Friedrich MC18Y3JM, MC12Y3JM Brochure

Page 1
PRELIMINARY
DUCTLESS
SPLIT SYSTEMS
ALL NEW LINE
FOR 2014
THE EXPERTS IN ROOM AIR CONDITIONING
Page 2
NEW, High Efficiency
Line of Ductless Systems
Three indoor unit types.
R
E
I
O
P
U
S
R
25.0 SEER
E
F
F
I
Y
C
N
C
E
I
efciencies
ever.
Up to 25.0 SEER
Protects the outdoor coil against deterioration and extends the life of the unit especially in harsh coastal environments.
WALL-MOUNTED
Cool only and heat pump models
All of the advantages of ductless systems and Friedrich quality.
ENERGY STAR® qualified models
All Friedrich ductless models exceed the federal 13.0 SEER requirements. And 60% of our models have ratings ranging from 19.0 to 25.0 SEER. Nine models are ENERGY STAR up to 14.0.
®
qualied with EERs
Inverter variable capacity advantages
Inverter technology allows each system
to adjust capacity and cooling output to provide only the amount of cooling needed at a given time. For example,
an 18000 Btu system will operate even more efciently at 15500 Btu or less if
that's all that’s needed, reducing energy consumption and improving comfort.
Ultra quiet cross-flow fan
The cross-ow design of the indoor fan creates an ultra quiet, yet powerful air ow into the room.
Optimized airflow
The indoor unit's 4-way air swing quickly
disperses cool air to all four corners of the room to provide comfort throughout
the room within a few minutes. The
'Air Burst' feature moves air at an even higher speed for rapid cooling.
Low vibration, twin rotary compressors
Friedrich's twin rotary compressors
have a unique design that reduces vibration for reduced sound levels outdoors.
Zero duct loss
The DOE reports that ducted systems lose an average of 25-40% in
performance due to leaks, cracks or disconnections in ductwork. No ductwork means that ductless
systems do not experience duct loss, saving energy and money.
Zone cooling flexibility
Independently condition up to (4) separate zones using only a single outdoor unit. Achieve the ultimate in comfort and energy control by cooling or heating only the zones that are in use. And, because each zone is independent of the others, comfort settings can vary.
No dirty air ducts*
Now there’s no need to clean dirty air
ducts that can harbor dust, germs and
allergens that are eventually blown into your home or ofce.
CEILING CASSETTE
Heat pumps
CONCEALED DUCT
Heat pumps
Inverter technology lets you reach the desired temperature faster, maintain temperature and humidity levels more accurately, and reduce energy costs.
Inverter technology varies the compressor, the outdoor and the indoor fan speeds, eliminating constant
compressor start-ups/shut-downs that
traditional systems require to maintain the set temperature.
This is especially beneficial in multizone
systems where room temperature set
points vary and some indoor units may be turned off in unoccupied rooms.
Each system can adjust capacity and cooling output to provide only the amount of cooling needed at a given time.
The result is optimal comfort with low
energy costs.
The Advantages of Friedrich Inverter Systems
TRADITIONAL SYSTEM INVERTER SYSTEM
At initial star t up, fixed capacity
system slowly reaches the set
temperature.
Complete shutdown once set
temperature is achieved.
Temperature within the space
rises until 2nd system start up.
System works at full capacity to
again reach set temperature.
System cycles on and off continually to maintain the set temperature.
At initial start up, utilizes
variable capacity to quickly
reach the set temperature.
Reduces capacity as set temperature is achieved.
Variable capacity maintains
set temperature keeping space comfortable with reduced
energy consumption.
*Ductless wall-mounted and ceiling cassette models
2
3
Page 3
70
°
72
°
74
°
OFF
Attractive and high efficiency options for cooling and heating residential and light commercial spaces.
131
MULTIZONE
COMBINATIONS
Wall-mounted models mount
high on the wall.
The attractive,
neutral nish blends well with
just about any decor.
Indoor units can be used individually or as part of a multizone system to condition multiple spaces or a large area.
Residential Applications
• Room additions/renovations
• Homes without ductwork
• Bedrooms and family rooms
• Garage workshops
• Sunrooms
• Guest quarters
• Wine cellars
Commercial Applications
• Hotels and other lodging
• Computer rooms/server rooms
• Restaurant kitchen and prep areas
• Ofces in warehouse spaces
• Storage facilities
• Buildings where security concerns
prevent the use
of window units
• Internal areas without exterior wall access
Zone Cooling and Heating
Occupants have the ability to set the temperature to their preferred comfort level. And, you can turn off units in unoccupied rooms.
That’s the beauty– and efciency of
a Friedrich multizone system.
Enjoy the exibility
to mix and match
wall-mounted,
ceiling cassette and concealed duct
systems to t your
application.
4
5
Page 4
Features you'll find with Friedrich Ductless Systems:
EASE OF INSTALLATION
Wall-mounted
System Type
Installation Wall Wall Ceiling Ceiling Ceiling Ceiling
Cool only Y N N N N N
Heat pump Y Y Y Y Y Y
115 volt models Y N N N N N
Inverter compressor Y Y Y Y Y Y
SEER Up to 25.0 Up to 21.7 Up to 19 Up to 16.5 Up to 17.6 Up to 16.5
Auto changeover Y N Y N Y N
Low ambient operation* Y Y Y Y Y Y
Programmable timer 24- h r. 24- h r. 24 -hr. 24-hr. 2 4 - h r. N
Remote control Y Y Y Y N N
Wall controller option Y Y Y Y Y Y
Auto restart when power is
interrupted
Continuous ‘Air Sweep” Y Y Y Y N N
Washable, antimicrobial air filters Y Y Y Y Y Y
Single Zone
Y Y Y Y Y Y
Wall-mounted
Multizone
Cassette
Single Zone
Cassette
Multizone
Concealed Duct
Single Zone
Concealed Duct
Multizone
New ductless line with convenient installation features that will get your ductless running in no time.
UNIQUE MOUNTING BRACKET
A SET OF
16 INCH ON CENTER HOLES
16" on Center
The hanging bracket comes with a set of holes that are placed 16” apart from each other to help you attach the bracket securely to "16 on center" wall studs.
Level-Line Ledges
Incorporated “Level-Line Ledges” ensure a straight wall mount and frees both hands for
an easy single-person installation.
Tape Measure Assist
The integrated “blade grip” securely keeps measuring tape in place. The ”blade grip” gives you a helping hand when installing the bracket to the wall.
Auto shut flaps when unit is off Y Y Y Y N N
Louver Position (Fan/Cool/Heat) 6 / 6 / 6 6 / 6 / 6 4 / 5 / 4 4 / 5 / 4 N N
Powerful airflow for faster heating and cooling.
Optimum air flow
Air is directed downward in heating mode and angled upward during cooling mode so the
room feels more comfortable, faster.
Large fans
Powerful fans move the air across the room­up to 39 feet away. That means faster cooling
and heating and you feel comfortable sooner
no matter where you are in the room.
Wall Standoff Bracket
The clip keeps sufcient space between the unit and the wall creating more room for installation.
Spacious Tubing Area
Ample space was created to facilitate tubing
installation and placement.
Low Installation Access Panel
By lowering the access panel to eye-level we
have created a hassle-free access to electrical connections.
Secure Grip Screws
"Grip Screws" rmly secure wall-mounted unit to wall bracket providing a stable setup.
6
7
Page 5
Single Zone
PRELIMINARY SPECIFICATIONS
WALL-MOUNTED COOL ONLY
9000-24000 Btu. Cool only models with features for convenient operation,
care-free comfort and years of dependability.
