SINGLE and MULTI-ZONE WALL MOUNTED, FLOOR/CEILING UNIVERSAL, CEILING CASSETTE and CEILING SUSPENDED.
DUCTLESS SPLIT SYSTEMS
The ultimate room air conditioner.
Easy to install. Exceptionally quiet.
Totally flexible.
Ductless splits are an innovative and efcient alternative to
window and thru-the-wall units. They have the benets of a
central system, without the difculty and expense of installing
ductwork.
Like a central system, without the ductwork.
electric wiring
refrigerant lines
INDOOR UNIT
converts warm indoor air to
cold indoor air, conditioning
and dehumidifying the
room while ltering the air.
Unit is mounted high on
the wall.
REFRIGERANT LINES AND
ELECTRICAL pass through
a 3” wall opening and run
along the exterior of the
building to the condensing
unit. Electrical hard-wiring
is required.
Easy to install
Friedrich ductless split systems have the
advantages of a ducted installation without
the high material and labor costs. Absolutely
no ductwork is required, so most systems
can be installed and running in a few hours.
SEER ratings up to 20.0
All Friedrich ductless models exceed the
federal 13.0 SEER requirements. And, a full
one-third of our models have super high
ratings ranging from 16.5 to 20.0 SEER.
Extremely quiet
Ductless systems keep the operating noise
of the condensing unit outdoors, while
the blower fan of the indoor unit remains
whisper quiet.
Zone cooling flexibility
OUTDOOR CONDENSER
transfers heat to the outdoors.
Compact unit can be placed
at ground level, hung on an
outside wall or placed on the
roof of a building
hard-wired
All Friedrich units feature advanced
inverter technology
Inverter technology lets you reach the desired
temperature faster, maintain it more accurately, and
reduce energy costs. Inverter technology varies the
compressor and condenser and indoor fan
speeds, eliminating constant compressor startups/shut-downs that traditional technology
requires to maintain the set temperature.
INVERTER
TECHNOLOGY
Initial
startup
setpoint
Independently condition up to 4 separate
rooms using only a single outdoor unit.
Achieve the ultimate in comfort and energy
control by cooling and heating only the
rooms that are in use.
Inverter TechnologyStandard Technology
Inverter Energy Usage
2nd
startup
Inverter reaches
setpoint faster, then
adjusts capacity as
required to maintain
accurate temp
1st
shutdown
Standard Energy Usage
3rd
startup
2nd
shutdown
Variable capacity advantages
Inverter Technology allows each system to
adjust capacity and cooling output to provide
only the amount of cooling needed at a given
time. For example, an 18,000 BTU/h system
will operate even more efciently as a
15,500 if that is all that’s needed.
Zero duct loss
The DOE reports that ducted systems lose
an average of 25-40% in performance due to
leaks, cracks or disconnections in ductwork.
No ductwork means zero duct loss– ultra
high efciency delivers directly to the room.
No dirty air ducts
Now there’s no need to clean dirty air ducts
that can harbor dust, germs and allergens
that are eventually blown into your home or
ofce.
Residential
applications
• Room additions/renovations
• Homes without ductwork
• Bedrooms and family rooms
• Garage workshops
• Sunrooms
• Guest quarters
• Wine cellars
Commercial
applications
• Computer rooms/server
rooms
• Restaurant kitchen and prep
areas
• Ofces in warehouse spaces
• Storage facilities
• Buildings where security
concerns prevent the use of
window units
• Internal areas without
exterior wall access
Learn more about ductless
visit www.friedrich.com
to see an online video that explains the advantages
of Friedrich ductless split systems
R-410A
All models use
environmentally
friendly R-410A
refrigerant.
Wall mounted single zone
Wall mounted multi-zone heat pumps
One wall-mounted indoor unit
connected to one outdoor unit.
Features
• Auto swing louvers (up/down)
• Continuous ‘Air Sweep’
• Auto-restart after power interruptions
• Auto-shut aps close when unit is off
for a sleeker appearance
• Washable, reusable air lters
• Removable front grille
• Auto-changeover (heat pump models)
LCD wireless remote
• LCD remote for each indoor unit
• 24-hour timer and sleep timer
• Auto/cool/dry/fan/heat* modes
• Four fan speeds heating* or cooling:
high/medium/low/quiet, plus auto-fan
• Secured remote control holder
• Four different transmitter codes to prevent
unintentional interference with nearby units
Two, three or four wall-mounted indoor
units connected to one outdoor unit.
