MELODY
3
23
"
4
INSTALLATION GUIDE
16"
FREENOTES HARMONY PARK
194 BODO DRIVE, UNIT F
DURANGO CO 81303
TEL: (970) 375-7825
FAX: (970) 247-0856
WWW.FREENOTESHARMONYPARK.COM
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
FREENOTES HARMONY PARK. ANY
REPRODUCTION IN PART OR AS A
WHOLE WITHOUT THE WRITTEN
PERMISSION OF FREENOTES HARMONY
PARK IS PROHIBITED.
43" Adult
39" Ages 7-11
34" Ages 5-7
29" Ages 3-5
Main Features:
C Major Diatonic
•
Recycled HDPE Frame
•
Anodized Aluminum Bars
•
Stainless Steel Hardware
•
Contents:
SHEET 2 - Parts List and Instrument to Post Installation
•
SHEET 3 - In Ground Installation
•
SHEET 4 - Surface Mount Installation
•
Weights:
Instrument Weight, 18lbs.
•
Boxed Instrument Weight, 25lbs.
•
Boxed Instrument Post Weight, 20-36lbs.
•
Melody - Installation Guide
TITLE:
REVISION: B
SCALE: 1:16
DATE: 2/9/2018
SHEET 1 OF 4
MELD-INSTALL
DWG. NO.
Parts List:
ITEM NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Step 1:
PART DESCRIPTION
Melody Instrument Assembly
Small SS Holster
In Ground Recycled Post, 72"lg.
In Ground Steel Post, 72"lg.
Surface Mount Recycled Post, 36"lg.
Surface Mount Steel Post, 36"lg.
Surface Mount Base, For Recycled Post
#8 Flat Head Screw, .5"lg. SS, T15 tamp
#8 Button Head Screw, 1.25"lg. SS, T15 tamp
#10-24 Button Head Machine Screw, 1"lg. SS, T25 tamp
5/16" Hex Head Lag Bolt, 5"lg. SS
3/8"-16 Wedge Expansion Anchor, SS
35/64" Hex Nut Cap
Security Driver
In Ground -
Recycled Post/QTY.
1 1 1 1
1 1 1 1
1
-
- -
- - -
- 4 4 4 4
5
-
- -
- -
- 1 1 1 1
Start by mounting the Holster to the Instrument Back with the provided #8 Flat Head Screws and Driver. The Back comes
In Ground -
Steel Post/QTY.
- - -
1
-
5
Surface Mount -
Recycled Post/QTY.
- -
1
1
5
2
4 4
4 4
predrilled. Screw heads should be flush with the Holster surface when properly installed. Holster should also be flush along the
back. Drive Screws slowly to prevent stripping.
Surface Mount -
Steel Post/QTY.
-
1
-
-
5
-
FREENOTES HARMONY PARK
194 BODO DRIVE, UNIT F
DURANGO CO 81303
TEL: (970) 375-7825
FAX: (970) 247-0856
WWW.FREENOTESHARMONYPARK.COM
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
FREENOTES HARMONY PARK. ANY
REPRODUCTION IN PART OR AS A
WHOLE WITHOUT THE WRITTEN
PERMISSION OF FREENOTES HARMONY
PARK IS PROHIBITED.
Step 2:
With two people, situate the Instrument with Holster installed onto the Post. Posts come predrilled and/or tapped. Fasten the
Instrument to the Post with the provided #8 Button Head Screw for Recycled Posts or #10-24 Button Head Machine Screw for
Steel Posts. Drivers are provided.
1
9/10
2
8
DETAIL A
SCALE 1 : 4
Parts List and Instrument to Post Installation
TITLE:
REVISION: B
SCALE: 1:16
DATE: 2/9/2018
MELD-INSTALL
DWG. NO.
SHEET 2 OF 4
Step 1:
Excavate one 10" diameter hole, 36" deep, at the installation location. Contractor can modify Post to desired height.
Post Length = Frost Depth
(36" Recommended)
+ Finished Post Height
Finished Post Height Guideline: (
Step 2:
Step 3:
With two people, lower the Post with the Instrument attached into the excavated hole.
