D U C T L E S S S P L I T S Y S T E M S
SINGLE and MULTI-ZONE WALL MOUNTED, FLOOR/CEILING UNIVERSAL, CEILING CASSETTE and CEILING SUSPENDED.
DUCTLESS SPLIT SYSTEMS
The ultimate room air conditioner.
Easy to install. Exceptionally quiet.
Totally flexible.
Ductless splits are an innovative and efcient alternative to
window and thru-the-wall units. They have the benets of a
central system, without the difculty and expense of installing
ductwork.
Like a central system, without the ductwork.
electric wiring
refrigerant lines
INDOOR UNIT
converts warm indoor air to
cold indoor air, conditioning
and dehumidifying the
room while ltering the air.
Unit is mounted high on
the wall.
REFRIGERANT LINES AND
ELECTRICAL pass through
a 3” wall opening and run
along the exterior of the
building to the condensing
unit. Electrical hard-wiring
is required.
Easy to install
Friedrich ductless split systems have the
advantages of a ducted installation without
the high material and labor costs. Absolutely
no ductwork is required, so most systems
can be installed and running in a few hours.
SEER ratings up to 20.0
All Friedrich ductless models exceed the
federal 13.0 SEER requirements. And, a full
one-third of our models have super high
ratings ranging from 16.5 to 20.0 SEER.
Extremely quiet
Ductless systems keep the operating noise
of the condensing unit outdoors, while
the blower fan of the indoor unit remains
whisper quiet.
Zone cooling flexibility
OUTDOOR CONDENSER
transfers heat to the outdoors.
Compact unit can be placed
at ground level, hung on an
outside wall or placed on the
roof of a building
hard-wired
All Friedrich units feature advanced
inverter technology
Inverter technology lets you reach the desired
temperature faster, maintain it more accurately, and
reduce energy costs. Inverter technology varies the
compressor and condenser and indoor fan
speeds, eliminating constant compressor startups/shut-downs that traditional technology
requires to maintain the set temperature.
INVERTER
TECHNOLOGY
Initial
startup
setpoint
Independently condition up to 4 separate
rooms using only a single outdoor unit.
Achieve the ultimate in comfort and energy
control by cooling and heating only the
rooms that are in use.
Inverter Technology Standard Technology
Inverter Energy Usage
2nd
startup
Inverter reaches
setpoint faster, then
adjusts capacity as
required to maintain
accurate temp
1st
shutdown
Standard Energy Usage
3rd
startup
2nd
shutdown
Variable capacity advantages
Inverter Technology allows each system to
adjust capacity and cooling output to provide
only the amount of cooling needed at a given
time. For example, an 18,000 BTU/h system
will operate even more efciently as a
15,500 if that is all that’s needed.
Zero duct loss
The DOE reports that ducted systems lose
an average of 25-40% in performance due to
leaks, cracks or disconnections in ductwork.
No ductwork means zero duct loss– ultra
high efciency delivers directly to the room.
No dirty air ducts
Now there’s no need to clean dirty air ducts
that can harbor dust, germs and allergens
that are eventually blown into your home or
ofce.
Residential
applications
• Room additions/renovations
• Homes without ductwork
• Bedrooms and family rooms
• Garage workshops
• Sunrooms
• Guest quarters
• Wine cellars
Commercial
applications
• Computer rooms/server
rooms
• Restaurant kitchen and prep
areas
• Ofces in warehouse spaces
• Storage facilities
• Buildings where security
concerns prevent the use of
window units
• Internal areas without
exterior wall access
Learn more about ductless
visit www.friedrich.com
to see an online video that explains the advantages
of Friedrich ductless split systems
R-410A
All models use
environmentally
friendly R-410A
refrigerant.
Loading...