamonBlue Advanced Corrosion Protectio
comes standard on all PTACs for long life in
harsh coastal environments.
n®
Friedrich PTACs utilize a modular design that provides
easy access to key components for maintenance or
service
Indoor coil frost sensor
protects compressor
Reversible louvers for
air path modications
Easy-access,
interchangeable
antimicrobial air
lters
IMPORTANT NOTE:
Sleeves are sold and shipped separately to accommodate new construction and
replacement requirements.
Fits standard PTAC sleeves without the added expense of a bafe kit.
Quiet, efcient rotary
compressor mounted
on large vibration
isolators
Durable, powder coat
paint nish
The Quietest PTAC
You Can Buy*
2 | ZONEAIRE® SERIES PTAC
* Independent 3rd party Indoor Sound Power testing against leading competitive brands as tested May 2018.
ZONEAIRE® SELECT FEATURES
Energy Efficient & Energy Smart
Super-efcient refrigeration design with EERs
up to 12.0 and COP up to 3.55.
Exceptional FriedrichLink
®
energy
management thermostats available (wired &
wireless) with integrated occupancy sensor,
ve distinct energy presets and comprehensive
remote management capability.*
Energy efcient heat pump models available in
our complete line.
Electronic defrost control ensures more run
time in efcient heat pump mode.
Electronic temperature limiting to adjust low/
high temperature range limits for reduced
energy usage.
Slinger ring technology in condensate removal
system cools the coil and increases efciency.
Central desk control ready to allow hotel
owners to control units from a central location.
Comfort, Health & IAQ
Dehumidification removes up to 3.0 pints/hour
of moisture in cool mode to improve comfort
and reduce the chance of mold and mildew
growth.
Fresh air damper brings in fresh outside air
when desired.
Intuitive unit controls are user friendly with
easy-to-read LED display that can show either
set-point or actual room temperature as
selected by owner.
Anti-microbial air lters are easy to access and
washable.
Instant Heat heat pump mode quickly heats a
room to the desired temperature for increased
comfort.
Automatic periodic sampling of room
temperature every nine minutes to ensure
desired conditions are maintained.
Reversible indoor air louvers to easily
change direction of airow.
Ease of Maintenance &
Installation
Modular product design ensures easy access
to key components for cleaning and repairs,
including washable, lift-out air lters.
Remote thermostat pop-out wiring module
allows easier wiring and unit change out
without rewiring thermostat.
Surehold Front Cover System
®
securely
attaches the front each time..
May be installed ush with the oor.
Sound Reduction Features
Two permanently lubricated fan motors for
added durability and reduced sound levels
indoors.
Quiet, efcient rotary compressor mounted
with vibration isolators to keep the compressor
running smoothly and quietly.
High-density insulation and steel inner wall
block outdoor noise
Tangential blower wheel creates a wide path
air ow that reaches the furthest corner of the
guest room more quietly than conventional fans.
Warranty and Service
2 year full warranty on parts and labor and 5
year limited warranty.
Nationwide service network and U.S.-based
Friedrich expert technical team ensures you
get fast, knowledgeable service.
PARTS & LABOR
WARRANTY
See warranty documentation for full details.
LIMITED
WARRANTY
CAPACITY RANGE
Electric Heat
COOLING
6800-14500 Btu
Up to 12.0 EER
Heat Pump
COOLING
6800-14500 Btu
Up to 12.0 EER
REVERSE HEAT
6300-13600 Btu
Up to 3.55 COP
Large tangential
fan provides optimum
airow
Diamonblue
Advanced Corrosion
Protection
outdoor coils is
standard for added
protection against
rust in coastal areas
* Energy management capability requires purchase of additional hardware and activation fee.
