Freenotes Harmony Park FEEH1022 Installation & Assembly

PEGASUS

3

47

"

4

INSTALLATION GUIDE

7

18

"

8

FREENOTES HARMONY PARK

194 BODO DRIVE, UNIT F
DURANGO CO 81303
TEL: [phone]
FAX: [phone]
WWW.FREENOTESHARMONYPARK.COM

PROPRIETARY AND CONFIDENTIAL

THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
FREENOTES HARMONY PARK. ANY
REPRODUCTION IN PART OR AS A
WHOLE WITHOUT THE WRITTEN
PERMISSION OF FREENOTES HARMONY
PARK IS PROHIBITED.

43" Adult

39" Ages 7-11

34" Ages 5-7
29" Ages 3-5

Main Features:

(LH) A Minor / (RH) C Major Pentatonic

•
Recycled HDPE Frame

•
Anodized Aluminum Bars & Resonators

•
Stainless Steel Hardware

•

Contents:

SHEET 2 - Parts List and Instrument to Post Installation

•
SHEET 3 - In Ground Installation

•
SHEET 4 - Surface Mount Installation

•

Weights:

Instrument Weight, 49lbs.

•
Boxed Instrument Weight, 60lbs.

•
Boxed Posts Weight, 35-72lbs.

•

Pegasus - Installation Guide

TITLE:

REVISION: B

SCALE: 1:16

DATE: 2/9/2018

SHEET 1 OF 4

PEG-INSTALL

DWG. NO.

Parts List:

ITEM NO.

1
2

3
4
5
6
7
8

9
10
11
12
13
14

Step 1:

predrilled. Screw heads should be flush with the Holster surface when properly installed. Holster should also be flush along the
back. Drive Screws slowly to prevent stripping.

PART DESCRIPTION

Pegasus Instrument Assembly

Small SS Holster

In Ground Recycled Post, 72"lg.

In Ground Steel Post, 72"lg.

Surface Mount Recycled Post, 36"lg.

Surface Mount Steel Post, 36"lg.

Surface Mount Base, For Recycled Post

#8 Flat Head Screw, .5"lg. SS, T15 tamp

#8 Button Head Screw, 1.25"lg. SS, T15 tamp

#10-24 Button Head Machine Screw, 1"lg. SS, T25 tamp

5/16" Hex Head Lag Bolt, 5"lg. SS

3/8"-16 Wedge Expansion Anchor, SS

35/64" Hex Nut Cap

Security Driver

In Ground -

Recycled Post/QTY.

1 1 1 1
2 2 2 2

2

-

- -

- - -

- -

8 8 8 8

10

-

- -

- -

- -

1 1 1 1

In Ground -

Steel Post/QTY.

- - -

2

-

10

Surface Mount

Recycled Post/QTY.

- -

2

2

10

­4
8 8
8 8

Surface Mount

Steel Post/QTY.

-

2

-

-

10

-

Start by mounting the Holsters to the Instrument Back with the provided #8 Flat Head Screws and Driver. The Back comes

FREENOTES HARMONY PARK

194 BODO DRIVE, UNIT F
DURANGO CO 81303
TEL: [phone]
FAX: [phone]
WWW.FREENOTESHARMONYPARK.COM

PROPRIETARY AND CONFIDENTIAL

THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
FREENOTES HARMONY PARK. ANY
REPRODUCTION IN PART OR AS A
WHOLE WITHOUT THE WRITTEN
PERMISSION OF FREENOTES HARMONY
PARK IS PROHIBITED.

Step 2:

With two people, situate the Instrument with Holsters installed onto the Posts. Posts come predrilled and/or tapped. Fasten the
Instrument to the Posts with the provided #8 Button Head Screw for Recycled Posts or #10-24 Button Head Machine Screw for
Steel Posts. Drivers are provided.

1

9/10

8

DETAIL B

SCALE 1 : 4

DETAIL A

SCALE 1 : 4

2

PEG-INSTALL

Parts List and Instrument to Post Installation

TITLE:

REVISION: B

SCALE: 1:16

DATE: 2/9/2018

DWG. NO.

SHEET 2 OF 4

Step 1:

Excavate two 10" diameter holes, 36" deep, and 32" on center at the installation location. Contractor can modify Post to

desired height.