Features
• Inverter technology (variable speed compressor)
• High efciency for low operating cost
• DiamonGold Advanced Corrosion Protection™
• Auto dry indoor coil
• Cooling/Heating/Fan mode
• Surge cool
• Natural air ow
• 4-Way auto swing
• Ultra quiet operation
• Sleep mode
• Dehumidifying mode
• Auto restart
• Built-in low ambient standard, down to 14ºF
(Cooling Mode)
• 24-hour on-off timer
• Condensate sensor connection
• Multiple ease of installation features (see p.7)
MW09C1J, MW12C1J MW18C3J, MW24C3J
MR09C1J, MR12C1J MR18C3J MR24C3J
PERFORMANCE RATINGS Single Wall Mounted - Cool Inv
9k 12k 18k 24k SYSTEM MODEL NO. M09CJ M12CJ M18CJ M24CJ INDOOR MODEL MW09C1J MW12C1J MW18C3J MW24C3J OUTDOOR MODEL MR09C1J MR12C1J MR18C3J MR24C3J SPECIFICATIONS CAPACITY COOLING (RATED) Btu 9,000 11,200 17,000 22,000 CAPACITY COOLING (MIN~MAX) Btu 3,070~12,120 3,070~13,660 3,070~20,470 3,070~26,270 CAPACITY HEATING (RATED) Btu N/A N/A N/A N/A CAPACITY HEATING (MIN~MAX) Btu N/A N/A N/A N/A COOLING AMPS 6 8.4 7 8.7 HEATING AMPS N/A N/A N/A N/A SENSIBLE HEAT RATIO .89 .83 .79 .81 SEER 21.5 21.5 18.0 20.0 EER 13.3 12.5 12.0 10.8 HSPF N/A N/A N/A N/A ENERGY STAR YES(Most Efcient) YES(Most Efcient) YES No MOISTURE REMOVAL Pts/h 2.6 3.0 5.3 6.0 AIRFLOW (QUIET, LOW, MED, HIGH) CFM 124/212/272/335 124/212/272/335 300/399/509/622 300/424/629/742 SOUND RATING - INDOOR dB-A 19 / 24 / 33 / 38 19 / 24 / 33 / 39 29 / 35 / 40 / 45 29 / 35 / 40 / 46 SOUND RATING - OUTDOOR dB-A 45 45 53 54 OPERATING RANGE (COOLING)(WIND BAFFLE) °F 14.0(0)~118.4 14.0(0)~118.4 14.0(0)~118.4 14.0(0)~118.4 OPERATING RANGE (HEATING) °F N/A N/A N/A N/A EST. YEARLY OPERATING COST $ 61 81 127 183 ELECTRICAL DATA POWER SOURCE 115-60-1 115-60-1 230/208-60-1 230/208-60-1 MINIMUM AMPACITY A 10 10 19 19 COOLING WATTS W 677 896 1416 2037 MAX. TD FUSE/BREAKER A 15 15 25 25 POWER AND COMMUNICATION CABLE REFRIGERATION SYSTEM REFRIGERANT R410A R410A R410A R410A COMPRESSOR TYPE Inverter Inverter Inverter Inverter CONNECTIONS Flare Flare Flare Flare LIQUID LINE O.D. in 1/4 1/4 1/4 3/8 SUCTION LINE O.D. in 3/8 3/8 1/2 5/8 FACTORY PRECHARGE ft 35.5 35.3 47.6 63.5 MAX. LINE LENGTH ft 66’ 66’ 66’ 98’ MAX. HEIGHT DIFFERENCE ft 33’ 33’ 33’ 49’ DIMENSIONS & WEIGHT INDOOR UNIT W X H X D in NET WEIGHT lbs 23 23 31 32 SHIPPING WEIGHT lbs 27 27 35 37 OUTDOOR UNIT W X H X D in NET WEIGHT lbs 75 75 108 122 SHIPPING WEIGHT lbs 79 79 115 130 TOTAL NET WEIGHT lbs 97 97 139 154 TOTAL SHIPPING WEIGHT lbs 106 106 150 167
NOTE: All R410 models have 1/2" UNF 20 thread per inch charging and vacuuming ports. An adapter must be used for 1/4" gauges. Adapter part number 67270018 is available through Friedrich parts distributors.
Your operating costs will depend on your utility rates and use. The estimated operating cost is based on a electricity cost of $ .115 per kWh. For more information, visit www.ftc.gov/energy.
Due to continuing research in new energy-saving technology,
specications are subject to change without notice.
No. x AWG
30-5/16x 21-5/16x 11-5/16 30-5/16x21-5/16x11-5/16 34-5/16x25-7/8x12-5/8 34-5/16 x31-1/2 x12-5/8
4 x 18 4 x 18 4 x 18 4 x 18
35-1/4x 11-1/4x 8-5/16 35-1/4x 11-1/4x 8-5/16 40-5/8x 12-7/8x 9-5/8 40-5/8x 12-7/8x 9-5/8
8
9
Page 6
Single Zone
PRELIMINARY SPECIFICATIONS
25.0 SEER WALL-MOUNTED HEAT PUMP
12000 Btu. Our most efcient unit ever! Features for comfort and convenience year 'round. In heating mode, unit efciently heats by using approximately 1/4 of the
energy required by electric heat.
Features
• Inverter technology (variable speed compressor)
• High efciency for low operating cost
• DiamonGold Advanced Corrosion Protection™
• Auto dry indoor coil
• Surge cool/heat
• Natural air ow
• Ultra quiet operation
• Sleep mode
• Auto restart
• Auto changeover
• BLDC Motor
• Low ambient operation down to 14ºF
(Cooling Mode)
• 24-hour on-off timer
• ENERGY STAR® qualied model
• Hidden display (only visible during operation)
• Multiple ease of installation features (see p.7)
MWH12Y3J
25.0 SEER
R
E
I
O
P
U
S
E
F
F
R
Y
C
N
I
C
E
I
MRH12YCJ
PERFORMANCE RATINGS Single Wall Mounted - H/P Inv (High SEER)
12k SYSTEM MODEL NO. HM12YJ INDOOR MODEL MWH12Y3J OUTDOOR MODEL MRH12Y3J SPECIFICATIONS CAPACITY COOLING Btu 12,000 CAPACITY COOLING (MIN~MAX) Btu Pending CAPACITY HEATING Btu 13,600 CAPACITY HEATING (MIN~MAX) Btu Pending COOLING AMPS 3.8 HEATING AMPS 4.3 SENSIBLE HEAT RATIO .84 SEER 25.0 EER 14.0 HSPF 11.0 ENERGY STAR Yes MOISTURE REMOVAL Pts/h 1.7 AIRFLOW (QUIET, LOW, MED, HIGH) CFM 177 / 283 / 417 / 494 SOUND RATING - INDOOR dB-A 42 / 36 / 25 / 17 SOUND RATING - OUTDOOR dB-A 51 OPERATING RANGE (COOLING) °F 14.0(0)~118.4 OPERATING RANGE (HEATING) °F 14~75.2 EST. YEARLY OPERATING COST $ 77 ELECTRICAL DATA POWER SOURCE V 208/230 MINIMUM AMPACITY A COOLING WATTS W 857 HEATING WATTS W 960 MAX. TD FUSE/BREAKER A 15 POWER AND COMMUNICATION CABLE REFRIGERATION SYSTEM REFRIGERANT R410A COMPRESSOR TYPE Twin Rotary CONNECTIONS Flare LIQUID LINE O.D. in 1/4 SUCTION LINE O.D. in 3/8 FACTORY PRECHARGE ft 44.1 MAX. LINE LENGTH ft 49.2 MAX. HEIGHT DIFFERENCE ft 23 DIMENSIONS & WEIGHT INDOOR UNIT W X H X D in 34-7/16 x 11-5/8 x 9-1/4 NET WEIGHT lbs 25 SHIPPING WEIGHT lbs 29 OUTDOOR UNIT W X H X D in 34-5/16 x 25-7/8 x 12-5/8 NET WEIGHT lbs 95 SHIPPING WEIGHT lbs 100 TOTAL NET WEIGHT lbs 119 TOTAL SHIPPING WEIGHT lbs 128
NOTE: All R410 models have 1/2" UNF 20 thread per inch charging and vacuuming ports. An adapter must be used for 1/4" gauges. Adapter part number 67270018 is available through Friedrich parts distributors.