Cooling Btu7200/68009600/9400920012000/118001200014500/14300
Cooling Watts600/565815/8008001050/103511301420/1400
Energy Efficient Ratio, EER12.011.8/11.811.511.4/11.410.610.2/10.2
Heater Size (kW)3.63.63.63.63.65.0
Moisture Removal (pints/hr.)0.71.21.62.13.23.0
Sensible Heat Ratio0.870.820.820.770.720.72
ELECTRICAL DATA:
Voltage(1 PHASE, 60 Hz)230/208230/208265230/208265230/208
Volt Range253-187253-187292-239253-187292-239253-187
Current (Amps)2.6/2.73.5/3.84.24.5/5.05.926.2/6.7
Power Factor0.99 0.99 0.990.96 0.990.99
Compressor LRA13.020.018.228.525.934.5
Compressor RLA2.53.33.05.34.36.4
Outdoor Fan Motor, HP0.07 0.07 0.10.07 0.10.09
AIRFLOW DATA:
Indoor CFM, HIGH335400400470470470
Indoor CFM, LOW250250290360360360
Vent CFM757575757575
PHYSICAL DATA:
Sleeve Dimensions (H x W x D)16” x 42” x 13 3/4” (ALL MODELS)
Dimensions with Front (H x W x D)16” x 42” x 21 1/2” (ALL MODELS)
Cut Out Dimensions (H x W x D)16 1/4”x 42 1/4” (ALL MODELS)
Net Weight (lbs.)104108113113115115
Shipping Weight (lbs.)126130136135137137
R-410A Charge (oz.)30.032.1 31.430.730.034.2
Dimensions with Packaging (inches)19” 3/4
Cooling Btu7200/68009600/9400920012000/118001200014500/14300
Cooling Watts600/565815/8008001050/103511301420/1400
Energy Efficient Ratio, EER12.0/12.011.8/11.811.511.4/11.410.610.2/10.2
Reverse Heating Btu6400/63008500/8200850011000/108001140013600/13200
Heating Watts530/520710/685710930/92010001180/1150
COP3.55/3.543.51/3.513.513.47/3.443.343.38/3.36
Moisture Removal (pints/hr.)0.71.21.62.13.23.0
Sensible Heat Ratio0.870.820.820.770.720.72
ELECTRICAL DATA:
Voltage(1 PHASE, 60 Hz)230/208230/208265230/208265230/208
Volt Range253-187253-187292-239253-187292-239253-187
Current (Amps)2.6/2.73.5/3.84.24.5/5.05.96.2/6.7
Reverse Heat. Amps2.3/2.53.0/3.32.74.0/4.43.85.1/5.5
Power Factor0.99 0.99 0.990.96 0.990.99
Compressor LRA13.020.018.228.525.934.5
Compressor RLA2.53.33.15.34.36.4
Outdoor Fan Motor, HP0.07 0.07 0.10.07 0.10.09
AIRFLOW DATA:
Indoor CFM, HIGH335400400470470470
Indoor CFM, LOW250250290360360360
Vent CFM757575757575
PHYSICAL DATA:
Sleeve Dimensions (H x W x D)
Dimensions with Front (H x W x D)
Cut Out Dimensions (H x W x D)
Net Weight (lbs.)105109113114115116
Shipping Weight (lbs.)127131136136137139
R-410A Charge (oz.)30.0 32.1 31.430.730.034.2
Dimensions with Packaging (inches)19” 3/4
Operating range 0°-115°F.
Due to continuing research in new energy-saving technology, specications are subject to change without notice.
Five-year warranty limited to installations in the United States, Puerto Rico, Mexico and Canada only.
See warranty documentation for full details.
16” x 42” x 13 3/4” (ALL MODELS)
16” x 42” x 21 1/2” (ALL MODELS)
16 1/4”x 42 1/4” (ALL MODELS)
x 43 1/2” x 23” (ALL MODELS)
4 | ZONEAIRE® SERIES PTAC
ZoneAire
®
Premier
Packaged Terminal Air Conditioners
Improved performance and design enhancements combine to deliver
our most efficient and reliable standard PTAC
Advanced design for greater
energy efficiency
• EERs up to 13.0 reduces operating
costs versus lower efciency
models
• Curved coil design of the Premier
Series maximizes the internal
surface area to deliver higher
efciencies
Dependable performance
begins with the highest
quality materials and
components
• Stainless steel endplates on
the coils for better corrosion
resistance
• Galvanized, zinc-coated steel
wall sleeves brought together with
durable construction and rigorous
testing
Engineered for maximum
guest comfort
• Tangential fan provides quiet,
yet powerful airflow that quickly
reaches all corners of the room
• Two motor design for quieter
indoor sound levels
• Thick insulation on the inner
walls reduce sound transfer into
the room
• Constant Fan mode produces a
steady stream of white noise in
both cooling and heating modes
that masks sound level changes
when the compressor cycles on
and off, and also masks outdoor
noise.
