How it Works
FREI
Loading...
FUNK 330N
Datasheet
3 pgs182.84 Kb0

FREI FUNK 330N Datasheet

Download
Page 1
5
Loose Taped
Fig.1
Fig.2
R.46
X2 CLASS (EN132400) - MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
SELF-HEALING PROPERTIES Typical applications: interference suppression and
«across-the-line» applications.Suitable for use in situations where failure of the capacitor would not lead to danger of electric shock.
PRODUCT CODE: R46
Insulated rigid leads Insulated flexible leads 0.5mm
∅ d 0.0
*See sizetable. All dimensions are in mm.
p 15 22.5p27.5
0.6 or 0.8* 0.8 1
2
p = 37.5
GENERAL TECHNICAL DATA Dielectric: polypropylene film.
Plates: metal layer deposited by evaporation under vacuum. Winding: non -inductive type. Leads: tinned wire. Protection: plastic case, thermosetting resin filled.
Box materialis solventresistant and flame retardantaccording to UL94 V0.
Marking : Manufacturer’slogo,series,capacitance,tolerance, rated voltage, capacitor class, dielectric code, climatic category, passive flammability category, manufacturing date code, approvals, manufacturing plant.
Climatic category: 40/110/56 IEC 60068-1 Operating temperature range: -40to+110_C
Related documents: IEC 60384-14, EN 132400. ELECTRICAL CHARACTERISTICS Rated voltage (V
): 275Vac/300Vac; 50/60Hz
R
Capacitance range: 0.01mFto5.6mF Capacitance values: E6 series (IEC 60063 Norm). Capacitance tolerances (measured at 1 kHz):
10% (K); 20% (M).
Dissipationfactor (DF):
tgδ×10
-4
at +25_C 5_C: ≤10 (6)*at 1kHz
* Typical value
Insulation resistance:
Test conditions
Temperature: +25_C5_C Voltage charge time: 1 min Voltage charge: 100 Vdc
Performance
≥1×105MΩ (5×105MΩ)*forC≤0.33mF ≥30000 s (150000s
)
*forC>0.33mF
* Typical value
Test voltage between terminations (on all pieces): 1500Vac for 1 s + 2200Vdc for 1 s at +25_C5_C
Note: R.46serieshasreplaced the1.40series and 1.47 series.
For new design we suggest the use of the R.46series.
TEST METHOD AND PERFORMANCE Damp heat, steady state:
Test conditions 1st
Temperature: +40_C2_C Relative humidity (RH): 93% 2% Test duration: 56 days
Test conditions 2nd
Temperature: +60_C2_C Relative humidity (RH): 95% 2% Test duration: 500 hours
Performance
Dielectric strength: no dielectric breakdown or
flashover at 4.3×VR(d.c.)/1 min Capacitance change |∆C/C|: ≤5% Insulation resistance: ≥50% of initial limit.
Endurance:
Test conditions
Temperature: +110_C2_C Test duration: 1000 h Voltage applied: 1.25×V
Performance
+1000Vac 0.1 s/h
R
Dielectric strength: no dielectric breakdown or
flashover at 4.3×V
(d.c.)/1 min
R
Capacitance change |∆C/C|: ≤10% Insulation resistance: ≥50% of initial limit.
