Free Spirit Free SpiritC249 30107 0, C249 30107 0, 16216594 Owner's Manual

MAG. RECUMBENT CYCLE
Retain for Future reference
CAUTION: You must read and understand this owner’s manual before operating unit.
OWNER`S
MANUAL
Model No.
C249 30107 0
16216594
Free Spirit
Recumbent Cycle
Assembly
Operation
Exercise
Parts
Warranty
©2009
1
MANUFACTURE’S ONE-YEAR LIMITED WARRANTY
Your FREE SPIRIT Recumbent Bike is warranted for one year from the date of purchase
against defects in material, when used for the purpose intended, under normal conditions, and provided is receives proper care. Any part found defective or missing will be sent at no cost when returned in accordance with the terms of this warranty.
This warranty is not transferable and is extended only to the original owner.
The warranty shall not apply to exercise cycles units which are (1) used for commercial or other income producing purposes, or (2) subject to misuse, neglect, accident or unauthorized repairs and alterations.
This warranty provided herein is in lieu of all other express warranties. Any implied warranties, including any implied warranties of merchantability or fitness for particular purpose, are limited in duration to the first 12 months from the date of purchase. All other obligations or liabilities, including liability for consequential damages, are hereby excluded.
REPAIR PARTS AND SERVICE
All of the parts for the RECUMBENT BIKE, shown in figure can be ordered from Maurice Pincoffs Canada Inc. 6050 DON MURIE STREET, NIAGARA FALLS, ONTARIO L2E 6X8. When ordering parts, the parts will be sent and billed at the current prices. Prices may be subject to change without notice. Check or money order must accompany all orders.
Standard hardware items are available at your local hardware store.
To ensure prompt and correct handling of any errors, or to answer any questions, please call our Toll Free number: 1-888-707-1880, or local number 1-905-353-8955 or fax 1-905-353-8968 or email customerservice@pincoffs.ca Office hours are from 8:30 AM to 5:00 PM Monday to Friday Eastern Standard Time.
Always include the following information when ordering parts
z Model Number z Name of Each Part z Part Number of Each Part
TABLE OF CONTENTS
WARRANTY 1 MONITOR INSTRUCTIONS 12-13 SAFETY PRECAUTIONS 2 TROUBLE SHOOTING 14 PRE-ASSEMBLY CHECK LIST 3 TRAINING GUIDELINES 15-17 HARDWARE PACKING LIST 4 STRETCHING 18-19 ASSEMBLY INSTRUCTION 5-8 ORDERING REPLACEMENT PARTS 20 DIAGRAM & PARTS LIST 9-11 SERVICE AND PARTS 21
©2009
2
SAFETY PRECAUTIONS
Thank you for purchasing our product. Even though we go to great efforts to ensure the quality of each product we produce, occasional errors and /or omissions do occur. In any event should you find this product to have either a defective or a missing part please contact us for a replacement.
This product has been designed for home use only. Product liability and guarantee conditions will not be applicable to products being subjected to professional use or products being used in a gym center.
This exercise equipment was designed and built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipment. Be sure to read the entire manual before assembly and operation of this machine. Also, please note the following safety precautions:
1. Read the OWNER’S OPERATING MANUAL and all accompanying literature and follow it carefully before using your cycle.
2. If dizziness, nausea, chest pains, or any other abnormal symptoms are experienced while using this equipment, STOP the workout at once. CONSULT A PHYSICIAN IMMEDIATELY.
3. Inspect your exercise equipment prior to exercising to ensure that all nuts and bolts are fully tightened before each use.
4. The cycle must be regularly checked for signs of wear and damage. Any part found defective must be replaced with a new part from the manufacturer.
5. Fitness equipment must always be installed on a flat surface, It is recommended to use an equipment mat to prevent the unit from moving while it is being used, which could possibly scratch or damage the surface of your floor.