PARTS & LABOR
WARRANTY
Friedrich reliability is backed by an
industry-leading 2-year parts and labor
and 5-year limited warranty.
LIMITED
WARRANTY
See warranty documentation for full details.
Our Most Efficient
and Reliable
Standard PTAC
5
ZONEAIRE® PREMIER PTAC
Designed to deliver quiet, energy-efcient operation and dependable
performance backed by an exceptional warranty
ZoneAire Premier features
advanced coil design to deliver
exceptional energy efficiency
The curved coil design of the
Premier Series maximizes the
internal surface area to deliver
higher efciencies
Key components can be easily
accessed by your maintenance team
so units can be removed, serviced
and placed back in service faster.
Friedrich PTACs utilize a modular design that provides
easy access to key components for maintenance or
service
Indoor coil frost sensor
Reversible louvers for
air path modications
Easy-access,
interchangeable
antimicrobial air
lters (2)
protects compressor
Quiet, efcient rotary
compressor mounted on large
vibration isolators
Durable, powder coat
paint nish
Outdoor curved coil is
coated with Diamonblue
Advanced Corrosion
Protection
CAPACITY RANGE
Electric Heat
COOLING
7000-15000 Btu
EERs up to 13.0
ELECTRIC HEAT
8300-17000 Btu
EERs up to 13.0
®
Heat Pump
COOLING
7000-15000 Btu
EERs up to 13.0
REVERSE HEATING
6000-13300 Btu
Up to 3.6 COP
AUXILIARY ELECTRIC HEAT
8300-17000 Btu
Easy to read and use digital controls
Receptacles and Fuse Types
Voltage230V265V
Amps
Heater Size
Receptacles
NEMA#
Receptacle
NEMA#
Plug
Large tangential fan provides smooth,
powerful airow
Break-proof control door design maintains the integrity of the unit.
Indoor coil frost sensor protects the compressor to lengthen the
life of the unit.
Diamonblue Advanced Corrosion Protection
outdoor coil from harsh environments.
®
protects the
Warranty and Support
Industry leading warranty features 2-year full warranty on parts
and labor and 5-year limited warranty.
Nationwide service network and U.S. based Friedrich expert
technical team ensures you get fast, knowledgeable service.
Energy Efficient & Energy Smart
Super-efcient refrigeration design with EERs up to 13.0 and
COP up to 3.6.
Exceptional FriedrichLink
available (wired & wireless) with integrated occupancy
sensor, ve distinct energy presets and comprehensive remote
management capability.*
Advanced coil design adds more sur face area leading to
higher efficiencies.
Thicker steel inner-wall and foam construction decreases
thermal transfer and energy loss.
Energy efcient heat pump models available in our complete line.
Electronic defrost control ensures more run time in efcient
heat pump mode.
Electronic temperature limiting to adjust low/high temperature
range limits for reduced energy usage.
Slinger ring technology in condensate removal system cools the
coil and increases efciency.
Desk control ready to allow hotel owners to control units from a
central location.
®
energy management thermostats
Sound Reduction Technology
Two permanently lubricated fan motors for added durability
and reduced sound levels indoors.
Quiet, efcient rotary compressor mounted with vibration
isolators to keep the compressor running smoothly and quietly.
High-density insulation and steel inner wall block outdoor noise.
Tangential blower wheel creates a wide path air ow that
reaches the furthest corner of the guest room more quietly than
conventional fans.
Comfort, Health & IAQ
Dehumidication removes up to 3.1 pints/hour of moisture in
cool mode to improve comfort and reduce the chance of mold and
mildew growth.
Constant Fan mode provides continuous fan operation in cooling
or heating modes to create a steady stream of white noise that
masks sound level changes when the compressor cycles on/off.
Fresh air damper brings in fresh outside air when desired.
Intuitive unit controls are user friendly with easy-to-read
LED display that can show either set-point or actual room
temperature as selected by owner.
Anti-microbial air lters are easy to access and washable.
Instant Heat on heat pump models quickly heats a room to the
desired temperature for increased comfort.