Resistance to soldering heat:
Test conditions
Solder bath temperature: +260_C5_C Dipping time (withheat screen):10 s1s
Performance
Capacitance change |∆C/C|: ≤2%
Winding scheme
single sided metallized polypropylene film
115 01/2003
Page 2
Rated
Cap. (*)
Cap. (*)
0.010 mF 5.0 11.0 13.0 10.0 0.6 500 R46 - F 2100 - - M1 -
0.015 mF 5.0 11.0 13.0 10.0 0.6 500 R46 - F 2150 - - M1 -
0.022 mF 5.0 11.0 13.0 10.0 0.6 500 R46 - F 2200 - - M1 -
0.033 mF 5.0 11.0 13.0 10.0 0.6 500 R46 - F 2330 - - M1 -
0.047 mF 6.0 12.0 13.0 10.0 0.6 500 R46 - F 2470 - - M1 -
0.068 mF 6.0 12.0 13.0 10.0 0.6 500 R46 - F 2680 - - M1 -
0.1 mF 6.0 12.0 13.0 10.0 0.6 500 R46 - F 3100 - - M1 M
0.010 mF 5.0 11.0 18.0 15.0 0.6 400 R46 - I 2100 - - 01 -
0.015 mF 5.0 11.0 18.0 15.0 0.6 400 R46 - I 2150 - - 01 -
0.022 mF 5.0 11.0 18.0 15.0 0.6 400 R46 - I 2220 - - 01 -
0.033 mF 5.0 11.0 18.0 15.0 0.6 400 R46 - I 2330 - - 01 -
0.047 mF 5.0 11.0 18.0 15.0 0.6 400 R46 - I 2470 - - 01 -
0.068 mF 5.0 11.0 18.0 15.0 0.6 400 R46 - I 2680 - - 01 -
0.10 mF 5.0 11.0 18.0 15.0 0.6 400 R46 - I 3100 - - M1 M
0.10 mF 6.0 12.0 18.0 15.0 0.6 400 R46 - I 3100 - - 01 -
0.15 mF 6.0 12.0 18.0 15.0 0.6 400 R46 - I 3150 - - M2 M
0.15 mF 7.5 13.5 18.0 15.0 0.6 400 R46 - I 3150 - - M1 -
0.15 mF 9.0 12.0 18.0 15.0 0.6 400 R46 - I 3150 - - L2 -
0.22 mF 6.0 17.5 18.0 15.0 0.6 400 R46 - I 3220 - - 02 -
0.22 mF 7.5 13.5 18.0 15.0 0.6 400 R46 - I 3220 - - M2 M
0.22 mF 8.5 14.5 18.0 15.0 0.6 400 R46 - I 3220 - - M1 -
0.22 mF 9.0 12.5 18.0 15.0 0.6 400 R46 - I 3220 - - L2 -
0.33 mF 7.5 18.5 18.0 15.0 0.8 400 R46 - I 3330 - - 02 -
0.33 mF 10.0 16.0 18.0 15.0 0.8 400 R46 - I 3330 - - M1 -
0.33 mF 13.0 12.0 18.0 15.0 0.8 400 R46 - I 3330 - - 01 -
0.47 mF 11.0 19.0 18.0 15.0 0.8 400 R46 - I 3470 - - M1 -
0.15 mF 6.0 15.0 26.5 22.5 0.8 200 R46 - N 3150 - - 01 -
0.22 mF 6.0 15.0 26.5 22.5 0.8 200 R46 - N 3220 - - M1 -
0.33 mF 7.0 16.0 26.5 22.5 0.8 200 R46 - N 3330 - - M1 -
0.47 mF 8.5 17.0 26.5 22.5 0.8 200 R46 - N 3470 - - M1 -
0.47 mF 10.0 18.5 26.5 22.5 0.8 200 R46 - N 3470 - - 01 -
0.68 mF 10.0 18.5 26.5 22.5 0.8 200 R46 - N 3680 - - M2 -
0.68 mF 11.0 20.0 26.5 22.5 0.8 200 R46 - N 3680 - - M1 -
1.0 mF 13.0 22.0 26.5 22.5 0.8 200 R46 - N 4100 - - M1 -
0.47 mF 9.0 17.0 32.0 27.5 0.8 150 R46 - R 3470 - - 01 -
0.68 mF 9.0 17.0 32.0 27.5 0.8 150 R46 - R 3680 - - M1 -
0.68 mF 10.0 20.0 32.0 27.5 0.8 150 R46 - R 3680 - - 01 -
1.0 mF 11.0 20.0 32.0 27.5 0.8 150 R46 - R 4100 - - M1 -
1.5 mF 13.0 22.0 32.0 27.5 0.8 150 R46 - R 4150 - - M1 -
1.5 mF 15.0 24.5 32.0 27.5 0.8 150 R46 - R 4150 - - 01. -
2.2 mF 14.0 28.0 32.0 27.5 0.8 150 R46 - R 4220 - - M1 -
2.2 mF 18.0 33.0 32.0 27.5 0.8 150 R46 - R 4220 - - 01 -
3.3 mF 18.0 33.0 32.0 27.5 0.8 150 R46 - R 4330 - - M2 -
3.3 mF 22.0 37.0 32.0 27.5 0.8 150 R46 - R 4330 - - M1 -
4.7 mF 22.0 37.0 32.0 27.5 0.8 150 R46 - R 4470 - - M1 -
2.2 mF 13.0 24.0 41.5 37.5 1.0 100 R46 - W 4220 - - M1 -
3.3 mF 16.0 28.5 41.5 37.5 1.0 100 R46 - W 4330 - - M1 -
4.7 mF 19.0 32.0 41.5 37.5 1.0 100 R46 - W 4470 - - M1 -
5.6 mF 20.0 40.0 41.5 37.5 1.0 100 R46 - W 4560 - - M1 M
