Freescale Semiconductor LFSTBEB7660 Quick Start Guide

Accelerometer Development Board

LFSTBEB7660 Quick Start Guide

SENSOR TOOLBOX

STEP

Unpack the board.

1

Verify package contents
according to the kit Web site:

http://www.freescale.com/
sensortoolbox

Assemble the hardware by connecting a
development board to the interface board.
This board is intended for use paired
with an Accelerometer Interface Board,
purchased separately. More information
can be found on the Web site.

STEP

Go to http://www.

2

freescale.com/
sensortoolbox and download

the latest version of software
by clicking the link.

All Sensor Toolbox kits use the same
software and driver, so the install only
needs to be done once. During the install
of the software follow the on screen

instructions to install the communication
driver for the tool. Check back
occasionally for software updates.

STEP

Plug in the USB and

3

turn the board on using
the power switch. Run the
Sensor Toolbox link on your
desktop and enjoy!

For other compatible kits visit

http://www.freesacle.com/sensortoolbox

SENSOR TOOLBOX

Accelerometer Development Board

Power LED

Reset Switch

Learn more at www.freescale.com/sensortoolbox

Freescale and the Freescale logo are trademarks or registered
trademarks of Freescale Semiconductor, Inc. in the U.S. and other
countries. All other product or service names are the property of
their respective owners. © Freescale Semiconductor, Inc. 2009.

Doc Number: LFSBEB7660ACCQSG / REV 0
Agile Number: 926-78335 / REV A

Freescale MMA7660FC

3 x 3 x 0.9 mm DFN

Freescale

MC9S08QE8CWL