Even-heat monitoring checks room temperature and
automatically adds heat boost if necessary.
Automatic periodic sampling of room temperature to ensure
desired conditions are maintained.
Reversible indoor air louvers to easily change direction
of airow.
Ease of Maintenance & Installation
Modular product design ensures easy access to key components
for cleaning and repairs; including washable, lift-out air lters.
Remote thermostat pop-out wiring module
allows easier wiring and unit change out
without rewiring thermostat.
Standard heat output power cord comes
attached to the unit.
Compact front is designed to preserve
indoor oor space with a depth of 7¾ inches.
Surehold Front Cover System
attaches the front each time.
Inner wall service plate provides service
access to tangential blower bearing without
having to open up the entire inner wall.
Unit may be installed ush with the oor.
®
securely
* Energy management capability requires purchase of additional hardware and activation fee.
Sleeve Dimensions (H x W x D)16” x 42” x 13 3/4” (all models)
Dimensions with Front (H x W x D)16”x 42”x 21 1/2” (all models)
Cut Out Dimensions (H x W x D)16 1/4”x 42 1/4” (all models)
Net Weight (lbs.)113112119119122119124122
Shipping Weight (lbs.)133132139139141139144144
R-410A CHARGE (oz.)343434343636
Dimensions with Packaging (inches)17 7/8" x 45" x 25 1/4" (all models)
Models ending in 'K' are 230/208V, models ending in 'R' are 265V
Models ending in 'K' are 230/208V, models ending in 'R' are 265V
3939
Due to continuing research in new energy-saving technology, specications are subject to change without notice.
Warranty limited to installations in the United States, Puerto Rico, Mexico and Canada only.
See warranty documentation for full details.
8 | ZONEAIRE® SERIES PTAC
ULCDTP
FreshAire®
Packaged Terminal Air Conditioners
The most advanced PTAC ever. Delivers the best STC ratings*
in the industry of units with true make-up air capability.
FreshAire system helps achieve ASHRAE 62.1-2013 requirements, and brings up to 52 CFM of
conditioned, MERV 8 ltered, outside air into the space.
Patents-pending technology uses the
inverter compressor and main cooling
system to optimize temperature and
humidity level of incoming air.
By introducing make-up air directly
into the guestroom, rooftop central
fresh air systems can be considerably
downsized to service only the common
areas of the property.
This greatly reduces the cost and complexity of hotel design and construction. Unlike other PTACs, the FreshAire
PTAC utilizes the main evaporator coil
and Merv 8 filters to truly condition
and filter the outside ventilation air.
Make-up air passes
through Merv 8
lter, then mixes
with return air.
Return air
Friedrich's proprietary Freshaire™ design and delivery system is protected under US Patent#10.436.457
*With makeup air active (door open)
The widest cooling & heating range
in the industry with only two models
Variable speed technology gives you the exibility of a full
line of PTACs with only two models, and offers the highest
available capacity of any 42x16 PTAC on the market at
over 17000 Btus.
The Friedrich Inverter variable speed compressor matches
the unit output to the actual demand of the space for
increased comfort and lower energy consumption.
• The 9000 Btu MODEL can operate as low as 6462
Btus and as high as 12099 Btus.
• The 12000 Btu MODEL can operate as low as 7929
Btus and as high as 17142 Btus.
That's like getting multiple PTACs in one.
FRESHAIRE OPERATING BTU RANGE
12099
FreshAire PTAC
9000 Btu model
Up to 12.9 EER
6462
17142
FreshAire PTAC
12000 Btu model
Up to 12.3 EER
7929
MAX. Btu
MIN. Btu
MAX. Btu
MIN. Btu
9
FRESHAIRE® PTAC
FreshAire PTAC delivers best-in-class efficiencies and low sound levels.
FreshAire units with
inverter compressors
deliver equivalent SEERs
up to 15.0; application
HSPFs up to 11.57, and
offer many advantages
over traditional PTACs.
• Improved dehumidification
• Quieter start-up and operation
• Better efficiency during part load
hours of cooling & heating
• Reduced temperature swings
improve guest comfort
TRADITIONAL PTACFRESHAIRE INVERTER PTAC
At initial start up, a fixed
capacity system slowly reaches
the set temperature.
