Freequency PMR-505TX Instruction Manual

PMR 446 TRANSCEIVER

INSTRUCTION MANUAL

www.ttikorea.co.kr

Thank you for purchasing Freequency radio.

All our products are built to offer excellent value by
combining advanced features, great design and
manufacturing quality.
To ensure you are familiar with the operation and features
of your radio and in order to obtain the best performance,
please read this manual carefully before operation.

LCD Display

Neck Strap

Ring

Microphone

Lamp /

Monitor Button

PTT Button

Call Button

Up Button

Down Button

Speaker

Mode Button

Scan /

Lock Button

Charging
Terminal

Accessory /

Charger Jack

Power Button

Antenna

CONTENTS

4
5
5
5
6

7
7
8
9

1.

2.

3.

4.

5.

Caution
Equipment and Accessories Supplied
Fitting the Batteries
Battery Charging
Radio Control

1)

2)

3)

4)

5)

6)

7)

8)

9)

10)

11)

12)

13)

14)

15)

16)

Volume Level
Channels
Privacy Codes (CTCSS)
Dual Watch
Hands Free (VOX) mode
Roger Beep
Key Beep
Room Monitor
Call Alert
Monitor
Display Backlight
Key Lock
Channel Scan
Privacy Code Scan/Decode
Battery Warning
Power Save

6.

7.

8.

9.

1)

2)

3)

4)

5)

6)

7)

8)

6
6
6
6
6
6
6
7

9
9
9

9
10
10
11
11
11
12
12
12
12
13
13
13

LCD Display
Basic Radio Operation
Function Mode
Radio Features Explained

POWER Button
PTT Button
UP Button
DOWN Button
MODE Button
LAMP / MONITOR Button
CALL Button
SCAN / LOCK Button

11.

12.

13.

14.

14
14
15
15

Troubleshooting
CE Declaration
Safety Requirements
Technical Specifications

IMPORTANT - READ ALL INSTRUCTIONS carefully
and completely before operating your radio and retain
this manual for future reference.
NEVER connect the radio to a power source other than
the supplied battery. This may damage your product.
NEVER operate your radio with the antenna less than
5cm from exposed parts of the body.
NEVER use the radio in or near a mining facility or
other area which uses remotely triggered explosives
or an area labelled "Blasting Area".
NEVER use or charge your radio in a potentially
explosive atmosphere.

DO NOT place your radio in front of a vehicle airbag.
DO NOT operate your radio on board an aircraft.
DO NOT use your radio with a damaged antenna.
DO NOT attempt to modify your radio in any way.
ALWAYS charge your radio at normal room

temperature.
ALWAYS switch off your radio where notices restrict
the use of two-way radio or mobile telephones.
ALWAYS replace the accessory jack cover
(if applicable) when the jack is not in use.
ONLY use TTI approved rechargeable batteries with
the supplied charger.
AVOID exposing your radio to water. It is not
waterproof.

AVOID storing or charging your radio in direct sunlight.
AVOID storing or using your radio where temperatures

are below -20ºC or above +60ºC.

1. Caution

4

1) PMR-505TX radio (with internal battery)

2) Instruction Manual

3) Smart Twin Charger with Adaptor

2 units
1 unit
1 unit

2. Equipment and Accessories Supplied

The PMR-505TX uses an internal Lithium Ion or Lithium Ion
Polymer battery which has been pre-installed.
For removal or replacement please contact your local dealer.
Unauthorised attempts to remove or replace the battery will
void your warranty and may damage your product.

3. Fitting the Batteries

To charge your radios, carefully follow these instructions.

4. Battery Charging

Charge Cradle

Adaptor Power
Plug

Power Adaptor

- Input: 150VAC

- Output: 9VDC

LED

1) Charger Installation

Connect the power adaptor to the mains power supply and
connect the adaptor power plug to the charger cradle.
The LED's are turned off.

2) Radio Cradling & Charging

Remove all radio accessories and insert your radios in the
charging compartment until you hear locking sound. The LED's
will light red and the radios will start charging. If the LED's blink
in red and green or the LED's do not light red, try again cradling
your radios until the LED's light red.

3) Charging Completed

The battery charging time is typically 12 to 15 hours. When the
battery is fully charged the charger LED's will light green.

5