Ratedvoltage(K=275Vac, 3=300Vac) Mechanical version and packaging (Table 1)
Tolerance: K (10%); M (20%)
275/300Vac
B H L p (V/ ms)
∅∅∅∅ d
Max dv/dt at 390Vdc
Part Number
(*)C > 5.6 mF available upon request
E12 Series available upon request
All dimensions are in mm
R.46
X2 CLASS (EN132400) - MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
SELF-HEALING PROPERTIES
APPROVALS
(**)
(**)
ENEC-IMQ IEC 60384-14
CAN/CSA E 384-14-95
UL 1414 (upto1mF)
UL 1283 (310 Vac)
GB/T 14472-1998 (275Vac)
Class X2
Across-the-line
Across-the-line File No.E97797
Class X2 File No.E85238
Class X2 File No.pending
CSA and UL 1414 for 250Vac only. Approved according to IEC 60384 -14:1993+ A1:1995 (EN132400:1994+A2:1998+A3:1998+A4:2001). According to IEC 60065. (**)ENEC mark has replaced all the following European
National marks:
Table 1 (For more detailed information,please refer to page 16)
Standard
packaging style
AMMO-PACK 12.70 1 10.0/15.0 DQ AMMO-PACK 19.05 2 22.5 DQ
REEL ⊘355mm REEL ⊘500mm
Loose, shortleads Loose, long leads Loose, long leads
Loose, insulated rigid leads
Loose, insulated flexible leads
Lead
length
(mm)
04
25 30
30
150
Taping style Ordering
P
2
(mm)
12.70 1 10.0/15.0 CK
19.05 2 22.5/27.5 CK
+2
-1/+2
+5 +5
+5
Note:Ammo-pack is the preferred packaging for taped version.
TYPICAL GRAPHS
Z = f (f) (lead length 2 mm). Typical values.
Z[Ω ]
100
10
1
0.1
0.01
4.7 µF p37.5
0.001
0.1 1 10 100
1µF
p27.5
0.33 µF p 22.5
Fig.
(No.)
0.1 µF p15
File No.V4413
File No.1271537
(LR 83890)
Pitch (mm)
0.01 µF p10
(Digit 10 to
f[MHz]
code
11)
00 50 40
51
52
116
01/2003
Page 3
a
p
Loose Taped
Fig.1
Fig.2
R.46
X2 CLASS (EN132400) - MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
SELF-HEALING PROPERTIES Typical applications: interference suppression and
«across-the-line» applications.Suitable for use in situations where failure of thecapacitor would not leadto danger of electric shock.
PRODUCT CODE: R46
∅ d 0.05
*See sizetable. All dimensions are in mm.
p 15
0.6 or 0.8* 0.8
p = 22.5
GENERAL TECHNICAL DATA Dielectric: polypropylene film.
Plates: metal layer deposited by evaporation under vacuum. Winding: non -inductive type. Leads: tinned wire. Protection: plastic case, thermosetting resin filled.
Box material is solvent resistant and flame retardant according to UL94 V0. Marking : Manufacturer’s logo, series, capacitance, tolerance, rated voltage, capacitor class, dielectric code, climatic category, passive flammability category, manufacturing date code, approvals, manufacturing plant.
Climatic category: 40/125/56 IEC 60068-1 Operating temperature range: -40to+125_C Related documents: IEC 60384-14 2nd edition ’93;
EN 132400.
ELECTRICAL CHARACTERISTICS Rated voltage (V Capacitance range: 0.01mFto1mF
): 275Vac/300Vac; 50/60Hz
R
TEST METHOD AND PERFORMANCE Endurance:
Test conditions
Temperature: +125_C2_C Test duration: 1000 h
Voltage applied: 1.25×V
Performance
+1000Vac 0.1 s/h
R
Dielectric strength: no dielectric breakdown or
flashover at 4.3×V
(d.c.)/1 min
R
Capacitance change |∆C/C|: ≤10% Insulation resistance: ≥50% of initial limit.
