Fresca FSP8001BS Installation Manual
©2013 Fresca ™ All rights reserved. This material may not be reproduced, displayed, modified or distributed without the express prior written permission of the copyright holder.
FSP8001
PAVIA
INSTALLATION GUIDE
PAGE 1
Parts List
For lnstallation Yon may Require
Please unpack and inspect all packages and components carefully,
make sure they are complete. Examine for shipping damage. If some
parts are damaged or missing, notify your dealer immediately.
6
Before assembly, flush the water
supply pipes thoroughly to
remove debris(allow the water to
run with the main stopcock open
for about 3 mins), otherwise dirt
particles might affect the function
of the shower panel!
Note!
©2013 Fresca ™ All rights reserved. This material may not be reproduced, displayed, modified or distributed without the express prior written permission of the copyright holder.
PAGE 2
Dimensions
Back View
Measure the distance from the upper fixing
hanger to the lower fixing hanger. The
dimensions are for your reference only.
"
5 3/4
"
46 7/8
"48
UPPER HANGING
BRACKET
LOWER HANGING
BRACKET
Recommended
height
Cold inlet
Hot inlet
SHOWERHEADMASSAGE JET
Choose a suitable place to install the shower
panel, adjust the shower panel’s vertical position
based on the user’s height and your sanitary room.
Usually, install the panels at the distance of
82 3/5 from the top to the ground, but you
can assemble according to your instance.
"
"7
"2
"2
"
7
The height can be altered to suit individual
requirements.
The dimensions are for reference only.
"70
"
15 1/4
"
59
"
"
23
7
82 3/5
Note!
"
"
8 1/2
"
18
©2013 Fresca ™ All rights reserved. This material may not be reproduced, displayed, modified or distributed without the express prior written permission of the copyright holder.
PAGE 3
Note!
Note!
Before drilling any holes for fixing your shower panel ensure that
there are no hidden cables or pipework within the wall.
Most of “Fresca” shower panels not only can be mounted on the tile,marble
or other flat wall, but also can be mounted against the wall corner.
COLD
HOT
Wall-mounting
6
mm Drill
Insert the wall plugs inside
the holes
Tighten the screws to the wall
with wall mounting brackets
1
2
3
wall wall wall
25
mm
Drill the holes in the wall
Your item may appear slightly different from the illustration
Hang the shower panel on the mounting bracket
Loading...