Freescale Semiconductor HVP-KV10Z32 Quick Start Manual
HVP-KV10Z32
Quick Start Guide
Freescale Controller Card
High–Voltage
Development
Platform
2
HVP-KV10Z32
High-Voltage Development Platform
The Freescale High-Voltage Development Platform is a set of software and
hardware tools for evaluation and development of high-voltage motor control
and power conversion algorithms. It is ideal for rapid prototyping of highvoltage microcontroller-based applications.
Quick Start Guide
Get to Know the HVP-KV10Z32
Figure 1: HVP-KV10Z32
MKV10Z32
MCU
Isolated Power
Supply
USB Mini for Communication,
Debugging and Power Supply
OpenSDA
JTAG
Target Reset/
Bootloader
Enable
Open SDA
Primary
Interface
SWD Isolator
Main Board
Interface
3
freescale.com
Introduction to HVP-KV10Z32
High-Voltage Development Platform
The HVP-KV10Z32 controller card is a development board for the Kinetis KV1x family
which in combination with one of HVP-MC3PH High-Voltage Development Platform
provides ready-made software and hardware development for high-voltage motor control
and power conversion applications.
This Quick Start Guide will teach you to:
• Easily program precompiled examples for the KV1x MCU.
• Learn about HVP-MC3PH high voltage motor control development platform.
• Spin the 3-phase PMSM motor of the HVP-MC3PH module while monitoring the motor
with the FreeMASTER tool
HVP-KV10Z32 Controller Card Features
• Accommodates Target MKV10Z32VLF7 MCU (ARM® Cortex®-M0+ 75 MHz, 32 KB
flash, 2x12-bit ADCs, 3x FlexTimer, 48 LQFP)
• SWD isolation up to 5KV
• Programmable OpenSDA1 debug interface with Micro USB connector and virtual serial port
• Galvanic isolation
• Design optimized for low noise
• On-board isolated power supply, allowing safe debugging
• Controller card allows stand-alone operation
Tools Required
• IAR Embedded Workbench V7.20.5.7624 or higher
• Freescale FreeMASTER for real-time debug monitoring and data visualization
1
Refer to the OpenSDA User Guide available at freescale.com
Loading...