Freescale Semiconductor TWR-MEM Quick Start Guide

TWR-MEM

Memory Module

TOWER SYSTEM Quick Start Guide for TWR-MEM

TOWER SYSTEM

Get to know the TWR-MEM

Primary
Connector

MRAM

CPLD

SD Card
Connector
(underside)

Compact
Flash Socket

Secondary
Connector

TWR-MEM
Freescale Tower System

The TWR-MEM module is part of the Freescale Tower System,
a modular development platform that enables rapid prototyping and tool
re-use through reconfigurable hardware. Take your design to the next
level and begin constructing your Tower System today.

How to build your Tower

TOWER SYSTEM

Locate the Elevator modules,

STEP

1

identifiable by the four card

edge connectors on each.

Identify each Elevator

STEP

2

module as either “Functional”

or “Dummy” (written on

the outward facing

side of the board).

Locate the other modules you

STEP

3

will use in your Tower System.

Identify the “primary” and

STEP

4

“secondary” card edges for

each module (written along

the edge).

Plug the “primary” card edge

STEP

5

of each module into the

“functional” elevator.

Place the remaining “dummy”

STEP

6

or “functional” Elevator module

onto the “secondary” card

edges.