Complete shutdown once set
temperature is achieved.
Temperature within the space
rises until 2nd system start up.
System works at full capacity to
again reach the set temperature.
System cycles on and off
continually to maintain the set
temperature.
FASTER TO SETPOINT
At initial start up, utilizes variable
capacity to quickly reach the set
temperature.
MAXIMUM ENERGY SAVINGS
Reduces capacity as set temperature is achieved.
MAINTAINS PRECISE COMFORT
Variable capacity maintains set
temperature keeping space
comfortable with reduced energy
consumption.
Variable capacity operation provides improved humidity control
in the guestroom.
Soft-start technology provides the smoothest PTAC sound available
The variable-speed operation of the FreshAire PTAC allows the unit to work at the optimal speed to match the
true load of the room. This not only provides the best energy consumption curve it also adds to guest comfort by
eliminating the harsh start-ups associated with single speed compressors.
THE CURVES BELOW ILLUSTRATE THE DIFFERENT SOUND CHARACTERISTICS OF A SINGLE-SPEED PTAC VERSUS A
FRESHAIRE MODEL PTAC.
SOUND PERFORMANCE OVER TIME
Sound Level
10 | FRESHAIRE® SERIES PTAC
Time
Traditional
Single speed
Fresh air PTAC
Friedrich
FreshAire PTAC
Innovative design and quality components deliver unmatched performance
The FreshAire PTAC inverter compressor provides superior energy efficiency
FreshAire PTAC components
can be easily accessed by your
maintenance team so units can be
removed, serviced and placed back
in service faster.
Commercial grade components
provide reliable performance in even
the most extreme climates.
Outdoor coil has
Diamonblue Advanced
Corrosion Protection
and aluminum endplates
®
2-speed make up air fan
Reversible louvers for
air path modications
Easy-access,
interchangeable
antimicrobial air
lters
Fully-integrated
and patents-pending
FreshAire system
RS-485 plug reduces
electronic communication
interference
Indoor coil frost sensor
protects compressor
Durable, powder coat
paint nish
Variable speed inverter
compressor for high efciency.
Robust insulation keeps sound
out of the guestroom.
IMPORTANT NOTE: Sleeves are sold and shipped separately to accommodate new construction and
replacement requirements.Fits other PTAC sleeves without the added expense of a bafe kit.
FRESHAIRE EXTENDED CAPACITY RANGE
230/208V Fresh Air Inverter
COOLING
PVH09K
STANDARD RATING 9600/9400 Btu
EXTENDED RATING 6,462 - 12099 Btu
PVH12K
STANDARD RATING 12000/11800 Btu
EXTENDED RATING 7,929 - 17142 Btu
Up to 12.9 EER
Up to 15.0 Equivalent SEER
HEAT PUMP
PVH09K
STANDARD RATING 8200/8500 Btu
EXTENDED RATING 5606 - 11745 Btu
PVH12K
STANDARD RATING 11600/11800 Btu
EXTENDED RATING 6995 - 16187 Btu
Up to 11.57 Application HSPF
265V Fresh Air Inverter
COOLING
PVH09R
STANDARD RATING 9600 Btu
EXTENDED RATING 6,462 - 12099 Btu
PVH12R
STANDARD RATING 12000 Btu
EXTENDED RATING 7,929 - 17142 Btu
Up to 12.0 EER
HEAT PUMP
PVH09R
STANDARD RATING 8500 Btu
EXTENDED RATING 5606 - 11745 Btu
PVH12R
STANDARD RATING 11800 Btu
EXTENDED RATING 6995 - 16187 Btu
Up to 3.57 COP
BACK UP ELECTRIC HEAT
2.5 kw, 3.5 kw and 5.0 kw*
heater options
*5.0 kw heater cannot be used
on PV09K/PV09R
11
FRESHAIRE® FEATURES
FreshAire System
Dedicated 2-speed fan delivers up to 52 CFM of outside air into
the room.
Merv 8 lter is washable and replaceable.
Does not rely on separate refrigeration system like competitor’s
units.
Durable Construction
Aluminum endplates reduce outdoor coil corrosion.
Galvanized zinc coated steel wall sleeve and steel base pan
undergo an 11-step preparation process, are powder coated with a
polyester nish and cured in an oven for exceptional durability.
