Frico TAP16R Quick Manual

Quick guide TAP16R

Get started quickly and easily! Here you have a guide to the most important functions and
settings, an introduction to the energy saving programs and an overview of the menu
system.

Always read the full manual for complete product information.

Getting started Using the menu

This is what the display looks like when you rst
start TAP16R.

LED

Time

Day

Temp

Selected control

Start the menu

Navigate through
the options

Exit the menu*

Arrow buttons [ ]

Select button [ ]

*Or wait 30 secs and exit automatically.

Turning o and on Locking the keypad

To standby*

4 secs

*The heat is not being regulated. The clock is running
and the programming is saved in the memory.

Out of standby

4 secs

Navigate

Lock

4 secs

www.frico.se/en

Unlock

Basic settings

Time and date

To be able to use all the functions you need to set the time and date rst.

Navigate to the correct time*

*Repeat the last two steps to set minutes, day, month and
year. The correct day of the week is set automatically.

Desired temperature

TAP16R can control the temperature in three dierent ways: with the External sensor, Room sensor or the Room
sensor and external sensor in combination. If the External sensor is connected when the thermostat is switched on
for the rst time, this function is selected automatically. The Room sensor cannot be selected when the external
sensor is connected. For the Room sensor and external sensor in combination, the built-in sensor controls the
room temperature and the external sensor works as a temperature limiter. Learn more about control functions
and how to set them in the manual. You can always see the current temperature by following the description
above.

Show actual temperature

Lock buttons rst Temperature,

external sensor*

* If the thermostat is set to external sensor,
otherwise temperature in the room (R).