fridaylabs.net
fridaylabs fridaylabs
If you have any issues pairing the lock with the app,
simply restart the process by reinserting the battery.
This will set the lock into Search Mode for 5 minutes.
In the app, select the ‘Settings’ icon and then
‘Add Product’ – your phone will begin searching for
the lock.
Moving the lock to another door will require another
install and setup.
Quick Guide
Installation Tips
Download the Friday app from the App Store or
Google Play, then open the app.
Click ‘Setup Product’ and follow the instructions.
Friday app layout
History
Name of Location
Users
Location
Navigation
Locks
Last Activity in
this Location
Add Users
Settings
Inside the lock
LED Pairing Indication
Blinks while in pairing mode
Reset Button
Hold for 3 seconds until LED
turns on for 10 seconds.
Mounting HolesTailpiece Adapter
Credit Card Release
Plug the charger into any USB outlet.
Insert the battery into the charger cradle,
noting the + and – indicators.
0 - 25% Charged
25 - 50% Charged
50 - 75% Charged
Fully charged
75 - 99% Charged
Reverse the battery!
Remove battery, Hot!
Battery Charger
Charge the battery fully (from factory, it will be charged
a maximum of 30%)
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY
AN INCORRECT TYPE. DISPOSE OF USED
BATTERIES ACCORDING TO THE INSTRUCTIONS.
Federal Communication Commission Interference Statement
IMPORTANT NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate this equipment.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment. End users
must follow the specific operating instructions for satisfying RF exposure compliance.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
IC Statement
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following
two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables auxappareils radio exempts de
licence.L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage,
et (2) l'utilisateur de l'appareil doit accepter tout brouillage adioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
RF exposure warning:
The equipment complies with RF exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna
or transmitter.
Avertissement d'exposition RF:
L'équipement est conforme aux limites d'exposition aux RF établies pour un incontrôlés environnement.
Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.
L'antenne (s) utilisée pour ce transmetteur ne doit pas être co-localisés ou fonctionner en conjonction avec
toute
autre antenne ou transmetteur.
Your Warranty
1. This Friday Smart Lock (“Device”) is covered
by a two-year warranty (“Warranty”) from the
date of purchase (“Warranty Period”), on the
terms set out below.
2. By installing and/or using the Device, you are
agreeing to be bound by the terms of this
Warranty. If you do not agree to the terms of
this Warranty, our returns policy entitles you to
a refund upon receipt of the unused (in its
original condition and packaging) Device
within 30 days of the date of purchase (or the
return period stipulated by the place of
purchase, whichever is longer).
3. The Device must have been purchased
through our authorised distribution channels.
4. A proof of purchase shall be required when
submitting any claim under this Warranty.
5. This Warranty only covers defects in or to the
Device.
6. During the Warranty Period, we undertake to
rectify any and all defects in the Device
attributable to faulty workmanship, materials
and function (or at our discretion, replace the
Device or provide a full refund) provided that
the installation, use and maintenance
instructions are followed in full and provided
that the Exclusions set out below do not
apply.
7. Where there is a defect in your Device that may
come within this Warranty, please contact the
place where you purchased the Device
supplying them with your proof of purchase
and relevant contact details together with a
description of the defect. Your place of
purchase will provide these details to us and
an assessment will be made. There may be a
requirement for the Device to be returned to
us for a detailed assessment.
8. Following an assessment, if we determine that
the Device is defective and none of the
Exclusions set out below are applicable, we, at
our discretion, shall either repair or replace
the defective Device or refund the price of
the defective Device.
9. We do not accept liability for your costs of
dismantling, installation or carriage. Parts
that we have replaced become our property.
10. Exclusions – this Warranty does not cover
damage caused to the Device through:
• Normal wear and tear
• Improper installation
• Negligent care and maintenance
• Deliberate or accidental damage
• Continued use following notification of a
defect to your distributor or to us
• Improper initial and subsequent
operation
• Alternations or modifications to the
Device made by, or authorised by, the
customer
• External causes such as fire, water, salts,
alkaline solutions or acid, power
outages, internet problems
• Unauthorised repairs or repairs carried
out by unapproved persons
• Removing the product number or
making the Device unidentifiable
11. When a Device is repaired under this
Warranty, the remaining time left on this
Warranty will still be valid, but not extended.
On a replacement product, you will receive a
new warranty for the replacement Device
and this Warranty will become void.
12. This Warranty is non-transferable and
applies to Devices purchased in the United
Kingdom only.
13. This Warranty does not affect your statutory
rights.
14. This Warranty (and any disputes arising from
it) is governed by the law of England and
Wales.
Feel free to contact us whenever
you need to!
See if your question is answered at:
www.fridaylabs.net/support
Or email us directly at:
support@fridaylabs.net
8mm 5/16”
Contact
Loading...