Freescale Semiconductor Logic Zoom ColdFire LITE Series, Logic Zoom ColdFire LITE M5484EVB, Logic Zoom ColdFire LITE M5474EVB Quick Start Manual

™

Zoom

ColdFire Development Kit

ColdFire LITEKIT QuickStart Guide

developed by

Zoom™ ColdFire Lite Development Kit QuickStart Guide Logic PN: 1000331

REVISION HISTORY

REV EDITOR REVISION DESCRIPTION APPROVAL DATE

Eric Harnisch

A

James Wicks Pilot Release JAW 8/31/04

Nathan Kro

B

James Wicks Corrected ‘Section 5: Jumper/ Switch Table’ ELH 4/11/05

Please check www.logicpd.com for the latest revision of this manual, product change notifications, and
additional application notes.

This file contains source code, ideas, techniques, and information (the Information) which are Proprietary and Confidential
Information of Logic Product Development, Inc. This information may not be used by or disclosed to any third party except under
written license, and shall be subject to the limitations prescribed under license.

No warranties of any nature are extended by this document. Any product and related material disclosed herein are only furnished
pursuant and subject to the terms and conditions of a duly executed license or agreement to purchase or lease equipments. The
only warranties made by Logic Product Development, if any, with respect to the products described in this document are set forth in
such license or agreement. Logic Product Development cannot accept any financial or other responsibility that may be the result of
your use of the information in this document or software material, including direct, indirect, special or consequential damages.

Logic Product Development may have patents, patent applications, trademarks, copyrights, or other intellectual property rights
covering the subject matter in this document. Except as expressly provided in any written agreement from Logic Product
Development, the furnishing of this document does not give you any license to these patents, trademarks, copyrights, or other
intellectual property.

The information contained herein is subject to change without notice. Revisions may be issued to advise of such changes and/or
additions.

© Copyright 2002, Logic Product Development, Inc. All Rights Reserved.

Zoom ColdFire Lite QuickStart Guide

i

Table of Contents

1 Introduction ..........................................................................................................................................1

1.1 Zoom ColdFire LITE Development Kit Features ............................................................................1

2 Getting Started .....................................................................................................................................2

2.1 Unpacking the System.................................................................................................................... 2

2.2 CD-ROM Contents.......................................................................................................................... 3

2.3 Development PC Requirements.....................................................................................................3

2.4 Mini ITX Lite Baseboard Connection Diagram ............................................................................... 4

2.5 P&E Shielded BDM Interface Connection Diagram .......................................................................5

3 QuickStart............................................................................................................................................. 6

3.1 Inserting the Fire Engine into the Mini-ITX Lite Baseboard............................................................ 6

3.2 Connecting the Mini-ITX Lite Baseboard to your PC...................................................................... 7

3.3 Power Supply..................................................................................................................................7

4 Test Drive the Zoom ColdFire LITE Development Kit ...................................................................... 8

4.1 Terminal Emulation Installation ......................................................................................................8

4.2 Power-up the Development Kit....................................................................................................... 8

4.2.1 dBUG ROM Monitor Power-up................................................................................................ 9

4.2.2 LogicLoader (bootloader/monitor) Power-up........................................................................... 9

4.3 Using the Development Kit with the P&E ColdFire LITE BDM Interface...................................... 10

4.3.1 Using the BDM with the GNU Cross Development Toolchain .............................................. 10

4.4 Sample Application....................................................................................................................... 12

5 Jumper/Switch Table ......................................................................................................................... 13

6 Product Notices ................................................................................................................................. 14

7 Product Registration .........................................................................................................................14

8 Ordering Information ......................................................................................................................... 15

8.1 Zoom ColdFire LITE Development Kits........................................................................................ 15

8.2 Fire Engine Configurations ........................................................................................................... 15

8.3 Zoom ColdFire LITE Display Kits .................................................................................................15

9 Support ............................................................................................................................................... 16

9.1 Frequently Asked Questions ........................................................................................................16

9.2 Technical Discussion Group......................................................................................................... 16

10 Zoom Display Kits.............................................................................................................................. 17

10.1 Zoom Display Kits Specification Table ......................................................................................... 17

11 Fire Engine CPLD Important Notice.................................................................................................18

12 Troubleshooting................................................................................................................................. 19

13 Warranty Statement ........................................................................................................................... 19

ii

Zoom ColdFire QuickStart Guide

Congratulations on your purchase of the Zoom ColdFire LITE Development Kit. The Zoom
ColdFire LITE Development Kit provides a product-ready software and hardware platform for
evaluating the functionality of the ColdFire LITE processor and Fire Engine. This results in an
embedded product development cycle with less time, less cost, less risk… more innovation.