Your operating costs will depend on your utility rates and use. The estimated operating cost is based on a electricity cost of $ .115 per kWh. For more information, visit www.ftc.gov/energy.
Due to continuing research in new energy-saving technology,
specications are subject to change without notice.
No. x AWG
10
4 x 18
10
11
Page 7
Single Zone
PRELIMINARY SPECIFICATIONS
WALL-MOUNTED HEAT PUMPS
9000-18000 Btu. Features for comfort and convenience year 'round. In heating
mode, units efciently heat by using approximately 1/4 of the energy required by
electric heat.
Features
• Inverter technology (variable speed compressor)
• High efciency for low operating cost
• DiamonGold Advanced Corrosion Protection™
• Auto dry indoor coil
• Cooling/Heating/Fan mode
• Surge cool/heat
• Natural air ow
• 4-Way auto swing
• Ultra quiet operation
• Sleep mode
• Dehumidifying mode
• Auto restart
• Auto changeover
• Built-in low ambient standard, down to 14ºF
(Cooling Mode)
• 24-hour on-off timer
• Condensate sensor connection
• Multiple ease of installation features (see p.7)
MW09Y3J, MW12Y3J MW18Y3J
MR09Y3J, MR12Y3J MR18Y3J
PERFORMANCE RATINGS Single Wall Mounted - H/P Inv
9k 12k 18k SYSTEM MODEL NO. M09YJ M12YJ M18YJ INDOOR MODEL MW09Y3J MW12Y3J MW18Y3J OUTDOOR MODEL MR09Y3J MR12Y3J MR18Y3J SPECIFICATIONS CAPACITY COOLING (RATED) Btu 9,000 11,200 17,000 CAPACITY COOLING (MIN~MAX) Btu 3,070~12,620 3,070~14,660 3,070~20,470 CAPACITY HEATING (RATED) Btu 10,800 13,300 20,200 CAPACITY HEATING (MIN~MAX) Btu 3,070~17,060 3,070~20,470 3,070~30,700 COOLING AMPS 3 4.2 7 HEATING AMPS 3.7 4.9 7.8 SENSIBLE HEAT RATIO .88 .81 .78 SEER 21.5 21.5 18.0 EER 13.3 12.5 12.0 HSPF 11.0 11.0 9.7 ENERGY STAR YES(Most Efcient) YES(Most Efcient) YES MOISTURE REMOVAL Pts/h 2.6 3.0 5.3 AIRFLOW (QUIET, LOW, MED, HIGH) CFM 124/212/272/335 124/212/272/335 300/399/509/622 SOUND RATING - INDOOR dB-A 19 / 24 / 33 / 38 19 / 24 / 33 / 39 29 / 35 / 40 / 45 SOUND RATING - OUTDOOR dB-A 45 45 53 OPERATING RANGE (COOLING)(WIND BAFFLE) °F 14.0(0)~118.4 14.0(0)~118.4 14.0(0)~118.4 OPERATING RANGE (HEATING) °F -4.0~75.2 -4.0~75.2 -4.0~75.2 EST. YEARLY OPERATING COST $ 61 81 127 ELECTRICAL DATA POWER SOURCE 230/208 230/208 230/208 MINIMUM AMPACITY A COOLING WATTS W 677 896 1416 MAX. TD FUSE/BREAKER A 15 15 20 POWER AND COMMUNICATION CABLE REFRIGERATION SYSTEM REFRIGERANT R410A R410A R410A COMPRESSOR TYPE Inverter Inverter Inverter CONNECTIONS Flare Flare Flare LIQUID LINE O.D. in 1/4 1/4 1/4 SUCTION LINE O.D. in 3/8 3/8 1/2 FACTORY PRECHARGE ft 35.3 35.3 47.6 MAX. LINE LENGTH ft 66' 66' 66' MAX. HEIGHT DIFFERENCE ft 33' 33' 33' DIMENSIONS & WEIGHT INDOOR UNIT W X H X D in 35-1/4 x11-1/4 x8-1/4 35-1/4 x11-1/4 x8-1/4 40-5/8 x 12-7/8 x 9-5/8 NET WEIGHT lbs 23 23 31 SHIPPING WEIGHT lbs 27 27 36 OUTDOOR UNIT W X H X D in 30-5/16x21-5/16x11-5/16 30-5/16x21-5/16x11-5/16 34-5/16x25-7/8x12-5/8 NET WEIGHT lbs 75 75 108 SHIPPING WEIGHT lbs 79 79 115 TOTAL NET WEIGHT lbs 98 98 139 TOTAL SHIPPING WEIGHT lbs 107 107 150
NOTE: All R410 models have 1/2" UNF 20 thread per inch charging and vacuuming ports. An adapter must be used for 1/4" gauges. Adapter part number 67270018 is available through Friedrich parts distributors.
Your operating costs will depend on your utility rates and use. The estimated operating cost is based on a electricity cost of $ .115 per kWh. For more information, visit www.ftc.gov/energy.
Due to continuing research in new energy-saving technology,
specications are subject to change without notice.
No. x AWG
10 10 19
4 x 18 4 x 18 4 x 18
12
13
Page 8
Single Zone
PRELIMINARY SPECIFICATIONS
WALL-MOUNTED HEAT PUMPS
24000-36000 Btu. Extensive features for comfort and convenience year 'round. In heating
mode, units efciently heat by using approximately 1/4 of the energy required by electric
heat.
