Freeman P800AJS User Manual

MODEL: P800AJS

800 AMP JUMP STARTER
AND POWER SUPPLY

HTTP://WWW.FREEMANTOOLS.COM
1-888-669-5672

PRIME GLOBAL PRODUCTS, INC.

WARNING:

Failure to follow warnings could result in
DEATH OR SERIOUS INJURY.

KEEP YOUR DATED PROOF OF PURCHASE FOR WARRENTY PURPOSE

SAVE THE MANUAL FOR FUTURE REFERENCE

P800AJS-V1 06/17

MODEL: P800AJS

MODEL: P800AJS

SYMBOLS
GENERAL SAFETY INSTRUCTIONS

4 - 5

UNPACKING

SPECIFICATIONS

FEATURES
PRODUCT LA YOUT 8
OPERATION

JUMPING A CAR

9 - 12
9 - 10

CHARGING THE CAR JUMPER
CHARGING A PHONE TABLET OR OTHER USB DEVICE

CHARGING A LAPTOP
USING THE LED LIGHT

MAINTENANCE
TROUBLESHOOTING

WARRANTIES

HTTP://WWW.FREEMANTOOLS.COM 1-888-669-567202

14 - 15

11
11

11
12
12

13

3

6
6
7

WARNING

The warnings and precautions discussed in this
manual cannot cover all possible conditions and
situations that may occur. Please be aware of
the potential hazards, and take all necessary
precautions to avoid risk of injuries.

SAVE THIS MANUAL

To avoid serious personal injury, do not attempt
to use this product until you read the manual
thoroughly and understand it completely. Save
this manual and review frequently for safe
operation and instructing others who may use
this tool. Keep this manual for the safety
warnings, precautions, operations, inspections
and maintenance information. Store this
manual and the receipt in a safe and dry place
for future reference.

SYMBOLS

In this manual, on the labels, packages and all other information provided with this tool, the following signal
words and meanings are intended to explain the levels of risk associated with this tool.

SYMBOLS

SIGNAL MEANING

WARNING:
CAUTION:
CAUTION:

HTTP://WWW.FREEMANTOOLS.COM 1-888-669-5672

Indicates a potentially hazardous situation, which, if not avoided,
could result in death or serious injury.

Indicates a potentially hazardous situation, which, if not avoided,
may result in minor or moderate injury.

(Without symbol) Indicates a situation that may result in
property damage.

03

MODEL: P800AJS

GENERAL SAFETY
INSTRUCTIONS

CALIFORNIA PROPOSITION 65

WARNING:

This product can expose you to chemi­cals, which are known to the State of
California to cause cancer and birth
defects or other reproductive harm. For
more information go to www.P65Warn­ings.ca.gov.

WORK AREA

Keep the work area clean and well lit. Cluttered

benches and dark areas increase the risk of
accidents.

Keep bystanders, children, and others away
while operating the tool. Distractions could result

in improper use of tool and cause injury.

PERSONAL SAFETY

Stay alert. Do not use tool while tired or under the

influence of drugs, alcohol, or medication. A
moment of inattention while operating the tool may
cause serious injury.

Make sure the cords are free of obstructions or
snags. Entangled or ensnared cords can cause

loss of balance or footing and may become
damaged, resulting in possible injury.
Maintain the tool with care. Keep tool clean. A
properly maintained tool, reduces the risk of a tool
malfunction.

Wash hands after handling this product or its
power cord. They may contain chemicals known

to the State of California to cause cancer and birth
defects or other reproductive harm.

TOOL USE AND CARE

Know this tool. Read manual carefully, learn its

applications and limitations, as well as the specific
potential hazards related to this tool.

Keep the tool dry, clean, and free from oil and
grease. Always use a clean cloth when cleaning.

Never use brake fluids, gasoline, petroleum-based
products, or any strong solvents to clean your tool.

MODEL: P800AJS

Do not drop or throw the tool. Dropping or
throwing the tool can result in damage that will
make the tool unusable or unsafe. If the tool has
been dropped or thrown, examine the tool closely
for bent, cracked or broken parts. If damage has
been done to tool do not use.

Never use this tool for anything other than the
application it was originally designed for.
Only use this tool for 12V vehicles. Using this

product for any other vehicle could be dangerous
for the user, vehicle, or tool.

Do not expose tool to moisture or rain.
Never open or disassemble this tool. This will

void the tools warranty.

Do not expose the tool to fire, fumes, gas, dust,
or extreme heat. This could cause harm to the

user.

