Freewing Pandora F4301, Pandora F4302 User Manual
R
This manual covers all color schemes
Although it only shows one color scheme, the aircraft are the same
This manual is for reference to the actual product at the time it was written. We can't speak
for any future upgrades or improvements
R
Thank you for purchasing the Freewing Pandora 4 in 1 training aircraft! We're extremely
pleased to be able to provide you with this extremely popular multi-functional aircraft, just listen
to what you have purchased! First, the Pandora is a super stable and well thought out airplane,
but the thing that sets it apart is that you can fly it in high wing/ low wing tail dragger, or in high
wing/low wing tricycle landing gear configuration. Four planes in one! Changing over from high
to low wing and tricycle gear to tail dragger is quick and can easily be done right at the field!
The Pandora is completely capable of taking off from grass runways and even beaches!
Freewing has utilized EPO foam and carbon fiber reinforcement to take the punishment a
new pilot can inflict.
Although she is classified as a trainer, this is an airplane that you'll be flying long after your
skill set has let you move on to higher performance airplanes, just for the fun of it!
So, all set to assemble your new airplane? Let's get you in the air!
Basic specifications of the Freewing Pandora
Retractable landing gear
All the parts and pieces needed to fly in all four configurations are provided with this RTF,PNP aircraft kit. Ensure
that all the parts shown in the picture below have been provided with your kit.
R
Grub Screws
Grub Screws
Propeller back plate
Servo extension
cable
Servo Extension
cable
'Y' cord
'Y' cord
Spinner
Spinner
R
附件包 1
附件包 2
附件包 3
1
螺旋桨
3叶 11*6
1
1
2
3
4
5
7
2
2
1
1
1
6
6
3
4
4
PA 2.6*10mm
PA 3*10mm
PA 3*18mm
PWM 3*6mm
PT 1.7*14mm
机米螺丝
M4*4mm
螺丝
PA 2.3*8mm
1
2
3
4
5
7
8
6
9
10
11
13
14
12
整流罩
螺旋桨固定盘
起落 架固定塑料 件(左)
尾轮塑料件
舵面遥臂
舵面遥 臂固定片
Y
EVA尾轮
/
/
/
/
/
/
/
/
/
/
L=100mm
1.2mm
1.2mm
L=64mm
1
1
1
2
1
1
2
2
2
1
1
1
1
1
1
1
1
2
3
4
5
7
4
3
2
4
1
6
6
6
PA 2.6*10mm
PA 3*10mm
PA 3*18mm
PWM 3*6mm
PT 1.7*14mm
M4*4mm
PA 2.3*8mm
1
2
3
4
5
7
8
6
9
10
11
13
14
12
/
/
/
/
/
/
/
/
/
/
L=100mm
1.2mm
1.2mm
L=64mm
1
1
1
2
1
1
2
2
4
1
1
1
1
1
8
3.2mm
2
螺旋桨定位圈
2
6mm 5mm 4mm 3mm
4
螺丝
螺丝
螺丝
螺丝
螺丝
序号
配件名称
规格参数
数量
序号
配件名称
规格参数
数量
序号
配件名称
规格参数
数量
起落 架固定塑料 件(右)
夹头
主翼舵机钢丝
线
内六角扳手
螺丝刀
零件包 零件包1
机米螺丝
螺丝
螺丝
螺丝
螺丝
螺丝
螺丝
垫片
序号
配件名称
规格参数
数量
序号
配件名称
规格参数
数量
螺旋桨
3叶 11*6
序号
配件名称
规格参数
数量
整流罩
螺旋桨固定盘
起落 架固定塑料 件(左)
尾轮塑料件
舵面遥臂
舵面遥 臂固定片
EVA尾轮
起落 架固定塑料 件(右)
夹头
主翼舵机钢丝
线
内六角扳手
螺丝刀
零件包 零件包1
附件包 1
附件包 2
附件包 3
R
R
Assembly
Note:
1. Read the manual carefully before beginning assembly and make sure you understand each step in the
process. If you have any questions, contact your distributor, or contact us at freewing@szfreewing.com.
2. As a reference, this manual will assemble the airplane in the high wing tricycle landing gear
configuration as well as explain how to reconfigure the airplane afterwards.
3. Before assembly, please refer to P 18 for proper screw assignments.
Find the parts (see the photo) needed to install the
wing onto the fuselage.
Feed the servo wire through the hole in the center
section, then slip the carbon fiber rod into the round
hole in front of the wire hole and slide the rod up so
that the attachment points are visible through the
points on the wing. Make sure that the servo wires
are not pinched between the wing and the center
section.
Anchor the wing to the center section with the two
provided screws. Do not over tighten the screws!
Repeat these steps for the other wing.
Loading...