TRIM
INTRODUCTION
Congratulations on your purchasing
the Easy-Set Watch II. Designed for
easy operation, the watch
automatically tells you which button
to use in a setting procedure. The
watch has the following functions:
• Real-time calendar clock for home
time
• Second calendar clock for foreign time
• Dual daily alarms and hourly chimes
• Stopwatch with split function
• 10 preset countdown timers
The watch is also equipped with an EL
back light to facilitate time reading at
night or in dim light.
HOW TO USE THE BACK LIGHT
Press the LIGHT button once to turn
on the back light for three seconds.
DISPLAY MODES
The watch has four display modes:
home time (TIME), home time alarm
(ALM1), stopwatch (STW) and
countdown timer (TMR).
To change from one display mode to
another, press the S3 button once. The
mode description will appear for two
seconds before activating the selected
mode.
HOME AND FOREIGN DISPLAY
To display the foreign time, press S2
when the home time is displayed. The
mode description (TM-2) will appear
shortly before the foreign time is
displayed. To change back to the home
time, press S2.
To display the daily alarm for foreign
time, press S2 when the daily alarm
for home time is displayed. The mode
description (ALM 2) will appear shortly
before the foreign time alarm is
displayed.
HOW TO SET THE TIME AND DATE
1 Select time display using the S3
button.
2 Select home time or foreign time
using the S2 button.
3 Hold the S2 button for two seconds.
The SET message will appear
momentarily. The second digits will
blink.
4 Press the S1 button to reset the
second digits to 00.
5 Press the S3 button. The minute
digits will blink.
6 Use the S1 button to set the
minutes. Press the button once to
increase the digits by one unit or
speed up the process by holding
down the button.
7 Press the S3 button. The hour digits
will blink.
8 Use the S1 button to set the hours.
9 Follow the same pattern to set the
day-of-the-month,month, day-of-
the-week, hour format and date
format.For the hour format, you
can choose 12-hour display with P
indicator or 24-hour display. As for
the date format, you can choose M-
D (month-day) or D-M (day-month).
The chosen formats will apply to
both home and foreign settings.
10 Press the S2 button to confirm the
settings and return to current time
display.
HOW TO DISPLAY THE DATE
To display the date, press S1 when the
time is displayed. Press the button
again to go back to time display. The
watch will also do so automatically
after six seconds.
HOW TO SET THE DAILY ALARMS
1 Select alarm function using the S3
button.
2 Select home and foreign time alarm
using the S2 button.
3 Hold the S2 button for two seconds.
The SET message will appear. The
minute digits will blink.
4 Use the S1 button to set the
minutes.
5 Press the S3 button. The hour digits
will blink.
6 Use the S1 button to set the hours.
7 Press the S2 button to confirm and
exit.
HOW TO USE THE DAILY
ALARMS AND HOURLY CHIMES
To display the alarm time, select ALM
1 or ALM 2 mode using the S2 button
in alarm mode.
Use the S1 button to set the status of
the alarm and chime functions of the
chosen alarm. Press the button once
to activate the daily alarm. Press the
button again to activate the hourly
chime. Press the button a third time to
activate both functions. To deactivate
both, press the S1 button a fourth time.
The chime and alarm indicators will
appear when their respective functions
are active.
WHEN AN ALARM OR HOURLY
CHIME GOES OFF
A tune will go off by the hour if the hourly
chime function is activated and a 20second alarm tune will be emitted at the
designated time when the alarm is active.
To stop either tune, press any button.
To disable the functions, select ALM 1
or ALM 2 and use S1 button to turn off
the indicator of the function as desired.
HOW TO USE THE STOPWATCH
For a straight forward count-up,
1 Select stopwatch mode using the
S3 button. The last recorded time
of the stopwatch will be
displayed.Press the S2 button to
clear the old record.
2 Press the S1 button once to start
the stopwatch. The watch will start
counting from 00'00''00 if the watch
is cleared. Otherwise, it will pick
up from where it last left off. The
watch will count up to 59 minutes
and 59.99 seconds before starting
from zero again.
3 To stop counting, press the S1
button once. Press the button
again to resume from where it
left off. To clear the stopwatch,
press the S1 button to stop
counting and then press the S2
button.
The stopwatch is equipped with a
split function for you to keep track
of individual lap time. To use the
function,
1 While the stopwatch is running,
press the S2 button once
whenever you want to register a
lap. The stopwatch is still running
in the background. To display the
currently accumulated time,
press the S2 button.
2 Repeat the last step until you
have registered all the laps.