Features
• Inverter technology (variable speed compressor)
• High efciency for low operating cost
• DiamonGold Advanced Corrosion Protection™
• Self-cleaning indoor coil
• Cooling/Heating/Fan mode
• Air burst for fast cooling
• Natural air ow
• 4-Way auto swing
• Ultra quiet operation
• Sleep mode
• Dehumidifying mode
• Auto restart
• Auto changeover
• Built-in low ambient standard, down to 14ºF
(Cooling Mode)
• 24-hour on-off timer
• Condensate sensor connection
• Multiple ease of installation features (see p.7)
MW24Y3J MW30Y3J, MW36Y3J
MR24Y3J, MR30Y3J, MR36Y3J
PERFORMANCE RATINGS Single Wall Mounted - H/P Inv
24k 30k 36k SYSTEM MODEL NO. M24YJ M30YJ M36YJ INDOOR MODEL MW24Y3J MW30Y3J MW36Y3J OUTDOOR MODEL MR24Y3J MR30Y3J MR36Y3J SPECIFICATIONS CAPACITY COOLING (RATED) Btu 22,000 30,000 33,000 CAPACITY COOLING (MIN~MAX) Btu 3,070~30,030 3,070~34,000 3,070~34,000 CAPACITY HEATING (RATED) Btu 27,600 32,000 35,200 CAPACITY HEATING (MIN~MAX) Btu 3,070~38,898 3,070~38,900 3,070~38,900 COOLING AMPS HEATING AMPS SENSIBLE HEAT RATIO .66 .61 .67 SEER 21.0 18.5 16.5 EER 12.5 10.0 8.2 HSPF 11.0 10.0 10.0 ENERGY STAR YES(Most Efcient) No No MOISTURE REMOVAL Pts/h 6.8 10.7 10.7 AIRFLOW (QUIET, LOW, MED, HIGH) CFM 300/389/512/600 459/530/706/848 459/530/706/484 SOUND RATING - INDOOR dB-A 33 / 39 / 43 / 46 33 / 39 / 44 / 49 37 / 40 / 44 / 49 SOUND RATING - OUTDOOR dB-A 54 55 55 OPERATING RANGE (COOLING)(WIND BAFFLE) °F 14.0(0)~118.4 14.0(0)~118.4 14.0(0)~118.4 OPERATING RANGE (HEATING) °F -4.0~75.2 -4.0~75.2 -4.0~75.2 EST. YEARLY OPERATING COST $ 158 270 395 ELECTRICAL DATA POWER SOURCE 230/208 230/208 230/208 MINIMUM AMPACITY A COOLING WATTS W 1760 3000 4024 MAX. TD FUSE/BREAKER A 25 25 25 POWER AND COMMUNICATION CABLE REFRIGERATION SYSTEM REFRIGERANT R410A R410A R410A COMPRESSOR TYPE Inverter Inverter Inverter CONNECTIONS Flare Flare Flare LIQUID LINE O.D. in 3/8 3/8 3/8 SUCTION LINE O.D. in 5/8 5/8 5/8 FACTORY PRECHARGE ft 77.6 77.6 77.6 MAX. LINE LENGTH ft 164' 164' 164' MAX. HEIGHT DIFFERENCE ft 98.4' 98.4' 98.4' DIMENSIONS & WEIGHT INDOOR UNIT W X H X D in 46-7/8 x 13-5/8 x10-7/16 46-7/8 x13-5/8 x 10-3/8 46-7/8 x 13-5/8 x 10-3/8 NET WEIGHT lbs 40 40 40 SHIPPING WEIGHT lbs 46 46 46 OUTDOOR UNIT W X H X D in 34-5/16 x31-1/5 x12-5/8 345/16 x31-1/2 x12-5/8 345/16 x31-1/2 x12-5/8 NET WEIGHT lbs 108 108 108 SHIPPING WEIGHT lbs 115 115 115 TOTAL NET WEIGHT lbs 148 148 148 TOTAL SHIPPING WEIGHT lbs 160 160 160
NOTE: All R410 models have 1/2" UNF 20 thread per inch charging and vacuuming ports. An adapter must be used for 1/4" gauges. Adapter part number 67270018 is available through Friedrich parts distributors.
Your operating costs will depend on your utility rates and use. The estimated operating cost is based on a electricity cost of $ .115 per kWh. For more information, visit www.ftc.gov/energy.
Due to continuing research in new energy-saving technology,
specications are subject to change without notice.
No. x AWG
7.9 13.4 17.0
10.7 13.9 16.2
19 19 19
4 x 18 4 x 18 4 x 18
14
15
Page 9
Single Zone
PRELIMINARY SPECIFICATIONS
CEILING CASSETTE HEAT PUMPS
24000 and 36000 Btu. Ceiling cassette models install nearly ush with a drop ceiling for a clean and efcient installation.
Features
• Inverter technology (variable speed compressor)
• Internal condensate pump included
• Natural air ow
• 4-Way cooling
• Surge cool/heat
• Cooling mode
• Dehumidifying mode
• Night Quiet Operation
• Built-in low ambient standard, down to 14ºF (Cooling mode)
• Fan mode
• Independent vane control
• 5 Fan speeds
• Evaporator frost control
• 24-hour on-off timer
• Auto restart
• Auto changeover
• Temperature display on remote
• Ultra-quiet turbo fan
• DiamonGold Advanced Corrosion Protection™
• Clean, modern look
• Flexible installation
• ENERGY STAR® qualied models
• Precise air distribution
MC24Y3J
Low prole indoor unit is
recessed into the ceiling
for a clean look and greater
clearance.
MC36Y3J
PERFORMANCE RATINGS Single Zone Cassette H/P
24k 36k SYSTEM MODEL NO. C24YJ C36YJ INDOOR MODEL MC24Y3J MC36Y3J OUTDOOR MODEL MR24UY3J MR36UY3J SPECIFICATIONS CAPACITY COOLING (RATED) Btu 24,000 36,000 CAPACITY COOLING (MIN~MAX) Btu 9,700~26,700 14,000~42,000 CAPACITY HEATING (RATED) Btu 27,000 40,000 CAPACITY HEATING (MIN~MAX) Btu 10,900~30,000 14,500~45,000 COOLING AMPS Pending Pending HEATING AMPS Pending Pending SENSIBLE HEAT RATIO .77 .76 SEER 17.0 19.0 EER 12.5 13.5 HSPF 9.7 9.5 ENERGY STAR No No MOISTURE REMOVAL Pts/h 5.1 7.7 AIRFLOW (HIGH, MED, LOW ) CFM 600 / 530 / 459 1,060 / 989 / 918 SOUND RATING - INDOOR dB(A) 57 65
SOUND RATING - OUTDOOR dB(A) 62 67 OPERATING RANGE (COOLING) °F 5.0(0)~118.4 5.0(0)~118.4 OPERATING RANGE (HEATING) °F -4.0~64.4 -4.0~64.4 EST. YEARLY OPERATING COST $ 172 240 ELECTRICAL DATA POWER SOURCE V 230/208 230/208 MINIMUM AMPACITY A 18.1 24.5 COOLING WATTS W Pending Pending MAX. TD FUSE/BREAKER A 30 40 REFRIGERATION SYSTEM REFRIGERANT R410A R410A COMPRESSOR TYPE Twin Rotary Twin Rotary CONNECTIONS Flare Flare LIQUID LINE O.D. in 3/8 3/8 SUCTION LINE O.D. in 5/8 5/8 FACTORY PRECHARGE ft 70.5 119.9 MAX. LINE LENGTH ft 164' 164' MAX. HEIGHT DIFFERENCE ft 98.4 98.4
POWER AND COMMUNICATION CABLE DIMENSIONS & WEIGHT INDOOR UNIT W X H X D in 33-1/16 x 8-1/16 x 33-1/16 33-1/16 x 11-3/8 x 33-1/16 NET WEIGHT lbs 45 54 INDOOR UNIT GRILLE* NET WEIGHT lbs 11 20 SHIPPING WEIGHT lbs 58 65 OUTDOOR UNIT W X H X D in 37-7/16 x 32-7/8 x 13 37-13/32 x 54-3/8 x 13 NET WEIGHT lbs 132 203 SHIPPING WEIGHT lbs 146 227 TOTAL NET WEIGHT lbs 178 257 TOTAL SHIPPING WEIGHT lbs 203 293
No. x AWG
4 x 18 4 x 18
MRC24DY3J MRC36Y3J
16
NOTE: All R410 models have 1/2" UNF 20 thread per inch charging and vacuuming ports. An adapter must be used for 1/4" gauges. Adapter part number 67270018 is available through Friedrich parts distributors.
Your operating costs will depend on your utility rates and use. The estimated operating cost is based on a electricity cost of $ .115 per kWh. For more information, visit www.ftc.gov/energy.
*The included indoor unit grille ships in separate carton.
Due to continuing research in new energy-saving technology,
specications are subject to change without notice.
17
Page 10
Single Zone
PRELIMINARY SPECIFICATIONS
CONCEALED DUCT HEAT PUMP
24000 and 36000 Btu. Indoor unit is installed in the ceiling or furr down for
unobtrusive installation.
