BELLA
Model FS80982
Model FS80983
Model FS80984
FEATURES:
•
100 meters H2O
• Day/date
• EL backlight
• 10 lap memory chronograph
• Countdown timer
• Alarm
• Dual time
CONTROL BUTTONS
S1 – Start/lap Button
S2 – Stop/reset Button
S3 – Mode Button
S4 – Light Button
S1S4
S2S3
DISPLAY MODES
The watch has five display modes:
NORMAL TIME (TIME),
CHRONOGRAPH (Chro), RECALL
(RCL), ALARM (AL) and TIMER (TMR).
The change from one display mode to
another, press S3 button once.
TO SET THE TIME AND
CALENDAR
1. Press S3 button to select NORMAL
TIME mode.
2. Press S1 button to toggle between
NORMAL TIME mode and TIME 2
mode to set.
3. Press and hold S2 button for ar ound
2 seconds, the second digits will
blink.
4. Press S1 button to r eset the second
digits to 00.
5. Press S3 button once, the hour
digits will blink.
6. Press S1 to set the hour digits.
Holding down the button will speed
up the process.
7. Press S3 button once, the minute
digits will blink.
8. Press S1 button to set the minutes
digits.
9. Follow the same pattern to set the
day (of the week), year, month, date
and hour format.
10.To set the hour format, press S1
button to toggle between 12-hour
and 24-hour format. The P.M.
indicator may be displayed to
indicate the time period 12:00 A.M.
– 11:59 P.M. in 12-hour format.
11.After finish making all the settings,
press S2 button to confirm.
NOTE: The chosen hour format will
apply to both NORMAL TIME mode and
TIME 2 mode.
NOTE: In TIME 2 settings, only hours,
minutes, day, year, month and date
are open to setting.
TO USE THE CHRONOGRAPH
(STOP WATCH)
1. Press S3 button to select
CHRONOGRAPH mode.
2. The chronograph will then be
displayed in its current state – r eset,
running, or stopped.
3. To resume a counting, press S1
button to resume from where it left
off.
4. To start a new counting, reset the
chronograph to zero first.
Press S1 button to stop counting,
then press S2 button to reset
counter to zero.
For changing the chronograph display
format:
In CHRONOGRAPH mode,
1. Press S2 button to toggle between
SPLIT format and LAP format.
2. If SPLIT format is selected, the split
time (cumulative lap time) will be
displayed.
If LAP format is selected, the lap
time (individual lap time) will be
displayed.
For the measurement of elapsed time:
In CHRONOGRAPH mode,
1. Press S1 button to start counting.
2. To stop counting, press S2 button.
Press S1 button to resume from
where if left off.
3. To reset to zero, pres s S2 butt on t o
stop counting, then press S2 button
again to reset the counter to zero.
For the measurement of split time:
In CHRONOGRAPH mode,
1. Press S1 button to start counting.
2. While the chronograph is running,
press S1 button once to register a
lap.
3. Depends on the chronograph
display format selected, the
cumulative lap time (if SPLIT format
is selected) or the individual lap
time of the previous lap (if LAP
format is selected) will be displayed.
After around 5 seconds, the
currently accumulated time will be
displayed.
4. Repeat the last step until all the
laps have been registered.
5. To stop counting, press S2 button.
Press S1 button to resume from
where if left off.
6. To reset to zero, pres s S2 butt on t o
stop counting, then press S2 button
again to reset the counter to zero.
TO USE THE RECALL FUNCTION
1. Press S3 button to select RECALL
mode. The lap record of the pr evious
chronograph counting will be
displayed.
2. Press S1 button to cycle the first
nine to the last split/lap record.
3. Press S2 button to return to
CHRONOGRAPH mode.
NOTE: The lap record will be cleared
when chronograph is reset.
TO SET THE ALARM TIME
1. Press S3 button to select ALARM
mode.
2. Press S2 button toggle between
HOME ALARM (HOME) and TIME 2
ALARM (T2) to set.
3. Press and hold S2 button for ar ound
2 seconds, the hour digits will blink.
4. Press S1 button to set the hour
digits. Holding down the button will
speed up the process.
5. Press S3 button once, the minute
digits will blink.
6. Press S1 button to set the minute
digits.
7. After finishing making all the
settings, press S2 button to confirm.
NOTE: The alarm will automatically
be activated after being set.
TO TURN ON/OFF THE ALARM
AND HOURLY CHIME
In ALARM mode,
1. Press S2 button toggle between
HOME ALARM and TIME 2 ALARM
to set.
2. Press S1 button once to activat e the
hourly chime. Chime indicator
will appear.