3 Press S1 to stop counting. Press
the button again to resume or
press the S2 button to clear.
Note: You can leave the stopwatch
running while switching over to other
operating modes. The STW indicator
will light up as a reminder.
HOW TO USE THE TIMER
To set the count down time,
1 Select timer mode using the S3
button. The last selected timer
setting will be displayed.
2 Use the S2 button to alter the
setting. You can select among 1,
3, 5, 10, 15, 20, 25, 30, 45 and 60
minutes.
To start a countdown, press the S1
button. Press the button again to stop
the countdown or a third time to
resume from where it left off.
After reaching zero on a countdown,
a 20-second beep will go off. To stop
the beeping, press any button. The
timer will reload automatically.
BATTERY INFORMATION
The watch uses a 3.0V lithium button
cell battery, which in normal
circumstances will be good for 1-2
years. However, the battery life will
vary due to shelf time and the
manner the watch is used.
FEATURES:
• CURRENT TIME
• DAY/MONTH/DATE
• TWO DAILY ALARM
• HOURLY CHIME
• STOPWATCH
• OPTIONAL 24-HR. TIME
• WATER RESISTANT TO
300FT/100M
• NIGHT VISION™
BACK LIGHT
KEY TO SYMBOLS
SHARK CLASSIC
FOLLOW THESE 8 TIPS TO GET THE
MOST OUT OF YOUR NEW WATCH!
1. Never Pull out the crown or operate
the pushers/buttons under water.
2. Make sure your crown is returned
to the original position before you
expose your watch to water.
3. If your watch is exposed to
saltwater it is very important to
wash it thoroughly under tap
water and wipe dry with a soft
cloth. Keep it clean!
4. Sever impacts or drops may affect
your watches water resistance and
performance.
5. Avoid exposing your Freestyle
watch to extreme temperatures
such as in a hot shower, Jacuzzi,
sauna or hot tub. The combination
of extreme heat and water may
cause your watch to lose some of
its water resistance.
6. Avoid exposing your watch to
chemicals, soaps or solvents as
they deteriorate the water resist
seals in your watch.
7. Never try to remove the caseback,
leave this to a certified watch
repair technician or Freestyle
service center. This will help in
preventing water leakage from
improper battery replacement.
8. It is advisable to have your watch
pressure tested annually and to
re-furbish your watch every 2-3
years to extend the life of the watch.
TWO YEAR LIMITED WARRANTY
Your Freestyle watch is warranted to
be free of defects in materials or
workmanship, under normal use, for
a period of two years from the date of
purchase. This limited warranty
excludes damage resulting from
improper care or handling, accidents,
modification, unauthorized repairs,
normal wear, or other causes which
are not defects in materials and
workmanship. If your watch is
defective, please send your watch to
the address below and include the
following:
1. A copy of your original receipt
2. The completed and signed Repair
Form
3. A money order payable to
Odyssey Time Inc. in the amount
of $8.50 for processing and
handling. If using a credit card;
be sure to include the name on
the card, the card number and
the expiration date
Odyssey Time Inc
30 East Pearce Street
Richmond Hill, Ontario
Canada, L4B 1B7
service@seikocan.com
Tel: 1-800-668-6571
905-763-1066
Please do not include any items of
personal value in your shipment.
If there is a covered defect, we will at
our option repair the defective part(s),
or replace the watch with the same
product (if available) or a similar
product of equal price. We reserve
the right to refuse either repair or
replacement (but not both) if the cost
of doing so would be disproportionate
to the defect. This limited warranty is
in place of all other express and
implied warranties of any kind, which
are hereby excluded. In no event shall
Freestyle be liable for direct, indirect,
incidental or consequential damages
arising out of the use of the watch,
and any recovery limited to the
purchase price. No other person or
company is authorized to change this
limited warranty, and your dealer is
solely responsible for any other
warranties. For non-warranty service,
contact the address below.
The Freestyle warranty extends only
to product purchased from an
authorized Freestyle retailer.
1-888-222-5230 ext.502
TRIM
SHARK CLASSIC-02
REPAIR FORM
30 East Pearce Street
Richmond Hill, Ontario
Canada, L4B 1B7
Money Order
Master Card
Visa
Name: _______________________
Address: ______________________
______________________________
______________________________
______________________________
______________________________
Telephone:_____________________
Credit Card Information
Credit Card Number:
______________________________
Name on Credit Card:
______________________________
Expiration Date:
______________________________
Signature:
______________________________
www.freestyleusa.com
visit our site
Loading...