RS-485 communication plug, enables a better balanced
communication signal which allows the FreshAire PTAC to
communicate fully with the VRPXEMRT 12V controller allowing
full variable control of the inverter compressor and brings access
to our feature rich energy management suite of options including
room occupancy.
Factory run-tested units reduce problems in the eld.
Internal diagnostic program can alert maintenance to component
failures or operating problems. Fourteen numeric service error
codes stored in memory facilitate rapid unit diagnostics.
Easy access anti-microbial lters simplify maintenance and
extend the life of the product.
Room freeze protection initiates heat if temperature falls to 50°F
in an unoccupied room.
Random compressor restart protects electrical systems from
overload when power is restored.
Tamper-resistant, anodized stamped aluminum grille withstands
chalking and oxidation.
Break proof control door design maintains the integrity of the unit.
Indoor coil frost sensor protects the compressor to lengthen the
life of the unit.
DiamonBlue Advanced Corrosion Protection
all PTACs for long life in harsh coastal environments. See note on
the next page regarding coastal installation of FreshAire PTACs in
coastal regions.
®
comes standard on
Comfort, Health & IAQ
Dehumidificationremoves moisture in cool mode to improve comfort
and reduce the chance of mold and mildew growth.
Integrated Fresh air manifold effectively conditions outside air and
meets ASHRAE 62.1 standard for IAQ
Intuitive unit controls are user friendly with easy-to-read LED
display that can show either set-point or actual room temperature as
selected by owner.
Anti-microbial air lters are easy to access and washable.
Instant Heat heat pump mode quickly heats a room to the desired
temperature for increased comfort.
Automatic periodic sampling of room temperature to ensure desired
conditions are maintained.
Reversible indoor air louvers to easily change direction of
airow.
Sound Reduction Features
Two permanently lubricated fan motors for added durability and
reduced sound levels indoors.
Quiet, efcient inverter compressor mounted with vibration isolators
to keep the compressor running smoothly and quietly.
High-density insulation and steel inner wall block outdoor noise
Tangential blower wheel creates a wide path air ow that reaches the
furthest corner of the guest room more quietly than conventional fans.
Ease of Maintenance & Installation
Modular product design ensures easy access to key components for
cleaning and repairs, including washable, lift-out air lters.
Surehold Front Cover System
®
securely attaches the front each time.
May be installed low on the oor.
Warranty and Service
2 year full warranty on parts and labor and 5 year limited warranty.
Nationwide service network and U.S.-based Friedrich expert
technical team ensures you get fast, knowledgeable service.
Energy Efficient & Energy Smart
Variable speed Inverter compressor delivers EERs up to 12.9
at part load conditions (9000 Btu model operating at 6462 Btu).
Exceptional FriedrichLink
available (wired & wireless) with integrated occupancy
sensor, ve distinct energy presets and comprehensive remote
management capability.*
Energy efcient heat pump models available in our complete line.
Electronic defrost control ensures more run time in efcient heat
pump mode.
Electronic temperature limiting to adjust low/high temperature
range limits for reduced energy usage.
Slinger ring technology in condensate removal system cools the
coil and increases efciency.
Central desk control ready to allow hotel owners to control units
from a central location.
12 | FRESHAIRE® SERIES PTAC
®
energy management thermostats
PARTS & LABOR
WARRANTY
See warranty documentation for full details.
* Energy management capability requires purchase of additional hardware
and activation fee.
¹ Data for Model PVH09R
PXPCFA23020A comes standard on PTAC
Warning: Coastal Region Installations.
Friedrich Air Conditioning recommends that owners take necessary precautions to protect the interior space, furnishings, and hardware from corrosion when installing make-up air products in coastal applications. Our FreshAire PTAC delivers up to 52 CFM of direct outside make-up air into the space. If installed within 2 miles of
a body of salt water, due to the high salt content of coastal air and the high latent load of the make-up air, premature corrosion will occur naturally on non-protected
items. Friedrich Air Conditioning is not responsible for premature corrosion resulting from the use of make-up air products.
Due to continuing research in new energy-saving technology, specications are subject to change without notice. Warranty limited to installations in the United
States, Puerto Rico, Mexico and Canada only. See warranty documentation for full details.
