![](/html/4c/4cc8/4cc857892b659289eeb29a3e2b85e0a2bee0b4dd9493af5e2d42f9cfa0618b09/bg1.png)
GB
S
DK
RUS
POL
FIN
46335PL_Ed1
Instruction Manual
D471 Converter / Extender
Bruksanvisning
D471 Utbyggnadsenhet
Brugsanvisning
D471 Udvider
Käyttöohje
D471 Lisälähetin
Instrukcja obsługi
D471 Nadajnik do przycisku dzwonkowego
àÌÒÚÛ͈Ëfl
D471 м‰ОЛМЛЪВО¸ - иВУ·‡БУ‚‡ЪВО¸
![](/html/4c/4cc8/4cc857892b659289eeb29a3e2b85e0a2bee0b4dd9493af5e2d42f9cfa0618b09/bg2.png)
Evo /Décor Push Extender / Converter
Instructions – Please retain these instructions for future reference
Pack contents:
● Push Converter & CR2032 Lithium coin cell battery
● 2 x screws (ø3x20mm), 2 x wall plugs (ø5x25mm) for mounting the Push
● 0.5M bell wire
You will require:
● A small crosshead and flathead screwdriver
● ø 5 masonry drills
1. Open the converter
To open the front cover carefully
insert a flat bladed screw driver,
into the slot and twist gently
(Fig. 1)
Application
This product will only operate Friedland Evo or Décor range wire-free chimes
● The unit will operate with a simple wired door push, or can be connected to
an existing transformer powered door chime
● This unit is not suitable for outdoor installation
● Do not mount within 30cm of large metal objects, this can block the
transmission from the converter and reduce the range to the chime
● Works with lit pushes - only when used with transformer power
Fig. 1
2. To use with a wired door push only
Take the wires directly from the existing push, or use the supplied
wire to connect to the converter. Use terminals 1 and 2.