
SENSOR TOOLBOX
Pressure Sensor Development Board
DEMOSTBMPL3115A2 Quick Start Guide
1
Unpack the Kit
• Unpack the board. Verify package
contents according to the kit website:
freescale.com/sensortoolbox.
• Assemble the hardware by connecting
the development board to the USB
interface board. Both of these board
types have a small arrow to indicate
where to connect. See the image below.
More information can be found at
freescale.com/sensortoolbox.
Xtrinsic
2
Download Latest Software
• At freescale.com/sensortoolbox
download the latest software version.
• All Sensor Toolbox kits use the same
software and driver, so the install only
needs to be done once. Follow the
on-screen instructions to install the
communication driver for the tool. Check
back occasionally for software updates.
3
Turn It On
• Plug in the USB and turn the board on
using the power switch.
• Run the Sensor Toolbox link on
your desktop.
• Explore other sensor kits at
freescale.com/sensortoolbox.

SENSOR TOOLBOX
Quick Start Guide for i.MX50
Pressure Sensor Development Board
Standard Connector for All
Sensor Toolbox Pressure
Sensor Development Boards
Sensor
Interface
Board
MPL3115A2
3 x 5 x 1.1 mm
LGA Package
LFSTBUSB
Communication Board
USB Mini-b
Connector
Power
Switch
KITSTBMPL3115A2
Development Board
Learn More at freescale.com/sensortoolbox
Freescale and the Freescale logo are trademarks of Freescale
Semiconductor, Inc., Reg. U.S. Pat. & Tm. Off. Xtrinisic is a
trademark of Freescale Semiconductor, Inc. All other product
or service names are the property of their respective owners.
© 2011 Freescale Semiconductor, Inc.
Doc Number: D EMOMPL3115A2 QSG / REV 0
Agile Number: 926-78612 / REV A