Freshtel 64xx, 74xx User Manual

Billion 64xx - 74xx

Configuration Guide

Minimum Requirements

Active Freshtel Internet Phone account (http://www.freshtel.net)•
Broadband internet connection (256/64 kbps minimum, ADSL required for 74xx series)•
Broadband modem (for Billion 64xx only)•
Analogue Telephone with RJ-11 line (desktop or cordless)•

Before You Begin

This guide will allow you to set up any Billion 74xx series VoIP modem/router or 64xx series VoIP
router for use with Freshtel. These include the Billion 7401, 7402, 7404 and 6404 models.

We strongly recommend you ensure that the latest rmware update for this device has been
downloaded and installed. For further information, visit the manufacturer’s website at
http://www.billion.com.au

If you are using the Firey softphone on your PC with the same Freshtel number that you wish to use
in your Billion, we advise you to uninstall or disable Firey. Your Freshtel account can only be active
at one point on our network at any one time, and having two identical active accounts will cause
conicts. Similarly, only register your Freshtel account on one line of the Billion, and not both lines.

If you do not yet have a Freshtel account, you should go to our website at http://www.freshtel.net
and register a new account before starting to congure the Billion.

Initial Setup

Before conguration, please refer to the Billion user guide for further information on how to connect
the device to your network.

If you require more advice, please contact your ISP for assistance with your ADSL connection or
contact Freshtel Customer Care via Firey on 81118111, or our landline number 1300 373 748 (1300
FRESHTEL).

Billion Configuration

Using your Internet Browser, type http://192.168.1.254, then press Enter to access the Billion’s
conguration webpage.

Figure 1.1

Figure 1.2

You should see a pop-up window requesting you to enter your Username and Password (making
sure you type them in lower case letters):

The default login is:

Username: admin
Password: admin

If you are experiencing difculty trying to connect to the device at this point, please refer to the
Billion user guide or contact Billion Technical Support for further assistance.

ATA/Router Setup

This section applies to Billion 64xx series VoIP routers only, such as the Billion 6404VGP. If you have
a Billion ADSL Modem/Router, such as the Billion 7401, 7402 or 7404VGP, move on to the
next page.

Figure 1.3

It is advisable to only have one router in your home network to avoid routing conicts. If you have a
Billion 6404 connected to another router or modem/router, you may wish to set the Billion 6404 to
operate in Analog Terminal Adapter (ATA) mode, rather than operating in VoIP router mode.

If you are unsure whether your Billion 6404 is connected to another router, please contact Freshtel
Customer Care via Firey on 81118111, or our landline number 1300 373 748 (1300 FRESHTEL).

VoIP Configuration

For more information regarding each property and option, please refer to the Billion user manual.

SIP Setup

Figure 1.4

1. Click on Configuration

2. Click on VoIP

3. Click on Wizard

4. Voice QoS
a. DSCP Marking Premium

5. Phone Port 1
a. SIP Service Provider Freshtel/Firefly
b. Phone Number Your Freshtel Number
c. Authentication Username Your Freshtel Number
d. Authentication Password Your Freshtel Password

6. Click Apply

Do not set up Phone Port 2 or select the ‘Same As Port 1’ checkbox unless you have two separate
Freshtel accounts. Each Freshtel account can only be active at one point on our network at any one
time, and setting up two identical accounts in your Billion will cause conicts.

General Setup

Figure 1.5

1. Click on General Settings

2. Under Sip Device Parameters
a. SIP Enable
b. Silence Suppression (VAD) Disable
c. Echo Cancellation Enable
d. RTP Port 5100
e. Region Australia
f. Voice QoS Premium

3. Setting for Phone Port 1
a. Registrar Address sip.freshtel.net
b. Registrar Port 5060
c. Expire 3600
d. User Domain/Realm (leave blank)
e. Outbound Proxy Address (leave blank)
f. Outbound Proxy Port 5060

General Setup - Advanced

Figure 1.6

1. Click Advanced (next to SIP Device Parameters)

2. Parameters
a. VoIP through IP Interface ipwan
b. Voice Frame Size 20ms

You may wish to increase Voice Frame Size to 30ms if you have a slower Broadband
connection.

