Page 1
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
TO−247
CASE 340L−02
ISSUE F
DATE 26 OCT 2011
N
A
K
F
2 PL
STYLE 1:
PIN 1. GATE
2. DRAIN
3. SOURCE
4. DRAIN
STYLE 5:
PIN 1. CATHODE
2. ANODE
3. GATE
4. ANODE
SCALE 1:1
−B−
123
G
D
3 PL
0.25 (0.010)MYQ
STYLE 2:
STYLE 6:
U
P
−Y−
W
PIN 1. ANODE
2. CATHODE (S)
3. ANODE 2
4. CATHODES (S)
PIN 1. MAIN TERMINAL 1
2. MAIN TERMINAL 2
3. GATE
4. MAIN TERMINAL 2
−T−
C
E
L
4
−Q−
0.63 (0.025)MTB
J
H
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
DIM MIN MAX MIN MAX
A 20.32 21.08 0.800 8.30
B 15.75 16.26 0.620 0.640
C 4.70 5.30 0.185 0.209
D 1.00 1.40 0.040 0.055
M
E 1.90 2.60 0.075 0.102
F 1.65 2.13 0.065 0.084
G 5.45 BSC 0.215 BSC
H 1.50 2.49 0.059 0.098
J 0.40 0.80 0.016 0.031
K 19.81 20.83 0.780 0.820
L 5.40 6.20 0.212 0.244
N 4.32 5.49 0.170 0.216
P --- 4.50 --- 0.177
Q 3.55 3.65 0.140 0.144
U 6.15 BSC 0.242 BSC
W 2.87 3.12 0.113 0.123
GENERIC
INCHESMILLIMETERS
MARKING DIAGRAM*
S
STYLE 3:
PIN 1. BASE
2. COLLECTOR
3. EMITTER
4. COLLECTOR
STYLE 4:
PIN 1. GATE
2. COLLECTOR
3. EMITTER
4. COLLECTOR
XXXXXXXXX
AYWWG
DOCUMENT NUMBER:
STATUS:
NEW STANDARD:
© Semiconductor Components Industries, LLC, 2002
October, 2002 − Rev. 0
DESCRIPTION:
98ASB15080C
ON SEMICONDUCTOR STANDARD
TO−247
http://onsemi.com
1
XXXXX = Specific Device Code
A = Assembly Location
Y = Year
WW = Work Week
G = Pb−Free Package
*This information is generic. Please refer to
device data sheet for actual part marking.
Pb−Free indicator, “G” or microdot “ G”,
may or may not be present.
Electronic versions are uncontrolled except when
accessed directly from the Document Repository. Printed
versions are uncontrolled except when stamped
“CONTROLLED COPY” in red.
Case Outline Number:
PAGE 1 OF 2
XXX
Page 2
DOCUMENT NUMBER:
98ASB15080C
PAGE 2 OF 2
ISSUE REVISION DATE
D CHANGE OF OWNERSHIP FROM MOTOROLA TO ON SEMICONDUCTOR. DIM A
25 AUG 2000
WAS 20.80−21.46/0.819−0.845. DIM K WAS 19.81−20.32/0.780−0.800. UPDATED
STYLE 1, ADDED STYLES 2, 3, & 4. REQ. BY L. HAYES.
E DIM E MINIMUM WAS 2.20/0.087. DIM K MINIMUM WAS 20.06/0.790. ADDED
26 FEB 2010
GENERIC MARKING DIAGRAM. REQ. BY S. ALLEN.
F ADDED STYLES 5 AND 6. REQ. BY J. PEREZ. 26 OCT 2011
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any
liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental
damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over
time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under
its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body,
or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death
may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees,
subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of
personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part.
SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
© Semiconductor Components Industries, LLC, 2011
Case Outline Number:
October, 2011 − Rev. 02F
340L
Loading...