APPROVALS
Class X2
Across-the-line
Class X2 File No.E85238
File No.CA08.00063
File No.1271537
(LR83890) pending
(*)
(*)
ENEC-IMQ IEC 60384-14
CAN/CSA E 384-14-95
UL 1283 (310 Vac)
CSA and UL 1414 for 250Vac only. Approved according to IEC 60384 -14:1993+ A1:1995 (EN132400:1994+A2:1998+A3:1998+A4:2001). According to IEC 60065.
NEW 125°C
Rated
C
.
Cap.
0.010 mF 5.0 11.0 13.0 10.0 0.6 500 R46 - F 2100 - - H1 -
0.015 mF 5.0 11.0 13.0 10.0 0.6 500 R46 - F 2150 - - H1 -
0.022 mF 5.0 11.0 13.0 10.0 0.6 500 R46 - F 2200 - - H1 -
0.033 mF 5.0 11.0 13.0 10.0 0.6 500 R46 - F 2330 - - H1 -
0.047 mF 6.0 12.0 13.0 10.0 0.6 500 R46 - F 2470 - - H1 -
0.068 mF 6.0 12.0 13.0 10.0 0.6 500 R46 - F 2680 - - H1 M
0.010 mF 5.0 11.0 18.0 15.0 0.6 400 R46 - I 2100 - - H1 -
0.015 mF 5.0 11.0 18.0 15.0 0.6 400 R46 - I 2150 - - H1 -
0.022 mF 5.0 11.0 18.0 15.0 0.6 400 R46 - I 2220 - - H1 -
0.033 mF 5.0 11.0 18.0 15.0 0.6 400 R46 - I 2330 - - H1 -
0.047 mF 5.0 11.0 18.0 15.0 0.6 400 R46 - I 2470 - - H1 -
0.068 mF 5.0 11.0 18.0 15.0 0.6 400 R46 - I 2680 - - H1 -
0.10 mF 6.0 12.0 18.0 15.0 0.6 400 R46 - I 3100 - - H1 -
0.15 mF 6.0 17.5 18.0 15.0 0.6 400 R46 - I 3150 - - H2 -
0.15 mF 9.0 12.5 18.0 15.0 0.6 400 R46 - I 3150 - - H3 -
0.15 mF 7.5 13.5 18.0 15.0 0.6 400 R46 - I 3150 - - H1 -
0.22 mF 8.5 14.5 18.0 15.0 0.6 400 R46 - I 3220 - - H1 -
0.22 mF 6.0 17.5 18.0 15.0 0.6 400 R46 - I 3220 - - H2 M
0.22 mF 9.0 12.5 18.0 15.0 0.6 400 R46 - I 3220 - - H3 M
0.22 mF 7.5 18.5 18.0 15.0 0.6 400 R46 - I 3220 - - H4 -
0.33 mF 10.0 16.0 18.0 15.0 0.8 400 R46 - I 3330 - - H1 M
0.33 mF 7.5 18.5 18.0 15.0 0.8 400 R46 - I 3330 - - H2 M
0.33 mF 13.0 12.0 18.0 15.0 0.8 400 R46 - I 3330 - - H3 M
0.47 mF 11.0 19.0 18.0 15.0 0.8 400 R46 - I 3470 - - H1 M
0.15 mF 6.0 15.0 26.5 22.5 0.8 200 R46 - N 3150 - - H1 -
0.22 mF 6.0 15.0 26.5 22.5 0.8 200 R46 - N 3220 - - H1 -
0.33 mF 7.0 16.0 26.5 22.5 0.8 200 R46 - N 3330 - - H1 -
0.47 mF 10.0 18.5 26.5 22.5 0.8 200 R46 - N 3470 - - H1 -
0.68 mF 11.0 20.0 26.5 22.5 0.8 200 R46 - N 3680 - - H1 -
1.0 mF 13.0 22.0 26.5 22.5 0.8 200 R46 - N 4100 - - H1 -
Rated voltage(K=275Vac, 3=300Vac) Mechanical version and packaging (Table 1)
Tolerance: K (10%); M (20%)
275/300Vac ∅∅∅∅ d
B H L p (V/ms)
E12 Series available upon request
All dimensions are in mm
For all other characteristics or performance see page 115.
Max dv/dt at 390Vdc
Part Number
(*)ENEC mark has replacedall the following European National marks:
117 01/2003
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use