Phone Port

1. Click on Phone Port

2. Click on Edit (for relevant account)

Figure 1.7

Figure 1.8

3. Under Login Account Configuration
a. Phone Number Your Freshtel Number
b. Authentication Username Your Freshtel Number
c. Authentication Password Your Freshtel Password
d. Confirm Password Your Freshtel Password
e. Display Name Your Freshtel Number

4. Codec Preference
a. Priority 1 G.729
b. Priority 2 PCMU (G.711 u-Law)
c. Priority 3 PCMU (G.711 a-Law)
d. DTMF Method RFC2833

VoIP Dial Plan

1. Select Port 1, and click Edit.

Figure 1.9

Figure 1.10

2. Click on VoIP Dial Plan

3. Click Edit for Port 1

4. Parameters
a. Enable Speed Dial
b. Enable Redial
c. Disable Return Call
d. Disable Don’t Disturb
e. Disable Blind Call Transfer
f. Disable Set The Number Of Speed Dial Code
g. Disable Phone Number +#

5. Click on Apply

6. Main Digit Sequence
a. *xxxxxxxx @ Current Profile

7. Click Apply

8. Click on Add

9. Main Digit Sequence
a. *xxx @ Current Profile

9. Click Apply

10. Click on Add

11. Main Digit Sequence
a. *xxxx @ Current Profile

12. Click Apply

13. Click on Add

14. Click Save Settings

Figure 1.11

Ring & Tone Configuration

1. Click on Ring & Tone

2. Country Specic Ring & Tone
a. Region Australia

3. Click on Apply

4. Click on Save Settings

5. Click on Restart Router. Select Current Settings when prompted. Your Billion will restart, and
you Freshtel account will be set up.

Making Your Call

Please refer to the following examples for making calls via your handset using the Billion.

Examples

FRESHTEL Number:

1. *8000 1234

Landline Number:

1. 61 3 9123 4567, or

2. 03 9123 4567, or

3. 9123 4567 (with local prex set to relevant state)

Mobile Number:

1. 61 412 345 678 (Drop the First Zero)

2. 0412 345 678 (works with and without local prex set)

National Numbers:

1. 1300 number:
a. 61 1300 123 456, or
b. 1300 123 456 (with local prex set to relevant state)

2. 1800 number:
a. 61 1800 123 456, or
b. 1800 123 456

3. 13 number:
a. 61 13 12 34, or
b. 13 12 34

International Numbers:

1. (Country Code) (Area Code) (Number)
a. Example: 44 708 12345678

Setting Local Call Prefix on Your Account

1. Log into your account at http://www.freshtel.net

2. Click on My Details

Figure 1.12

3. Click on Update my personal details

Figure 1.13

4. Scroll down to the Prefix section, and select from one of the following options
a. Not Specified No Prefix set
b. NSW, ACT 02
c. Queensland 07
d. SA, WA, NT 08
e. Victoria, Tasmania 03

Figure 1.14

5. Click on Update My Details

Glossary

BIT• - Binary Digit - Bits are widely used as a measurement for network transmission. One

hundred megabits per second means that 100 million pulses are transmitted per second.

Broadband• – Internet Connection that has a connection speed greater than 256kbps

downstream and 64kbps upstream.

Broadband Router• - A device that provides access to the Internet for multiple computers,

typically including a network switch with four or more Ethernet ports for wired connections to
desktop and laptop computers.

BYTE• – Binary Table - Another form of measurement to determine size and speed. 1 byte is

equivalent to 8 Bits, so for an internet connection of 256/64kbps (kilobits per second, kilo
meaning 100 units), it is roughly equivalent to 25 Kilobytes per second (download rate) and 6
kilobytes per second (upload rate).

Ethernet• – A type of cable which is used to interconnect network devices to allow

communication between them over the medium.

Firefly• – Freshtel Internet Telephone Software
Freshtel• – VoIP Internet Telephone Company
Kbps• – Kilobits Per Second is the measurement used to determine the bandwidth speed of an

internet connection.

Mbps• – Megabits Per Second – A unit of measurement used to show the capacity and/or rate of

speed for a particular medium in megabits.

MBps• – Megabytes Per Second - A unit of measurement used to show the capacity and/or rate

of speed for a particular medium in megabytes.

NAT• - Network Address Translation maintains and controls the separation of a public IP address

to one or more private IP addresses. Commonly used for internet connection sharing via a router.

USB• – Universal Serial Bus – A “Plug-and-Play” medium used to interconnect different types of

USB compatible devices to each other either via USB 1.1 (at 12Mbps maximum transfer rate), or
Hi-Speed USB 2.0 (at 480Mbps maximum transfer rate).

Wireless Broadband• – Same as broadband, however is a medium transmitted through radio

waves set at a certain radio frequency.

Windows XP• – Microsoft’s current Operating System platform for PC based systems.

E-Mail: [e-mail]

Support: 81118111 (Firey)

1300 FRESHTEL (Landline)

Last edited: 05/02/2008