FRIEDLAND Libra+ Push Installation And Use Manual

1

Contents

Checking pack contents..................... Pg. 2

Safety.................................................

Quick start..........................................

Open push.......................................... Pg. 3

Fit battery .........................................

Mount push .......................................

Troubleshooting.................................. Pg. 4

Specifications..................................... Pg. 5

Disposal and recycling.......................

Guarantee..........................................

Declaration.........................................

Installation and Use

Libra + Push

ENGLISH

2

Libra+ Push

Thank you for choosing this Friedland product. Please use the following instructions to
ensure correct installation and use. Keep these notes in a safe place for future reference.

Unpack your push and identify the following parts:

● Bell push

● CR2032 battery for bell push

● 2 x fixing screws for push

● Adhesive pad

You will need:

● A4mm cross-head screwdriver

● A small flat bladed screwdriver

Checking pack contents

Before proceeding with the installation,
please note the following safety warnings:

¬● Always follow the manufacturer’s advice

when using power tools and wear suitable
protective equipment (e.g. safety goggles)
when drilling holes etc.

¬● Before drilling holes in walls, check for

hidden electricity cables and water pipes,
the use of a cable/pipe locater maybe
advisable if in doubt.

Safety

You need to do the following to get started:

● Open the bell push

● Fit the push battery

Follow the programming procedure for your
Libra+ chime.

Quick start