13
FRIEDRICH PTAC OPTIONAL ACCESSORIES
WALL SLEEVE PDXWSA
Galvanized steel is prepared in a multi-step process for stronger paint adhesion,
then powder coated with a polyester finish and cured in an oven for exceptional
durability. The wall sleeve is insulated for thermal efciency and noise reduction.
SLEE VE DIMENSIONS: 16" H x 42" W x 13 3/4" D
CUT OUT DIMENSIONS: 16 1/4" H x 42 1/4" W
FRONT COVER DIMENSIONS: 16" H x 42" W x 7 3/4" D
DEEP WALL SLEEVES
PDXWSEXT18 PDXWSEX T24
For walls up to 17
PDXWSEX T (Custom depth wall sleeve)
One-piece, extended wall sleeve with built-in bafe for walls from 13 1/4" to 25 1/2"
deep are available by special order.
SLEEVE EXTENSION RETROFIT KIT PXSE
1
/4" sleeve extension attached to the room side of the sleeve to allow for the
2
installation of a PD-series Friedrich PTAC in an 11 1/2" deep T-series sleeve.
INTELLIGENT WALL CONTROLLER* (PREFERRED FRESHAIRE MODEL CONTROLS)
VRPXEMRT2
Wired thermostat with occupancy sensor designed for FreshAire control.
Built-in RH control to maximize FreshAire capabilities. Used with EMOCT for HVAC
energy management
EMWRT2
Wired thermostat with occupancy sensor. Built in RH control to maximize FreshAire
capabilities. Used with EMOCT for HVAC energy management
24v, Wired (7 Std), single stage, wall-mounted, 7-day programmable thermostat,
three fan speeds (auto/low/high), and an easy-to-read large backlight display.
RT7
24v, Wired (7 Std), non-programmable, wall-mounted thermostat (unit powered
capable). three fan speeds (auto/low/high), and an easy-to-read backlight display.
WRT2
Wireless wall-mounted thermostat (battery powered). Wireless transmitter (24v),
7-day programmable, three fan speeds (auto/low/high), and an easy to read large
backlight display.
1
/2” deep. For walls up to 23 1/2” deep.
PDXWSA
Deep wall sleeve extension PDXWSEXT18 shown with
weather panel in place
PXSE
EMWRT2, EMRT2, VRPXEMRT2 EMOCT
PFAXWC1 RT7P
®
FRIEDRICHLINK
ENERGY MANAGEMENT THERMOSTATS
EMRT2 EMWRT2
Wired thermostat with occupancy sensor. Wireless thermostat with occupancy sensor.
RT7 WRT2
EMOCT EMRAF
Online connection kit for Energy Management Remote access fee.
EMRHCF
Remote humidity control fee.
REMOTE THERMOSTAT ESCUTCHEON KIT PDXRTB
Kit contains escutcheons that can be placed over the factor y control buttons
(recommended when a remote wall mounted thermostat is used as controls become
inoperable). The escutcheon directs the user to the wall thermostat for operation and
retains the LED window to display error codes and diagnostic information. 10 pack.
CONDUIT KIT /JUNCTION BOX PXCJA
Hard wire conduit kit with junction box for 208/230V and 265V units (subbase not
required). Kit includes a means of quick disconnect for easy removal of the chassis.
*NOTE: The FreshAire PTAC must be paired with wall controller VRPXEMRT2 or PFAXWC1 to operate as a fully variable speed unit.
When used with other compatible thermostats, the unit will operate at multiple speeds in either cooling or heating mode.
14 | FRIEDRICH PTACs
PDXRTB
PXCJA
FRIEDRICH PTAC OPTIONAL ACCESSORIES
STANDARD GRILLE PXGA
Standard, stamped, anodized aluminum to resist chalking and oxidation.
ARCHITECTURAL GRILLES
Architectural grilles consist of heavy gauge 6063-T5 aluminum alloy.
PX AA Clear extruded aluminum.
PXBG Beige acrylic enamel.
PX SC Available in custom colors.
DECORATIVE SUBBASE (black) PXSBA
Provides unit suppor t for walls less than six inches thick. Includes leveling legs,
side ller panels and mounting brackets for electrical accessories. Accepts
circuit breaker, power disconnect switch and conduit kit.