3. Press again to activate the alarm.
Alarm indicator
4. Press the third time to activ ate both
functions. Both of the indicators will
appear.
5. Press the fourth time to deactivate
both functions. Both of the
indicators will disappear.
will appear.
WHEN AN ALARM OR HOURLY
CHIME GOES OFF
A beep will be emitted by the hour if
the hourly chime is activated.
An 20-second alarm tune will be
emitted at the designated time when
the alarm is activated. To s top the tune,
press any button.
TO SET THE TIMER
1. Press S3 button to select TIMER
mode.
2. Press and hold S2 button for ar ound
2 seconds, the hour digits will blink.
3. Press S1 button to set the hour
digits. Holding down the button will
speed up the process.
4. Press S3 button, the minute digits
will blink.
5. Press S1 button to set the minute
digits.
6. Press S3 button, the second digits
will blink.
7. Press S1 button to set the second
digits.
8. After finish making all the settings,
press S2 button to confirm.
TO USE THE TIMER
In TIMER mode,
1. Press S1 button to start counting.
2. To stop counting, press S2 button.
Press S1 button to resume from
where it left off.
3. To r el oad the timer, pr ess S2 button
to stop counting, and then press S2
button again.
4. After reaching zero in a countdo wn,
a tune will be emitted. To stop the
tune, press any button.
TO USE THE BACKLIGHT
Press S4 button to turn on the
backlight for 3-5 seconds.
OTHERS
In any setting procedure, if there is no
key manipulation for around 1-2
minutes, the watch will automatically
save the entered data and exit the
setting procedure.
3 ATM / 50 METERS / 100 FEET /
30 METERS H2O
5 ATM / 50 METERS / 165 FEET /
50 METERS H2O
10 ATM / 100 METERS / 330 FEET /
100 METERS H2O
20 ATM / 200 METERS / 660 FEET /
200 METERS H2O
Suitable for washing hands and light splashing
Suitable for light swimming. E.g.: Bathing in a pool or low
tide waters, but not suitable for diving
Suitable for most water sorts. E.g.: Swimming,
surfing and snorkeling, but not suitable for deep water diving
Suitable for most water sports including deep water diving
WATER RESISTANCE GUIDE
WATER RESISTANCE
SUITABLE ATMOSPHERE
FOLLOW THESE 8 TIPS TO GET THE
MOST OUT OF YOUR NEW WAT CH!
1. Never pull out the crown or operat e
the pushers/buttons under water.
2. Make sure your cr own is returned
to the original position before you
expose your watch to water.
3. If your watch is exposed to
saltwater it is very important to
wash it thoroughly under tap water
and wipe dry with a soft cloth.
Keep it clean!
4. Severe impacts or drops may
affect your watches water
resistance and performanc e.
5. Av oid e xposing your Freestyle
watch to extreme temperatures
such as in a hot shower, Jacuzzi,
sauna or hot tub. The combination
of extreme heat and water may
cause your watch to lose some of
its water resistance.
6. Avoid exposing your watch to
chemicals, soaps or solvents as
they deteriorate the water resist
seals in your watch.
7. Never try to remove the c aseback,
leave this to a certified watch r epair
technician or Freestyl e servic e
center. This will help in prev enting
water leakage from impr oper
battery replacement.
8. It is advisable t o hav e your wat ch
pressure tes t ed annuall y and to
re-furbish your watch every 2-3
years to extend the life of the watch.
LIMITED LIFETIME WARRANTY
Freestyl e U.S.A. warrants, t o the
original purchaser, that its watches
are free fr om def ects in mat erials
and workmanship for the lifetime
of the watch (under normal use)
from date of original purchase.
The following are not c ov ered under
warranty: battery, strap/bracelet/
band and crystal.
Accidental breakage or damage
due to normal wear or misuse of
the product, including but not limited
to the mathematical accuracy of
the product, is not cover ed under
this warranty. Some st ates do not
allow limitations on how long an
implied warranty lasts, or the
exclusions of or limitations on
consequential damages, so the
above limitation may not apply to
you. This warranty gives you
specific legal rights, and you may
have other rights, which vary from
state to state.
Under this warranty FREESTYLE
will make any necessary repair s, if
applicable, at no cost to you the
consumer. Any repair needed that
is not under warranty will be at the
cost of you the consumer. Pr oof
of purchase and / or original receipt
it needed to validate your warranty.
Your warranty is v oided by any
servicing out by a non-authorized
agent. Any other form of guarantee
to you by the retailer is his / her
responsibility . This warr anty applies
to watches purchased in the United
States. For watches pur chased
outside the United States, please
contact you authorized
FREESTYLE dealer for warranty
information.
TRIM