Features
• Inverter technology (variable speed compressor)
• Internal condensate pump included
• Cooling mode
• Dehumidifying mode
• 3 Fan speeds+
• 24-hour on-off timer
• Auto restart
• Auto changeover
• Sleep mode
• Control lock function
• External Static Pressure Range(ESP)
- 24,000 (0.1 - 0.78) WC
- 36,000 (0.15 - 0.6) WC
MD24Y3J, MD36Y3J
MRD24Y3J MRD363J
PERFORMANCE RATINGS Single Zone Concealed Ducted H/P
24k 36k SYSTEM MODEL NO. D24YJ D36YJ INDOOR MODEL MD24Y3J MD36Y3J OUTDOOR MODEL MR24UY3J MR36UY3J SPECIFICATIONS CAPACITY COOLING (RATED) Btu 24,000 36,000 CAPACITY COOLING (MIN~MAX) Btu 9,700~26,700 16,000~41,400 CAPACITY HEATING (RATED) Btu 27,000 40,000 CAPACITY HEATING (MIN~MAX) Btu 10,900~30,000 17,500~48,000 COOLING AMPS Pending Pending HEATING AMPS Pending Pending SENSIBLE HEAT RATIO .68 .67 SEER 17.0 17.6 EER 12.0 12.1 HSPF 10.0 9.2 ENERGY STAR No No MOISTURE REMOVAL Pts/h 7.0 10.6 AIRFLOW (HIGH, MED, LOW ) CFM 19.5 / 17.5 / 15.0 32.0 / 27.0 / 20.0 SOUND RATING - INDOOR dB(A) 56 56 SOUND RATING - OUTDOOR dB(A) 62 67 OPERATING RANGE (COOLING) °F 5.0~118.4 5.0~118.4 OPERATING RANGE (HEATING) °F -4.0~64.4 -4.0~64.4 EST. YEARLY OPERATING COST $ 180 268 ELECTRICAL DATA POWER SOURCE 230/208 230/208 MINIMUM AMPACITY A Pending Pending COOLING WATTS W Pending Pending MAX. TD FUSE/BREAKER A 30 40 REFRIGERATION SYSTEM REFRIGERANT R410A R410A COMPRESSOR TYPE Twin Rotary Twin Rotary CONNECTIONS Flare Flare LIQUID LINE O.D. in 3/8 3/8 SUCTION LINE O.D. in 5/8 5/8 FACTORY PRECHARGE ft 70.5 119.9 MAX. LINE LENGTH ft 164' 246.1' MAX. HEIGHT DIFFERENCE ft 98.4 98.4 POWER AND COMMUNICATION CABLE DIMENSIONS & WEIGHT INDOOR UNIT W X H X D in 46-9/16 x 11-3/4 x 17-3/4 48-1/2 x 14-1 x 23-1/4 NET WEIGHT lbs 73 125 SHIPPING WEIGHT lbs 95 139 OUTDOOR UNIT W X H X D in 37-7/16 x 32-7/8 x 13 37-7/16 x 54-3/8 x 13 NET WEIGHT lbs 132 203 SHIPPING WEIGHT lbs 146 227 TOTAL NET WEIGHT lbs 205 327 TOTAL SHIPPING WEIGHT lbs 240 366
NOTE: All R410 models have 1/2" UNF 20 thread per inch charging and vacuuming ports. An adapter must be used for 1/4" gauges. Adapter part number 67270018 is available through Friedrich parts distributors.
Your operating costs will depend on your utility rates and use. The estimated operating cost is based on a electricity cost of $ .115 per kWh. For more information, visit www.ftc.gov/energy.
Due to continuing research in new energy-saving technology,
specications are subject to change without notice.
No. x AWG
4 x 18 4 x 18
18
19
Page 11
Multizone
PRELIMINARY SPECIFICATIONS
WALL-MOUNTED HEAT PUMPS
High efciency heat pumps with features for comfort and convenience year
'round. In heating mode, units efciently heat by using approximately 1/4 of the
energy required by electric heat.
Features
• Inverter technology (variable speed compressor)
• High efciency for low operating cost
• DiamonGold Advanced Corrosion Protection™
• Self-cleaning indoor coil
• Cooling/Heating/Fan mode
• Air burst for fast cooling
• Natural air ow
• 4-Way auto swing
• Ultra quiet operation
• Sleep mode
• Dehumidifying mode
MW09Y3J, MW12Y3J MW18Y3J
• Auto restart
• Auto changeover
• Built-in low ambient standard, down to 14ºF (Cooling Mode)
• 24-hour on-off timer
• Condensate sensor connection
• Built-in kick stand
PERFORMANCE RATINGS Multi Zone Wall Mounted
9k 12k 18k INDOOR MODEL MW09Y3J MW12Y3J MW18Y3J SPECIFICATIONS CAPACITY COOLING (RATED) Btu 9,000 11,200 17,000 MOISTURE REMOVAL Pts/h 2.6 3.0 5.3 AIRFLOW (QUIET, LOW, MED, HIGH) CFM 124/212/272/335 124/212/272/335 300/399/509/622 SOUND RATING - INDOOR dB-A 19 / 24 / 33 / 38 19 / 24 / 33 / 39 29 / 35 / 40 / 45 ELECTRICAL DATA POWER SOURCE V, Ø, Hz 230/208-60-1 230/208-60-1 230/208-60-1 REFRIGERATION SYSTEM CONNECTIONS Flare Flare Flare LIQUID LINE O.D. in 1/4 1/4 1/4 SUCTION LINE O.D. in 3/8 3/8 1/2 DIMENSIONS & WEIGHT W X H X D in 35-1/4 x11-1/4 x 8-1/4 35-1/4 x 11-1/4 x 8-1/4 40-5/8 x 12-7/8 x 9-5/8 NET WEIGHT lbs 23 23 31 SHIPPING WEIGHT lbs 27 27 35
PERFORMANCE RATINGS Multi Outdoor
24k 36k OUTDOOR MODEL MR24DY3JM MR36TQY3JM SPECIFICATIONS POWER INPUT COOLING MIN.~RATED~MAX. Btu 1,330~4,879~10,543 2,627~9,281~13,375 POWER INPUT HEATING MIN.~RATED~MAX. Btu 1,433~7,540~10,577 3,821~12,215~13,989 POWER SUPPLY V , Ø , Hz 208/230, 1, 60 208/230, 1, 60 EST. YEARLY OPERATING COST $ 122-125 170-245 RUNNING CURRENT COOLING MIN.~RATED~MAX. A 2.8~6.6~14.0 3.3~11.8~17.0 RUNNING CURRENT HEATING MIN.~RATED~MAX. A 3.0~10.2~14.1 4.9~15.5~17.8 RUNNING CURRENT COOLING MIN.~RATED~MAX. W 390~1430~3090 770~2720~3920 RUNNING CURRENT HEATING MIN.~RATED~MAX. W 420~2210~3100 1120~3580~4100 POWER AND COMMUNICATION CABLE No. x AWG 4 X 18 4 X 18 DIMENSIONS W X H X D inch 34-1/4 x 31-7/8 x12-5/8 35-7/16 x 45-7/8 x14-5/8 NET WEIGHT lbs 130 209 REFRIGERATION SYSTEM REFRIGERANT R410A R410A FACTORY PRECHARGE ft 74.1 123.5 LIQUID LINE O.D. in 1/4 1/4 SUCTION LINE O.D. in 3/8 3/8 MAX. LINE LENGTH ft 246.1 246.1 MAX. HEIGHT DIFFERENCE ft 49.2 49.2 SOUND PRESSURE LEVEL COOLING A 51 57 SOUND PRESSURE LEVEL HEATING A 51 57 OPERATING RANGE COOLING MIN. ~ MAX. °F DB 14.0 ~ 114.8 14.0 ~ 114.8 OPERATINGRANGE HEATING MIN. ~ MAX. °F WB 5.0 ~ 64.4 5.0 ~ 64.4 MINIMUM AMPACITY A 15 17 MAX. TD FUSE/BREAKER A 25 25
NOTE: All R410 models have 1/2" UNF 20 thread per inch charging and vacuuming ports. An adapter must be used for 1/4" gauges. Adapter part number 67270018 is available through Friedrich parts distributors.