ELECTRICAL SUBBASE
Provides unit suppor t for walls less than six
inches thick. Includes leveling legs, side
ller panels, mounting brackets, a plug-in
receptacle and eld-wiring access. The subbase also includes electrical knockouts for
power disconnect switch or circuit breaker.
Attaches to the bottom of the wall sleeve for internal draining of condensate, or
to the rear wall sleeve ange for external draining. Recommended for all units to
remove excess condensate. 10 pack.
LATER AL DUCT ADAPTER PDXDAA
Attaches to the Friedrich PTAC/PTHP unit to direct up to 35% of the total airow
to a second room. The unit-mounted duct plenum features a front-mounted
aluminum grille that has two positions to provide the most optimal air direction.
The air may be directed to either the left or the right of the unit through the sup-
1
/2" H x 7" W x 47" L plenum. Plenum may be cut to length by the installer.
plied 3
Kit includes duct plenum, front grille, 47" duct extension, duct discharge grille,
duct end cap and all necessar y mounting hardware.
PXSB
PXDS
PXFTA PXFTB
PXFAFT10
PXDR10
LATER AL DUCT EXTENSION PDXDEA
1
Additional 3
/2" H x 7" W x 47" L plenum used with the LATERAL DUCT
ADAPTER. A maximum of three duct extensions may be used together.
Note: Ducted air ow is reduced as duct length is increased.
PDXDAA and PDXDEA ship together
15
Save big on energy without compromising
®
guest comfort with FriedrichLink
thermostats,
the advanced energy management solution for
®
Friedrich ZoneAire
and FreshAire® PTACs
Real Time Motion and Thermal Occupancy Sensor
Integrated Occupancy Sensor uses a combination of motion and thermal
sensing technologies for accurate occupancy detection at all times-no need
to install additional devices such as door switches or sensors.
Wired or Wireless Installation
Wired or wireless connectivity with extensive conguration options deliver
full compatibility and easy integration with virtually any packaged HVAC
system.
5 Energy Savings Presets
5 distinct energy saving modes make it easy to choose
the optimal energy saving settings for any property.
Remote Management*
Web-based remote management provides expansive
solutions for remote monitoring and conguration from any computer
connected to the Internet.
Built-in Wireless Networking enables remote management without using
or interfering with property’s existing wireless infrastructure. True mesh
networking eliminates the need for additional networking equipment such
as signal repeaters or multiple data collection boxes.
Friedrich’s EMRT2, EMWRT2 and
VRPXEMRT2 thermostats use real-time
motion and thermal occupancy detection to
save energy.
When the room is unoccupied, the
thermostat automatically adjusts the
temperature to eliminate unnecessary
heating and cooling.
Monitor room status and see the operation,
occupancy and energy efciency status of
each room.
* Requires an optional “Online Connection
Kit” and a one-time license fee. Optional
Humidity Control Feature available through
Remote Management.
See accessories on page.14.
Advanced Energy Saving Features
Fully congurable energy
saving modes maximize
energy savings without
compromising guest comfort.
Temperature setback
automatically adjusts the
temperature when the room
is unoccupied in order to save
energy.
Temperature recovery
calculates the setback
temperature so that the
desired temperature can be
restored within specied time.
Friedrich Air Conditioning Co. l 10001 Reunion Place, Suite 500 l San Antonio, TX 78216 l 877.599.5665 www.friedrich.com
BR_PTAC_1-09-20 Printed in USA
Setback optimization continu-
ously monitors temperature
recovery rate in the room and
adjusts setback temperature to
maximize energy savings.
Setback limits allow
maximum and minimum room
temperature to be set when
the room is unoccupied.
Set point limits prevent
guests from setting room
temperature to extreme,
energy-wasting levels.
Room status displays
operation, occupancy and
energy efciency status of
each room.
Room detail displays
temperature and occupancy
changes in a room.
Energy reports monitor
energy use and can even
evaluate the performance of
energy saving features.
Intuitive interface makes it
easy to apply different settings
to different rooms.
User management allows
conguration of custom
access permissions and
alert notication settings for
different users.
Built-in diagnostic tools
automatically send email alert
notications to hotel staff.
FriedrichLink® For Lodging
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.