1 Introduction

1.1 Zoom ColdFire LITE Development Kit Features

 Common Features

 Fire Engine Included (64MB DDR, 4MB Boot Flash)
 PC Card Expansion One PCI 2.2 slot (32 Bit, 33 or 66MHz, 3.3V)
 Serial Ports One 115.2kbps RS-232 serial ports; Two TTL serial ports
 Can 2.0b One port (MCF5485 only)
 USB USB 2.0 One High speed device (on Fire Engine)
 SPI
 RTC
 Network Support One RJ45 Ethernet jack connectors (application/debug)

 Cables

 Serial cable (null modem)
 5 volt power supply with power adapters
 Ethernet Crossover
 Parallel Extension Cable (for BDM interface)

 BDM Interface
 Software

 LogicLoader™ (bootloader/monitor)
 Freescale dBUG ROM Monitor
 Third party development tools and software wrapped in individual CDs
 Cygwin and GNU Cross Development Toolchain

 Mechanical Mini-ITX

 6.7” (170mm) long x 6.7” (170mm) wide x 1.3” (33mm) high

* Third Party Software available from Freescale

Zoom ColdFire Lite QuickStart Guide

1

2 Getting Started

2.1 Unpacking the System

The Zoom ColdFire LITE Development Kit is comprised of the following items:

■ Mini-ITX LITE Baseboard

■ Fire Engine

■ CD ROM (See CD ROM Contents Section)

■ Serial Cable

■ BDM Interface

■ Ethernet crossover cable

■ Parallel extension cable

■ 5 volt power supply with power adapters (US, UK, EUR, and Japan)

■ Warranty Card

■ QuickStart Guide

■ Packing List

■ Third party development tools and software wrapped in individual CDs

Note: Avoid touching the MOS devices. Static discharge can and will damage these devices.

Once you have verified that all the items are present, remove the board from its protective jacket
and anti-static bag. Check the board for any visible damage and ensure that there are no broken,
damaged, or missing parts.

Figure 2.1 – Kit Contents

2

Zoom ColdFire QuickStart Guide

2.2 CD-ROM Contents

 Product Documentation

 Fire Engine and Zoom ColdFire LITE Development Kit product briefs
 Bill of Materials (.pdf format) for Fire Engine and Mini-ITX LITE Baseboard
 Schematics (.pdf format) for Fire Engine and Mini-ITX LITE Baseboard
 MCF547x/MCF548x Fire Engine Hardware Specification
 MCF547x/MCF548x Fire Engine CPLD Specification, see section 11
 Zoom ColdFire LITE User’s Manual
 Fire Engine Design Guideline Application Note
 Zoom ColdFire LITE Development Kit QuickStart Guide
 LogicLoader User’s Manual

 Software Development Tools

 Tera-Term serial emulation program
 Cygwin and GNU Cross Development Toolchain
 Sample applications

 References, Resources, and Support

 Freescale Technical Information Center (TIC) www.freescale.com
 Logic FAQ, Technical Discussion Group
 Support Packages

 Product Registration & Downloads

2.3 Development PC Requirements

 General

 Pentium processor or equivalent
 64 MB RAM minimum
 1 Gigabyte free hard disk space
 115200 baud capable RS-232 port (COM port)
 Tera Term serial emulation program (or equivalent)

Zoom ColdFire Lite QuickStart Guide

3

2.4 Mini ITX Lite Baseboard Connection Diagram

4

Figure 2.2 – Connection Diagram for the ITX Baseboard

Connection Diagram Details

1. CAN Port

2. Serial Port

3. Ethernet Ports

• Ethernet Port 1 (top in this image)

• Ethernet Port 0 (bottom in this image)

4. ATX Power Connector

5. 5V Power In -- use appropriate power adaptor

6. System Reset Button

7. PCI Connector

8. Power On LED

:

Important Note: The ITX baseboard is a common assembly board for all ColdFire LITE Development Kits and may

contain peripheral connectors that are not supported by the Fire Engine purchased.

Zoom ColdFire QuickStart Guide