MR24DY3JM MR36TQY3JM
20
Your operating costs will depend on your utility rates and use. The estimated operating cost is based on a electricity cost of $ .115 per kWh. For more information, visit www.ftc.gov/energy.
Due to continuing research in new energy-saving technology,
specications are subject to change without notice.
21
Page 12
Multizone
PRELIMINARY SPECIFICATIONS
CEILING CASSETTE HEAT PUMPS
Ceiling cassette models install nearly ush with a drop ceiling for a clean and efcient installation.
Features
• Inverter technology (variable speed compressor)
• Internal condensate pump included
• Natural air ow
• 4-Way cooling
• Surge Cool/Heat
• Cooling mode
• Dehumidifying mode
• Night Quiet Operation
• Built-in low ambient standard, down to 14ºF (Cooling mode)
• Fan mode
• Independent vane control
• 5 Fan speeds
• Evaporator frost control
• 24-hour on-off timer
• Auto restart
• Auto changeover
• Temperature display on remote
• Ultra-quiet turbo fan
• DiamonGold Advanced Corrosion Protection™
• Clean, modern look
• Flexible installation
• ENERGY STAR® qualied models
• Precise air distribution
MC12Y3JM, MC18Y3JM
PERFORMANCE RATINGS Multi Zone Cassette
INDOOR MODEL MC12Y3JM MC18Y3JM SPECIFICATIONS CAPACITY COOLING (RATED) Btu 12,000 18,000 MOISTURE REMOVAL Pts/h 4.2 4.2 AIRFLOW ( LOW, MED, HIGH) CFM 335 / 283 / 247 459 / 424 / 388 SOUND RATING - INDOOR dB-A 32/35/38 34/37/38 ELECTRICAL DATA POWER SOURCE V, Ø, Hz 208/230, 1, 60 208/230, 1, 60 REFRIGERATION SYSTEM CONNECTIONS Flare Flare LIQUID LINE O.D. in 1/4 1/4 SUCTION LINE O.D. in 3/8 1/2 POWER AND COMMUNICATION CABLE No. x AWG 4C x 18 4C x 18 DIMENSIONS & WEIGHT W X H X D in 22-7/16 x 8-7/16 x 22-7/16 22-7/16 x 10-3/32 x 22-7/16 NET WEIGHT lbs 31 33 SHIPPING WEIGHT lbs 36 42
PERFORMANCE RATINGS Multi Outdoor
24k 36k OUTDOOR MODEL MR24DY3JM MR36TQY3JM SPECIFICATIONS POWER INPUT COOLING MIN.~RATED~MAX. Btu 1,330~4,879~10,543 2,627~9,281~13,375 POWER INPUT HEATING MIN.~RATED~MAX. Btu 1,433~7,540~10,577 3,821~12,215~13,989 POWER SUPPLY V , Ø , Hz 208/230, 1, 60 208/230, 1, 60 EST. YEARLY OPERATING COST $ 122-125 170-245 RUNNING CURRENT COOLING MIN.~RATED~MAX. A 2.8~6.6~14.0 3.3~11.8~17.0 RUNNING CURRENT HEATING MIN.~RATED~MAX. A 3.0~10.2~14.1 4.9~15.5~17.8 RUNNING CURRENT COOLING MIN.~RATED~MAX. W 390~1430~3090 770~2720~3920 RUNNING CURRENT HEATING MIN.~RATED~MAX. W 420~2210~3100 1120~3580~4100 POWER AND COMMUNICATION CABLE No. x AWG 4 X 18 4 X 18 DIMENSIONS W X H X D inch 34-1/4 x 31-7/8 x 12-5/8 35-7/16 x 45-7/8 x 14-5/8 NET WEIGHT lbs 130 209 REFRIGERATION SYSTEM REFRIGERANT R410A R410A FACTORY PRECHARGE ft 74.1 123.5 LIQUID LINE O.D. in 1/4 1/4 SUCTION LINE O.D. in 3/8 3/8 MAX. LINE LENGTH ft 246.1 246.1 MAX. HEIGHT DIFFERENCE ft 49.2 49.2 SOUND PRESSURE LEVEL COOLING A 51 57 SOUND PRESSURE LEVEL HEATING A 51 57 OPERATING RANGE COOLING MIN. ~ MAX. °F DB 14.0 ~ 114.8 14.0 ~ 114.8 OPERATINGRANGE HEATING MIN. ~ MAX. °F WB 5.0 ~ 64.4 5.0 ~ 64.4 MINIMUM AMPACITY A 15.4 16.8 MAX. TD FUSE/BREAKER A 25 25
NOTE: All R410 models have 1/2" UNF 20 thread per inch charging and vacuuming ports. An adapter must be used for 1/4" gauges. Adapter part number 67270018 is available through Friedrich parts distributors.
MR24DY3JM MR36TQY3JM
22
Your operating costs will depend on your utility rates and use. The estimated operating cost is based on a electricity cost of $ .115 per kWh. For more information, visit www.ftc.gov/energy.
Due to continuing research in new energy-saving technology, specications are subject to change without notice.
23
Page 13
Multizone
PRELIMINARY SPECIFICATIONS
CONCEALED DUCT HEAT PUMPS
Indoor unit is installed in the ceiling or furr down for unobtrusive installation.
Features
• Inverter technology (variable speed compressor)
• Internal condensate pump included
• Cooling mode
• Dehumidifying mode
• 3 Fan speeds+
• 24-hour on-off timer
• Auto restart
• Auto changeover
• Sleep mode
• Control lock function
• External Static Pressure Range(ESP)
- 12,000 ( 0.0 - 0.16) WC
- 18,000 ( 0.0 - 0.16) WC
Fresh air can be easily introduced to the
conditioned space whenever
required.