Post Length = Frost Depth

(36" Recommended)

+ Finished Post Height

Finished Post Height Guideline: (

Step 2:

Step 3:

With two people, lower the Posts with the Instrument attached into the excavated holes.

Verify the correct placement, levelness, and finished height of the Instrument. Check for sufficient clearance around the

Ages 3-5, 22"

) (

Ages 5-7, 27"

) (

Ages 7-11, 32"

) (

Adult, 36"

)

Instrument, a 36" perimeter around the Instrument is recommended for wheelchair accessibility.

Step 4:

Last pour concrete around the posts. It is recommended to brace the Instrument to hold it rigid while the concrete cures.

Leave to set according to the concrete manufacturers guidelines. Approximately (6) 80lb. bags will be needed.

1

3/4

FREENOTES HARMONY PARK

194 BODO DRIVE, UNIT F
DURANGO CO 81303
TEL: [phone]
FAX: [phone]
WWW.FREENOTESHARMONYPARK.COM

PROPRIETARY AND CONFIDENTIAL

THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
FREENOTES HARMONY PARK. ANY
REPRODUCTION IN PART OR AS A
WHOLE WITHOUT THE WRITTEN
PERMISSION OF FREENOTES HARMONY
PARK IS PROHIBITED.

Ground Level

32" On

Center

Finished Post Height

Post Length

Frost Depth

In Ground Installation

TITLE:

REVISION: B

SCALE: 1:16

DATE: 2/9/2018

SHEET 3 OF 4

PEG-INSTALL

DWG. NO.

Step 1:

Standard height for Surface Mount Posts are 36". The Recycled Posts may be modified in the field to the following heights:

(

Ages 3-5, 22"

) (

Ages 5-7, 27"

) (

Ages 7-11, 32"

) (

Adult, 36"

The height of Surface Mount Steel Posts can not be adjusted.

)

Step 2:

Determine installation location. Verify concrete footing is a minimum of 48" long x 24" wide x 6" thick. If the concrete pad is at
an angle, steel washers are required to act as shims (Shims not provided). If there is not already an existing pad, approximately
(7) 80lb. bags will be needed. Allow concrete to cure per concrete manufacturers guidelines.

Step 3 (Recycled Post Only):

the Posts. The Bases should fit snuggly around the Posts. Fasten them together with the provided

Step 4:

With two people place the Instrument Assembly with Posts attached onto the concrete pad and mark the center of the holes

Install the Surface Mount Bases to the bottom of the Posts. Align the holes on the Bases with the holes on

5/16" Hex Head Lag Bolt

on the surface mount bases. After you have made your marks, set aside the Instrument in order to drill for anchor holes. With a
hammer or rotary drill, drill through concrete at marked locations. Drill to a minimum depth of 4". A 3/8" masonry drill bit will be
needed.

Step 5:

Place the Instrument back over the drilled out holes. Insert provided anchor bolts into aligned holes. Position anchor nut so that
it is flush with the top of the bolt. Pound anchor bolts into the hole until the anchor washer is flush with the surface mount bases.
Tighten anchor bolts until they are snug. Cover remaining bolt sections with provided nut caps.

Step 6:

Verify the correct placement, levelness, and finished height of the Instrument.
Check for sufficient clearance around the Instrument, a 36" perimeter around
the Instrument is recommended for wheelchair accessibility.

Step 7:

If installing onto wet concrete, us the wet set anchor manufacturers
guidelines for installation procedures.

s.

FREENOTES HARMONY PARK

194 BODO DRIVE, UNIT F
DURANGO CO 81303
TEL: [phone]
FAX: [phone]
WWW.FREENOTESHARMONYPARK.COM

PROPRIETARY AND CONFIDENTIAL

THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
FREENOTES HARMONY PARK. ANY
REPRODUCTION IN PART OR AS A
WHOLE WITHOUT THE WRITTEN
PERMISSION OF FREENOTES HARMONY
PARK IS PROHIBITED.

1

13

12

DETAIL C

SCALE 1 : 6

3/8" Drill Diameter

to a Depth of 4"

Concrete Pad

48"

5/6

24"

6"

Surface Mount Installation

TITLE:

REVISION: B

SCALE: 1:16

DATE: 2/9/2018

SHEET 4 OF 4

PEG-INSTALL

DWG. NO.