6. No changes must be made which might compromise the safety of the equipment.
7. It is recommended to have a minimum of 2’ safe clearance around the exercise equipment while in use.
8. Keep children and pets away from this equipment at all times while exercising.
9. Warm up 5 to 10 minutes before each workout and cool down 5 to 10 minutes afterward. This allows your heart rate to gradually increase and decrease and will help prevent you from straining muscles.
10. Never hold your breath while exercising. Breathing should remain at a normal rate
in conjunction with the level of exercise being performed
11. Always wear suitable clothing and footwear while exercising. Do not wear loose fitting clothing that could become entangled with the moving parts of your cycle.
12. Care must be taken when lifting or moving the equipment, so as not to injure your back. Always use proper lifting techniques.
13. User weight should not exceed 265 lbs.
WARNING: BEFORE BEGINNING ANY EXERCISE PROGRAM CONSULT YOUR PHYSICIAN. THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE AGE OF 35 OR PERSONS WITH PRE-EXISTING HEALTH PROBLEMS. READ ALL INSTRUCTIONS BEFORE USING ANY FITNESS EQUIPMENT. WE ASSUME NO RESPONSIBILITY FOR PEROSNAL INJURY OR PROPERTY DAMAGE SUSTAINS BY OR THROUGH THE USE OF THIS PRODUCT.
©2009
3
PRE-ASSEMBLY CHECK LIST
PART NO. DESCRIPTION Q’TY
1 Main Frame 1
2 Front Post 1
3/32 Front Stabilizer w/transportation wheels 1
4/34 Rear Stabilizer w/ adjustable end caps 1
13 Computer 1
6 Pedals w/strap 2
8 Handlebar 1
11 Back Cushion 1
5 Rear Support Tube 1
10 Seat Support Bracket 1
12 Seat Cushion 1
Inner box 1
Manual 1
©2009
4
HAREWARE PACKING LIST
NO. Description Drawing QTY
9 Locking knob
1
14 Carriage bolt M10 x 75
4
15 Arc Washer φ10 x 25
4
16 Domed Nut M10
4
17 Allen Bolt M8 x16
14
19 Flat Washer φ8 x φ20
6
24 Arc Washer φ8 x φ20
4
55 Flat Washer φ6 x 17
8
65 Allen Screw M6 x 35
8
66 Allen Key L6
1
67 Allen Key L4
1
68 Allen Wrench S13,17
1
Above described parts are all the parts you need to assemble this machine. Before you start to assemble, please check the hardware packing to make sure they are included.
©2009
5
ASSSEMBLY INSTRUCTION
This manual is designed to help you easily assemble, adjust and use this machine. Please read this manual carefully. For the sake of familiarizing yourself with the parts identified in the instruction, first study the overview drawing.
Set all parts in a clear area on the floor and remove the packing material. Refer to the parts list for help to identify the parts.
It will take two people to assemble your unit.
Step 1
Attach the front stabilizer (3) w/transportation wheels (32) to the main frame (1). Secure using two carriage bolts (14), two arc washers (15) and two domed nuts (16).
Step 2
Attach the right and left pedal straps (6SR/6SL) to the right and left pedals (6R/6L). Note: The end with four adjustable holes must be set outwards.
Attach the right and left pedals (6R/6L) to the right and left crank arms (18). Note: The pedals and crank arms are marked with R & L. The right pedal (R) should be threaded on clockwise and the left pedal (L) should be threaded counter-clockwise.
©2009
6
Step 3
a) Connect tension control w/cable (20) to the extension tension cable (21),. b) Connect the extension sensor wire (29) to the sensor wire (25). c) Connect the upper pulse wire (7) to the front extension pulse wire (22). d) Attach the front post (2) to the main frame (1). Secure using four allen head bolts (17)
and four arc washers (24). e) Connect upper pulse wire (7) to the back of the computer (13). f) Connect the extension sensor wire (29) to the back of the computer (13).
g) Slid the monitor (13) onto the bracket of the front post (2). Secure using two screws
(23).
NOTE: Before attaching the computer to the front post, please ensure the wires are safely
tucked inside the opening of the handlebar post. This will ensure that the computer slides on easily and avoids pinching the wire.
Loading...
+ 15 hidden pages