MD12Y3JM, MD18Y3JM
PERFORMANCE RATINGS Multi Zone Concealed Ducted
INDOOR MODEL MD12Y3JM MD18Y3JM SPECIFICATIONS CAPACITY COOLING (RATED) Btu 12,000 18,000 MOISTURE REMOVAL Pts/h 2.5 4.2 AIRFLOW ( LOW, MED, HIGH) CFM 335 / 300 / 265 530 / 477 / 406 SOUND RATING - INDOOR dB-A 26/31/33 29/31/34 ELECTRICAL DATA POWER SOURCE 208/230, 1, 60 208/230, 1, 60 REFRIGERATION SYSTEM CONNECTIONS Flare Flare LIQUID LINE O.D. in 1/4 1/4 SUCTION LINE O.D. in 3/8 1/2 POWER AND COMMUNICATION CABLE No. x AWG 4C x 18 4C x 18 DIMENSIONS & WEIGHT W X H X D in 32-9/32 x 7-15/32 x 22-5/8 43-5/16 x 7-15/32 x 22-5/8 NET WEIGHT lbs 45 58 SHIPPING WEIGHT lbs 51 65
PERFORMANCE RATINGS Multi Outdoor
24k 36k OUTDOOR MODEL MR24DY3JM MR36TQY3JM SPECIFICATIONS POWER INPUT COOLING MIN.~RATED~MAX. Btu 1,330~4,879~10,543 2,627~9,281~13,375 POWER INPUT HEATING MIN.~RATED~MAX. Btu 1,433~7,540~10,577 3,821~12,215~13,989 POWER SUPPLY V , Ø , Hz 208/230, 1, 60 208/230, 1, 60 EST. YEARLY OPERATING COST $ 122-125 170-245 RUNNING CURRENT COOLING MIN.~RATED~MAX. A 2.8~6.6~14.0 3.3~11.8~17.0 RUNNING CURRENT HEATING MIN.~RATED~MAX. A 3.0~10.2~14.1 4.9~15.5~17.8 RUNNING CURRENT COOLING MIN.~RATED~MAX. W 390~1430~3090 770~2720~3920 RUNNING CURRENT HEATING MIN.~RATED~MAX. W 420~2210~3100 1120~3580~4100 POWER AND COMMUNICATION CABLE No. x AWG 4 X 18 4 X 18 DIMENSIONS W X H X D inch 34-1/4 x 31-7/8 x 12-5/8 35-7/16 x 45-7/8 x 14-5/8 NET WEIGHT lbs 130 209 REFRIGERATION SYSTEM REFRIGERANT R410A R410A FACTORY PRECHARGE ft 74.1 123.5 LIQUID LINE O.D. in 1/4 1/4 SUCTION LINE O.D. in 3/8 3/8 MAX. LINE LENGTH ft 246.1 246.1 MAX. HEIGHT DIFFERENCE ft 49.2 49.2 SOUND PRESSURE LEVEL COOLING A 51 57 SOUND PRESSURE LEVEL HEATING A 51 57 OPERATING RANGE COOLING MIN. ~ MAX. °F DB 14.0 ~ 114.8 14.0 ~ 114.8 OPERATINGRANGE HEATING MIN. ~ MAX. °F WB 5.0 ~ 64.4 5.0 ~ 64.4 MINIMUM AMPACITY A 15.4 16.8 MAX. TD FUSE/BREAKER A 25 25
NOTE: All R410 models have 1/2" UNF 20 thread per inch charging and vacuuming ports. An adapter must be used for 1/4" gauges. Adapter part number 67270018 is available through Friedrich parts distributors.
MR24DY3JM MR36TQY3JM
24
Your operating costs will depend on your utility rates and use. The estimated operating cost is based on a electricity cost of $ .115 per kWh. For more information, visit www.ftc.gov/energy.
Due to continuing research in new energy-saving technology, specications are subject to change without notice.
25
Page 14
Remote Controls Multizone
Wired and wireless controllers.
Mix and match wall-mounted,
131
Wall control thermostat with
infrared sensor that enables
communication between
the remote control and the thermostat.
Wireless Controllers
Wired Controllers
Concealed Ducted
D24YJ, D26YJ MD12Y3JM, MD18Y3JM
concealed duct and ceiling
MULTIZONE
COMBINATIONS
cassette models.
Enjoy the exibility
to mix and match
systems to t your
application.
Cassette
C24YJ, C36YJ, MC12Y3JM, MC18Y3JM
26
All Wall-mounted Models
DWC1- Optional
All Ductless Models
27
Page 15
PRELIMINARY SPECIFICATIONSPRELIMINARY SPECIFICATIONS
24K Combination of Indoor Units (kBTU/h Class)
Wall Mounted Ducted Casset te Capacity Efficiency
9K 12K 18K 12K 18K 12K 18K Min Nominal Max SEER EER HSPF COP
2 Indoor Units • • 10798 17000 19800 19 12.6 7.7 3.0 Y
11100 17700 23100 19 12.8 7.7 3.1 Y
114 00 19200 27500 19 13.1 8.2 3.3 Y
10798 18600 23100 16.7 12.1 7.8 3.1 Y
10798 18600 27500 16.7 12.3 8.2 3.3 Y
10798 18600 23100 19.0 12.8 7.7 3.1 Y
10798 18600 27500 19.0 13.1 8.2 3.3 Y
• • 11400 19200 25500 19 13.1 8.2 3.3 Y
114 00 19200 27500 19 13.1 8.2 3.3 Y
11400 18600 25500 16.7 12.3 8.2 3.3 N
11400 18600 27500 16.7 12.3 8.2 3.3 N
11400 18600 25500 19 13.1 8.2 3.3 Y
11400 18600 27500 19 13.1 8.2 3.3 Y
11400 18600 25500 16.7 12.3 8.2 3.3 N
114 00 18600 27500 19 13.1 8.2 3.3 Y
• • 12300 18000 25500 14.4 11.5 8.1 3.3 N
• • 12300 18000 25500 19 13.1 8.2 3.3 Y
3 Indoor Units
36K
2 Indoor Units • • 10798 18000 19800 13.5 9.5 9.3 2.9 Y
• • • 11700 19200 28800 21.7 13.4 9.4 3.5 Y
• • 1170 0 19200 28800 21.7 13.4 9.4 3.5 Y
• • 11700 18600 28800 19.5 12.6 9.0 3.5 N
• • 11700 18600 28800 21.7 13.4 9.4 3.5 Y
• • 11700 1920 0 28800 21.7 13.4 9.4 3.5 Y
• • 11700 18600 28800 19.05 12.6 9. 0 3.5 N
• • 11700 18600 28800 21.7 13.4 9.4 3.5 Y
11700 18600 28800 19.05 12.6 9.0 3.5 N
11700 18600 28800 21.7 13.4 9.4 3.5 Y
Combination of Indoor Units (kBTU/h Class)
Wall Mounted Ducted C asset te C apacity Efficiency
9K 12K 18K 12K 18K 12K 18K Min Nominal Max SEER EER
12597 21000 23100 14.1 10.0 8.9 2.8 Y
16197 27000 29700 15.8 11.2 10.0 3.1 Y
10798 34000 36300 13.8 9.7 8.9 2.8 N
10798 34000 36300 15.4 10.9 9.5 3 .1 N
10798 34000 36300 14.1 10.0 8.9 2.8 Y
10798 34000 36300 15.8 11.2 10.0 3.1 Y
• • 14397 24000 26400 14.7 10.3 10.0 3.1 Y
17996 30000 33000 16.4 11.5 10.0 3.1 Y
17996 34000 36300 14.3 10.1 9.5 3.1
1
17996 34000 36300 14.7 10.3 10 3.1 Y
17996 34000 36300 16.4 11.5 10 3 .1 Y
• • 19796 33000 36300 17.1 11.5 10.1 3.2 Y
19796 34000 36300 16 11.3 9.5 3.1 N
19796 34000 36300 15.8 11.2 9.6 3 .1 N
7996 34000 36300 16 11.3 9.5 3 .1 N
HSPF COP
E-STA R
36K
Combination of Indoor Units (kBTU/h Class)