Verify the correct placement, levelness, and finished height of the Instrument. Check for sufficient clearance around the
Ages 3-5, 22"
) (
Ages 5-7, 27"
) (
Ages 7-11, 32"
) (
Adult, 36"
)
Instrument, a 36" perimeter around the Instrument is recommended for wheelchair accessibility.
Step 4:
Last pour concrete around the post. It is recommended to brace the Instrument to hold it rigid while the concrete cures.
Leave to set according to the concrete manufacturers guidelines. Approximately (3) 80lb. bags will be needed.
1
FREENOTES HARMONY PARK
194 BODO DRIVE, UNIT F
DURANGO CO 81303
TEL: (970) 375-7825
FAX: (970) 247-0856
WWW.FREENOTESHARMONYPARK.COM
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
FREENOTES HARMONY PARK. ANY
REPRODUCTION IN PART OR AS A
WHOLE WITHOUT THE WRITTEN
PERMISSION OF FREENOTES HARMONY
PARK IS PROHIBITED.
Ground Level
3/4
Finished Post Height
Post Length
Frost Depth
In Ground Installation
TITLE:
REVISION: B
SCALE: 1:16
DATE: 2/9/2018
SHEET 3 OF 4
MELD-INSTALL
DWG. NO.
Step 1:
Standard height for Surface Mount Posts are 36". The Recycled Post may be modified in the field to the following heights:
(
Ages 3-5, 22"
) (
Ages 5-7, 27"
) (
Ages 7-11, 32"
) (
Adult, 36"
The height of Surface Mount Steel Posts can not be adjusted.
)
Step 2:
Determine installation location. Verify concrete footing is a minimum of 24" long x 24" wide x 6" thick. If the concrete pad is at
an angle, steel washers are required to act as shims (Shims not provided). If there is not already an existing pad, approximately
(4) 80lb. bags will be needed. Allow concrete to cure per concrete manufacturers guidelines.
Step 3 (Recycled Post Only):
the Post. The Base should fit snuggly around the Post. Fasten them together with the provided
Step 4:
With two people place the Instrument Assembly with Post attached onto the concrete pad and mark the center of the holes
Install the Surface Mount Base to the bottom of the Post. Align the holes on the Base with the holes on
5/16" Hex Head Lag Bolt
on the surface mount base. After you have made your marks, set aside the Instrument in order to drill for anchor holes. With a
hammer or rotary drill, drill through concrete at marked locations. Drill to a minimum depth of 4". A 3/8" masonry drill bit will be
needed.
Step 5:
Place the Instrument back over the drilled out holes. Insert provided anchor bolts into aligned holes. Position anchor nut so that
it is flush with the top of the bolt. Pound anchor bolts into the hole until the anchor washer is flush with the surface mount base.
Tighten anchor bolts until they are snug. Cover remaining bolt sections with provided nut caps.
Step 6:
Verify the correct placement, levelness, and finished height of the Instrument.
Check for sufficient clearance around the Instrument, a 36" perimeter around the
1
Instrument is recommended for wheelchair accessibility.
Step 7:
If installing onto wet concrete, us the wet set anchor manufacturers guidelines
for installation procedures.
s.
FREENOTES HARMONY PARK
194 BODO DRIVE, UNIT F
DURANGO CO 81303
TEL: (970) 375-7825
FAX: (970) 247-0856
WWW.FREENOTESHARMONYPARK.COM
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
FREENOTES HARMONY PARK. ANY
REPRODUCTION IN PART OR AS A
WHOLE WITHOUT THE WRITTEN
PERMISSION OF FREENOTES HARMONY
PARK IS PROHIBITED.
13
12
DETAIL B
SCALE 1 : 6
3/8" Drill Diameter
to a Depth of 4"
Concrete Pad
24"
5/6
24"
6"
Surface Mount Installation
TITLE:
REVISION: B
SCALE: 1:16
DATE: 2/9/2018
SHEET 4 OF 4
MELD-INSTALL
DWG. NO.
Loading...