Freescale MC7448THX1000Nx, MC7448THX1267Nx, MC7448THX1400Nx, MC7448THX1700LD, PPC7448THX1000Nx Technical Data
...
查询MC7448THX1000NX供应商
Freescale Semiconductor
Technical Data
Document Number: MPC7448ECS02AD
Rev. 2, 04/2007
MPC7448 Hardware Specifications
Addendum for the
MC7448T
This document describes part-number-specific changes to
recommended operating conditions and revised electrical
specifications, as applicable, from those described in the
general MPC7448 RISC Microprocessor Hardware
Specifications. The MPC7448 is a PowerPC™
microprocessor built on Power Architecture™ technology.
Specifications provided in this document supersede those in
the MPC7448 RISC Microprocessor Hardware
Specifications, Rev. 3 or later, for the part numbers listed in
Table A only. Specifications not addressed herein are
unchanged. Because this document is frequently updated,
refer to the website on the back page of this document or to
your Freescale sales office for the latest version.
xxnnnnmx
Series
Freescale Part Numbers Affected:
MC7448T H X 1000Nx
MC7448T H X 1267Nx
MC7448T H X 1400Nx
MC7448T H X 1700LD
PPC7448THX1000Nx
PPC7448THX1267Nx
PPC7448THX1400Nx
Note that headings and table numbers in this document are
not consecutively numbered. They are intended to
correspond to the heading or table affected in the general
hardware specification.
Part numbers addressed in this document are listed in
Table A.
© Freescale Semiconductor, Inc., 2007. All rights reserved.
General Parameters
Table A. Part Numbers Addressed by This Data Sheet
Operating Conditions
Freescale
Part Number
MC7448THX1000Nx 1000 1.0 V ± 50 mV –40 to 105 Modified core frequency and voltage to reduce
MC7448THX1267NC 1267 1.1 V ± 50 mV
MC7448THX1267ND 1267 1.05 V ± 50 mV
MC7448THX1400Nx 1400 1.15 V ± 50 mV
MC7448THX1700LD 1700 1.3 V +20/-50 mV
PPC7448THX1000Nx
PPC7448THX1267NC
PPC7448THX1267ND
PPC7448THX1400Nx
Note:
1. The P prefix in a Freescale part number designates a “Pilot Production Prototype” as defined by Freescale SOP 3-13. These
parts have only preliminary reliability and characterization data. Before pilot production prototypes can be shipped, written
authorization from the customer must be on file in the applicable sales office acknowledging the qualification status and the
fact that product changes may still occur as pilot production prototypes are shipped.
2See Section 5.1, “DC Electrical Characteristics,” for information regarding V
CPU
Frequency
(MHz)
1
1000 1.0 V ± 50 mV
1
1267 1.1 V ± 50 mV
1
1267 1.05 V ± 50 mV
1
1400 1.15 V ± 50 mV
T
V
DD
2
2
j
(•C)C)
power consumption, extended operating
temperature.
Significant Differences from
Hardware Specifications
specifications for 1400 MHz device.
DD
4 General Parameters
Core power supply 1.3 V (1700L MHz revision level D devices)
1.15 V (1400N MHz devices)
1.1 V (1267N MHz revision level C devices)
1.05 V (1267N MHz revision level D devices)
1.0 V (1000N MHz devices)
Note: See Section 5.1, “DC Electrical Characteristics,” for information regarding VDD
specifications for 1400 MHz device.
5.1 DC Electrical Characteristics
Table 4 provides the recommended operating conditions for the MPC7448 part numbers described here.
NOTE
Table 4 describes the nominal operating conditions of the device. For
information on the operation of the device at supported derated core voltage
conditions, see Section 5.3, “Voltage and Frequency Derating.”
MPC7448 Hardware Specifications Addendum for the MC7448Txxnnnnmx Series, Rev. 2
2 Freescale Semiconductor
General Parameters
Table 4. Recommended Operating Conditions
Recommended Value
Characteristic Symbol
1000N MHz
Core supply voltage V
PLL supply voltage AV
Die-junction temperature T
Notes:
1. These are the recommended and tested operating conditions. Some speed grades in addition support voltage derating; see
Section 5.3, “Voltage and Frequency Derating.” Proper device operation outside of these conditions and those specified in
Section 5.3, “Voltage and Frequency Derating,” is not guaranteed.
2. This voltage is the input to the filter discussed in Section 9.2.2, “PLL Power Supply Filtering,” in the hardware specifications
and not necessarily the voltage at the AV
3. VDD and AVDD may be reduced in order to reduce power consumption if further maximum core frequency constraints are
observed. See Section 5.3, “Voltage and Frequency Derating,” for specific information.
DD
DD
j
1.0 V
± 50 mV
1.0 V
± 50 mV
–40to105 –40to105 –40to105 –40to105 –40to105 •CC
DD
1267N MHz
Revision
Level C
1.1 V
± 50 mV
1.1 V
± 50 mV
pin, which may be reduced from VDD by the filter.
3
1267N MHz
Revision
Level D
± 50 mV
± 50 mV
1.05 V
1.05 V
3
1
1400N MHz31700L MHz
1.15 V
± 50 mV
1.15 V
± 50 mV
1.3 V
+20/-50 mV
1.3 V
+20/-50 mV
Unit Notes
V
V2
Table 7 provides the power consumption for the MPC7448 part numbers described by this document; see
Section 11.1, “Part Numbers Addressed by This Specification,” for more information. The MPC7448
RISC Microprocessor Hardware Specifications presents guidelines on the use of these parameters for
system design. For information on power consumption when dynamic frequency switching is enabled, see
Section 9.8.5, “Dynamic Frequency Switching (DFS),” in the hardware specifications.
The power consumptions provided in Table 7 represent the power consumption of each speed grade when
operated at the rated maximum core frequency (see Table 8). Freescale sorts devices by power as well as
by core frequency, and power limits for each speed grade are independent of each other. Each device is
tested at its maximum core frequency only. (Note that Deep Sleep Mode power consumption is
independent of clock frequency.) Operating a device at a frequency lowe r than its rated maximum is fully
supported provided the clock frequencies are within the specifications given in Table 8, and a device
operated below its rated maximum will have lower power consumption. However, inferences should not
be made about a device’ s power consumption based on the power specifications of another (lower) speed
grade. For example, a 1400 MHz device operated at 1267 MHz will not exhibit the same power
consumption as a 1267 MHz device operated at 1267 MHz.
NOTE
The power consumption information in this table applies when the device
operates at the nominal core voltage indicated in Table 4. For power
consumption at derated core voltage conditions, see Section 5.3, “Voltage
and Frequency Derating.”
MPC7448 Hardware Specifications Addendum for the MC7448Txxnnnnmx Series, Rev. 2
Freescale Semiconductor 3
Loading...