Freescale Semiconductor LFSTBEB3110 Quick Start Guide

Sensor Toolbox

Magnetometer Development Board

LFSTBEB3110 Quick Start Guide

1 2

Unpack the Kit

• Unpack the board. Verify package
contents according to the kit website:

freescale.com/sensortoolbox.

• Assemble the hardware by connecting
the development board to the USB
interface board. Both of these board
types have a small arrow to indicate
where to connect. See the image below.
More information can be found at

freescale.com/sensortoolbox.

Download Latest Software

• Download the latest version at

freescale.com/sensortoolbox.

• This kit uses the sensor toolbox
software. Follow the on-screen
instructions to install the communication
driver for the tool. Check back
occasionally for software updates.

3

Power Up

• Plug in the USB and turn the board
on using the power switch.

• Run the sensor toolbox link on
your desktop.

• Explore other sensor kits at

freescale.com/sensortoolbox.

Xtrinsic

Sensor Toolbox

Quick Start Guide for i.MX50

Magnetometer Development Board

Freescale MAG3110

3-axis Magnetometer

2 x 2 x 0.85 mm DFN Package

Interface Board

*Orderable separately as LFSTBUSB.
If ordered under RD4247MAG3110, the USB
board is included.

Learn more at freescale.com/sensortoolbox

Freescale and the Freescale logo are trademarks of Freescale
Semiconductor, Inc., Reg. U.S. Pat. & Tm. Off. Xtrinisic is a
trademark of Freescale Semiconductor, Inc. All other product
or service names are the property of their respective owners.
© 2011 Freescale Semiconductor, Inc.

Doc Number: M AG3110QSG / REV 1
Agile Number: 926-78566 / REV B

MMA8451Q 14-bit

3-axis Accelerometer

3 x 3 x 1.0 QFN Package

On/Off Switch

* Sensor

Toolbox USB

Communication

Board