Features
• Auto swing louvers (up/down)
• Continuous ‘Air Sweep’
• Auto-restart after power interruptions
• Auto-shut aps close when unit is off
• Washable, reusable air lters
• Removable front grille
• Auto-changeover
• Low-ambient operation
MW09,
MW12
Precise comfort from
one system in up to four
different rooms.
That’s the beauty– and
efciency of a Friedrich
Multi-zone system.
* Heat pump models only
Pictured: Single zone model MW09Y3G indoor unit. Multi-zone system M36QYF.
ELECTRICAL DATA (all indoor units receive power from outdoor unit; values listed are total)
Power Source230/208-60-1230/208-60-1230/208-60-1230/208-60-1
Min. AmpacityA15151522.5
Cooling WattsW1600190023003900
Max. TD Fuse/BreakerA20202030
REFRIGERATION SYSTEM
RefrigerantR410AR410AR410AR410A
Compressor TypeINVERTERINVERTERINVERTERINVERTER
ConnectionsFlareFlareFlareFlare
Liquid Line O.D.in1/41/41/41/41/4
Suction Line O.D.in3/83/83/83/83/8
Factory Prechargeft989898165
Max. Line LengthftEach unit:82 Total:98Each unit:82 Total:98Each unit:82 Total:98Each unit:82 Total:230
Max. Height Differenceft33333349
DIMENSIONS & WEIGHT
INDOOR
UNIT
OUTDOOR
UNIT
W x H x Din 31
Net Weightlbs21 ea.212121 ea.21 ea.
Shipping Weightlbs26 ea.262626 ea.26 ea.
W x H x Din35 3/8 x 32 5/8 x 1335 3/8 x 32 5/8 x 1335 3/8 x 32 5/8 x 1335 3/8 x 32 5/8 x 13
Net Weightlbs151151151159
Shipping Weightlbs164164164172
1
/8 x 10 7/8 x 8 1/2 ea.31 1/8 x 10 7/8 x 8 1/2 ea.31 1/8 x 10 7/8 x 8 1/2 ea.31 1/8 x 10 7/8 x 8 1/2 ea.
Tri-zone heat pumps
PERFORMANCE RATINGS
SYSTEM MODEL NO.
INDOOR MODEL
OUTDOOR MODEL
Capacity CoolingBTU/h
Capacity Cooling Min - MaxBTU/h
Sensible Heat Ratio
in35 3/8 x 32 5/8 x 1335 3/8 x 32 5/8 x 1335 3/8 x 32 5/8 x 13
lbs141141141
lbs154154154
Refrigeration line sets
USED WITH:LENGTH-FT.LIQUIDSUCTIONKIT#
All 9000 and 12000 BTU/h
Indoor Units
All 18000 BTU/h Indoor Units
All MW24Y3F and MW24C3F Units
All 30000 BTU/h Indoor Units and S24YF,
S36YF and C24YF Units
Insulated line sets are available for all Friedrich split systems in 15 ft. and 35 ft. lengths. Each line set is equipped with flare nuts on both ends. Both liquid and
suction lines are insulated. Line sets can be joined together with field supplied double female connectors. Each system requires one line set for each indoor
unit installed. On multi-zone systems, line sets should be ordered based on individual indoor unit capacities not total system capacity. For example, a M18DYF
uses 2 line sets for 9,000 btu units, not 1 for the 18,000 btu product.
DRAIN PUMPUSED WITH
DP-36S36YF
Due to continuing research in new energy-saving technology, specications are subject to change without notice.
NOTE: All models have low ambient capabilities built-in. Capacity is reduced as 0 degrees Fahrenheit is approached.
NOTE: All R410A models have 1/2˝ UNF 20 thread per inch charging and vacuuming ports. An adapter must be used
for 1/4˝ gauges. Adapter part number 67270018 is available through Friedrich par ts distributors.
151/4”3/8”T32150
351/4”3/8”T32350
151/4”1/2”T42150
351/4”1/2”T42350
151/4”5/8”T52150
351/4”5/8”T52350
153/8”5/8”T53150
353/8”5/8”T53350
R-410A
All models use
environmentally
friendly R-410A
refrigerant.
Friedrich Air Conditioning Co. l P.O. Box 1540 l San Antonio, TX 78295-1540 l 800.541.6645 l fax 210.357.4480
www.friedrich.com
DSS-10 (6-10) Printed in USA
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.