Wall Mounted Ducted Casset te Capacity Efficiency
9K 12K 18K 12K 18K 12K 18K Min Nominal Max SEER EER HSPF COP E-S TAR
19796 34000 36300 16.4 11.5
19796 34000 36300 17.1 11.5
• • 14397 24000 26400 13.9 9.9
17996 30000 33000 15.5 11.1
14397 24000 26400 14.3 10.1
17996 30000 33000 16.0 11.3
• • 19796 33000 36300 15.4 11.0
19796 33000 36300 16.0 11.3
19796 33000 36300 15.8 11.2
• • 14397 24000 26400 14.7 10.3
17996 17996 17996 16.4 11.5
• • 19796 33000 36300 17.1 11.5
3 Indoor Units
N
• • • 16197 27000 2970 0 15.8 11.2 10.0 3.1 Y
• • 17996 30000 33000 16.4 11.5 10.0 3.1 Y
• • 20396 34000 374 00 17. 5 12.5 10.5 3.4 Y
• • 10798 34000 374 00 16 11.3
• • 10798 34000 374 00 17 12.3
• • 10798 34000 374 0 0 16.4 11.5
• • 10798 34000 37400 17.5 12.5
• • 20396 34000 374 00 17. 1 12.0 10.4 3.3 Y
20396 34000 3740 0 17.5 12.5 10.4 3.4 Y
10798 34000 374 00 16.7 11.8
10798 34000 3740 0 1 7.0 12.3
10798 34000 374 00 17. 1 12.0
10798 34000 3740 0 1 7. 5 12.5
• • 20396 34000 374 00 17. 5 12.5
10798 34000 37400 17. 0 12.3
10798 34000 374 00 17 12.3
10798 34000 37400 17. 5 12.5
10798 34000 374 00 17. 5 12.5
• • 10798 34000 374 0 0 16.7 11.8
10798 34000 3740 0 17.0 12.3
• • 10798 34000 374 00 17. 0 12.3
10798 34000 374 00 17 12.3
• • 10798 34000 374 00 17.1 12.0
10798 34000 3740 0 1 7. 5 12.5
• • 10798 34000 37400 17.5 12.5
• • • 2
• • 20396 34000 374 00 17. 5 12.5
• • 20396 34000 374 00 17 12.3
• • 20396 34000 3740 0 17 12.3
• • 20396 34000 374 00 17. 5 12.5
• • 20396 34000 374 00 17. 5 12.5
• • 20396 34000 374 00 17. 5 12.5
20396 34000 37400 1 7.0 12.3
20396 34000 374 0 0 17. 0 12.3
0396 34000 3740 0 17.5 12.5
10.0 3.1
10.1 3.2
9.0 3.0
9.0 3.0
9.5 3 .1
9.5 3 .1
9.0 3.0
9.5 3 .1
9.6 3 .1
10.0 3.1
10.0 3.1
10.1 3.2
9.5 3 .1
10.0 3.3
10.0 3.1
10.5 3.4
9.8 3.2
10.0 3.3
10.4 3.3
10.5 3.4
10.5 3.4
10.0 3.3
10.0 3.3
10.5 3.4
10.5 3.4
9.8 3.3
10.0 3.3
10.0 3.3
10.0 3.3
10.4 3.3
10.5 3.4
10.5 3.4
10.5 3.4
10.5 3.4
10 3.3
10 3.3
10.5 3.4
10.5 3.4
10.5 3.4
10.0 3.3
10.0 3.3
Y
Y
N
N
N
N
N
N
N
Y
Y
Y
N
N
Y
Y
N
N
Y
Y
Y
N
N
Y
Y
N
N
N
N
Y
Y
Y
Y
Y
N
N
Y
Y
Y
N
N
28
29
Page 16
PRELIMINARY SPECIFICATIONS
OPTIONAL ACCESSORIES
36K Combination of Indoor Units (kBTU/h Class)
Wall Mounted Ducted Cassette Capacity Efficiency
9K 12K 18K 12K 18K 12K 18K Min Nominal Max
20396 34000 3740 0 17. 5 12.5 10.5
20396 34000 37400 1 7. 5 12.5 10.5
20396 34000 374 00 17 12.3 10
20396 34000 374 00 17 12.3 10
20396 34000 37400 17. 5 12.5 10.5
• • 20396 34000 37400 1 7. 5 12.5 10.5
• • 20396 34000 374 0 0 17 12.3 10
• • 20396 34000 374 00 17. 5 12.5 10.5
20396 34000 3740 0 17 12.3 10
20396 34000 374 00 17 12.3 10
20396 34000 37400 17 12.3 10
• • • 20396 34000 37400 16.5 12 9.5
• • 20396 34000 3740 0 16.5 12 9.5
• • 20396 34000 3740 0 17 12.3 10
• • 20396 34000 3740 0 17 12.3 10
• • 20396 34000 3740 0 16.5 12 9.5
• • 20396 34000 374 0 0 17 12.3 10
• • 20396 34000 374 00 17 12.3 10
• • 20396 34000 37400 17 12.3 10
• • • 20396 34000 37400 17. 5 12.5 10.4
• • 20396 34000 374 00 17. 5 12.5 10.4
• • 20396 34000 374 0 0 17. 5 12.5 10.4
4 Indoor Units
• • • • 20396 34000 374 00 17. 5 12.5 10.4
• • • 20396 34000 3740 0 17.5 12.5 10.4
• • • 20396 34000 37400 17. 5 12.5 10.4
• • • 10798 34000 374 00 17 12.3 10
• • • 10798 34000 37400 17 12.3 10
• • • 10798 34000 3740 0 17. 5 12.5 10.4
• • • 10798 34000 374 0 0 17. 5 12.5 10.4
• • • • 20396 34000 374 00 17. 5 12.5 10.4
• • • • 10798 34000 374 00 17 12.3 10
• • • • 10798 34000 374 00 17. 5 12.5 10.4
• • 10798 34000 374 00 17 12.3 10
• • 10798 34000 3740 0 17. 5 12.5 10.4
• • • 20396 34000 3740 0 17.5 12.5 10.4
• • • 10798 34000 37400 17 12.3 10
• • • 10798 34000 3740 0 17.5 12.5 10.4
• • • • 2
• • • • 20396 34000 37400 17 12.3 10
• • • • 20396 34000 374 00 17. 5 12.5 10.4
• • • • 20396 34000 374 0 0 17 12.3 10
• • • • 20396 34000 3740 0 17 12.3 10
• • • • 20396 34000 374 00
0396 34000 3740 0 16.5 12.0 9.5 3.2 Y
SEER EER HSPF COP E-S TAR
Y
Y
N
N
Y
Y
N
Y
N
N
N
N N N
N
N
N
N
N
Y
Y
Y
Y
Y
Y
N
N
Y
Y
Y
N
Y
N
Y
Y
N
Y
N
Y
N
N
Y
17. 5 12.5 10.4
3.4
3.4
3.3
3.3
3.4
3.4
3.3
3.4
3.3
3.3
3.3
3.2
3.2
3.3
3.3
3.2
3.3
3.3
3.3
3.4
3.4
3.4
3.4
3.4
3.4
3.3
3.3
3.4
3.4
3.4
3.3
3.4
3.3
3.4
3.4
3.3
3.4
3.3
3.4
3.3
3.3
3.4
Refrigeration Line Sets
USED WITH Length Ft. Liquid Suction Kit#
15’ 1/4” 3/8” T32150
9000 and 12000 BTU indoor units
18000 BTU indoor units
24000,30000 and 36000
BTU indoor units
35’ 1 /4” 3/8” T32350
15’ 1/4” 1/2” T421 50
35’ 1 /4” 1/2” T423 50
15’ 3/8 ” 5/8” T53150
35’ 3/8” 5/8” T53350
Low Ambient Wind Baffle Kit
Wind bafe allows operation down to zero
(Available for Wall-Mounted Single Zone)
WIND BAFFLE
DLAWB1 9000 - 12000 Btu wall-mounted single zone
DLAWB2 18000 - 36000 Btu wall-mounted single zone
USED WITH
models
models
Thermostat
DWC1-Wired Wall Thermostat (Available for all models)
Low Voltage Condensate Pump 24V Condensate Pumps available from Aspen Pumps by calling 732-248-8066
AquaGuard Condensate Sensor
30
31
Page 17
PRELIMINARY
Friedrich Air Conditioning Co. l 10001 Reunion Place, Suite 500 l San Antonio, TX 78216 l 877.599.5665
www.friedrich.com
Preliminary_Commercial_Ductless_Brochure_2014 (11-13) Printed in USA
Loading...