Friedrich PDH07R3SG, PDH09R3SG, PDH12R3SG, PDE07R3SG, PDE09R3SG Accessories

...

ACCESSORIES

New Construction Accessories

PDXW SA

PDX WS EX T18

PDXW SEXT24

PDXW SEXT

PXSE

WALL SLEEVE Galvanized zinc coated steel is prepared in an 11-step

process, then powder coated with a polyester nish and cured in an oven for exceptional durability. The wall sleeve is insulated for sound absorption and thermal efciency, 16" High x 42" Wide x 13 3/4" Deep.

DEEP WALL SLEEVE For walls up to 17 1/2" deep.

DEEP WALL SLEEVE For walls up to 23 1/2" deep.

CUSTOM DEEP WALL SLEEVE One piece extended wall sleeve for walls

from 13

/4" to 25 1/2" deep are available by special order.

Deep wall sleeve PDXWSE XT18 shown with weather panel

SLEE VE EXTENSION RETROFIT KIT Galvanized zinc coated steel, 2 sleeve extension attached to the room side of the sleeve to allow for the installation of a PD-Series Friedrich PTAC in a T-Series sleeve.

PXGA GRILLE Standard, stamped aluminium, anodized to resist chalking and

oxidation.

PXA A PXBG PXSC

ARC HITE CTUR AL G RIL LES Cons is t of he a v y- g auge 6063-T 5 alumi nu m alloy: 42" W x 16" H x 1

/8" D

PXAA – Clear, extruded aluminum PXBG – Beige acrylic enamel PXSC – Also available in custom colors.

PDXWSA

/8"

PXGA

PXDR10 CONDENSATE DRAIN KIT Attaches to the bottom of the wall sleeve for

inter nal drainin g of cond ensate or to the rea r wall sleeve an ge for external draining. Recommended on all units to remove excess condensate. Packaged in quantities of ten.

PXCJA CONDUIT KIT WITH JUNCTION BOX Hard wire conduit kit with junctio n

box for 208/230V and 265V units (subbase not required). Kit includes a means of quick disconnect for easy removal of the chassis. *Required for 265V installations.

PXFTA REPLACEMENT FILTER PACK These are original equipment return air

lters. They are reusable and can be cleaned by vacuuming, washing, or blowing out, and are sold in convenient ten-p acks. (Two lters per chassis).

PXPD230/

POWER FRESH AIR DOOR KIT

PXPD265

PXPV230/

POWER FRESH AIR VENT KIT

PXPV265

PXA A

PXPD*/PXPV

*Fan not included in PXPD.

PXDS SUBBASE DISCONNECT SWITCH

ACCESSORIES

New Construction Accessories

PDXDA A LATERAL DUCT ADAPTER Attaches to the Friedrich PTAC/PTHP unit to di-

PDXDE A

PXSBA DECORATI VE SUBBASE P ro vides unit suppor t fo r walls less than six inch es

PXSB ELECTRICAL SUBBA SE Provides unit support for walls less than six inches

rect up to 35% of the total airow to a second room. The unit-mounted duct plenum features a front-mounted aluminum grille that has t wo positions to provide the most optimal air direction. The air may be directed to either the left or the right of the unit through the supplied 3 1/2 H" x 7 W" x 47" L plenum. Plenum may be cut to length by the installer. Kit includes duct plenum, front grille, 47" duct extension, duct discharge grille, duct end cap and all necessar y mounting hardware.

LATERAL DUCT EX TENSION Additional 3 use with the LATERAL DUCT ADAPTER. A maximum of 3 duct extensions total may be used. Note: Ducted airow is reduced as duct length is increased.

thick. Includes leveling legs, side filler panels and mounting brackets fo r elec tr ical acc es sories. Accepts circuit breaker, power disconnect switch, or conduit kit.

thick. Includes leveling legs, side ller panels, mounting brackets , a pl ug in receptacle and field-wiring access. The subbase also includes electrical knockouts for a power disconnect switch or circuit breaker.

PXSB23020 Electrical Subbase - 230V 20A PXSB23030 Electrical Subbase - 230V 30A PXSB26515 Electrical Subbase - 265V 15A PXSB26520 Electrical Subbase - 265V 20A PXSB26530 Electrical Subbase - 265V 30A

/2 H" x 7" W x 47" L plenum for

RT6 DIGITAL REMOTE THERMOSTAT Single stage cool, single stage heat for

WRT1 WIRELESS DIGITAL REMOTE THERMOSTAT Single stage cool, single stage

PDX RTA REMOTE THERMOSTAT ESCUTCHEON KIT This kit contains ten escutch-

EMRT1

EMWRT1

PDE models or single stage cool, dual stage heat for PDH model thermostat features high/low fan speed switch. Thermostat is hard wired and can be batter y powered or unit powered. Features backlit display and multiple conguration modes. For use on PD Series Friedrich PTACs and Vert-I-Paks.

heat for PDE models or single stage cool, dual stage heat for PDH model thermostat features high/low fan speed switch. Thermostat is wireless and is battery powered. Features backlit display and multiple conguration modes. For use on PD Series Friedrich PTACs and Vert-I-Paks.

eons th at can be placed over the factor y control buttons when a remote wall mounted thermostat is used. The escutcheon directs the guest to the wall thermostat for oper ation and retains the LED window to display error codes and diagnostic information.

ENERGY MANAGEMENT THERMOSTATS

EMRT1

Wired thermostat with occupancy sensor.

EMWRT1

Wireless thermostat with occupancy sensor.

EMOCT EMRAF EMRHCF

Online connection kit. Remote access fee. Remote humidity control fee.

BRO_INSERT_ZAPTAC_COMM_2016