Only charge this product at temperatures
between 32°F to 114°F.
Do not insert foreign objects into any inputs or
outputs.
Only use this product in a well-ventilated area.
Do not allow the teeth of the clamps to touch
while connected to the battery jumper.
Only connect the black clamp to the negative
terminal and the red clamp to the positive
terminal.

Do not expose the battery jumper to tempera­tures over 140°F. This could cause a safety

hazard to the user or others in the working area.

Always disconnect the jumper cables from the
battery jumper after use.
Do not crush, puncture, or penetrate the battery
jumper. This could cause harm to the user.
In the event that any corrosive liquid leaks out
of the battery jumper discontinue use. If any of

the corrosive liquid comes in contact with the users
skin or eyes, immediately wash with running water
and consult a doctor.

Never modify this tool in any way.
Store the tool out of reach of children or
untrained people. The tool can be dangerous in

the hands of untrained users.

Dispose of the battery jumper properly, this
battery jumper needs to be recycled. T o find your

nearest recycling facility call 1-800-822-8837.

TOOL SERVICE

Only use accessories that are identified by the
manufacturer for the specific tool model.
Use of unauthorized parts or failure to follow
maintenance instructions may create a risk of
injury.
Tool service must only be performed by a
qualified repair personnel.

HTTP://WWW.FREEMANTOOLS.COM 1-888-669-567204

HTTP://WWW.FREEMANTOOLS.COM 1-888-669-5672

05

MODEL: P800AJS

UNPACKING

This tool has been shipped completely assembled.
Carefully remove the tool and any accessories
from the box.
Inspect the tool carefully to make sure no breakage
or damage occurred during shipping.
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
tool.
If any parts are damaged or missing, please call
1-888-669-5672.

WARNING:

Do not attempt to modify this tool or
create accessories not recommended
for use with this tool. Any such alteration
or modification is misuse and could
result in hazardous conditions leading to
possible serious personal injury.

PACKING LIST

Car Jumper
Intelligent Jumper Cables
Wall Charger
Car Charger

HTTP://WWW.FREEMANTOOLS.COM 1-888-669-567206

USB Charging Cable
8 Laptop/Device Adapter Tips
Adapter Cable
Instruction Manual
Quick Start Guide
Carrying Case

SPECIFICATIONS

DIMENSIONS
WEIGHT
BATTERY CAPACITY

OUTPUT

INPUT

FULL CHARGE TIME
START CURRENT
PEAK CURRENT

OPERATING
TEMPERATURE

8.85” X 3.5” X 1.18”

1.59 lbs
18000mAh (66.6Wh)

Dual Quick Charge(5V/2.4A;
9V/2A; 12V/1.5A); 12V/10A;
19V/3.5A; 12V jump
start

Quick Charge (5V/2A;
9V/2A; 12V/1.5A)

About 4 Hours
400A
800A

-4°F to 140°F

MODEL: P800AJS

FEATURES

800 AMP LITHIUM-ION JUMP STARTER

Jump starts 12V gasoline and diesel vehicles up to
10L

18000mAh POWER BANK WITH QUICK
CHARGER

Quick charge 2.0 ports for USB 5V devices and
charging 12V/19V devices

HEAVY DUTY BATTERY CLAMPS AND 8
GAUGE CABLES

Oversized clamps and extra-long 15” jumper
cables

SMART SAFETY CONNECTION

Intelligent jump cable provides advanced jumping
protection

ULTRA-BRIGHT LED FLASHLIGHT

3 modes: Normal, Strobe, and SOS

MICRO-USB QUICK CHARGING

Fully charges in approximately 4 hours

AUTOMATIC POWER ON/OFF

HTTP://WWW.FREEMANTOOLS.COM 1-888-669-5672

07

MODEL: P800AJS

PRODUCT LAYOUT

Jump Start Socket

Power Button

Indicator

Quick Charge
Output Port

LED Flash Light

HTTP://WWW.FREEMANTOOLS.COM 1-888-669-567208

12V 10A output port

19V 3.5A output port

Quick Charge input port

MODEL: P800AJS

OPERATION

JUMPING A CAR

1.

Insert the smart safety connector plug into the jump
starter. The jump starter should automatically
power on. If it does not, press the power button on
the jump starter.

2.

Make sure the vehicle key is in the “OFF” position.
For push-to-start vehicles, make sure the vehicle is
in completely "OFF" before jump starting. Then
locate the positive and negative battery terminals.
The positive is normally labeled with a (+) and/or
red coloring. Connect the red clamp to the positive

HTTP://WWW.FREEMANTOOLS.COM 1-888-669-5672 09

terminal and the black clamp to the negative
terminal of the vehicle battery.

Red

Black

3. Check the lights on the smart safety connector.
GREEN LIGHT ON:
The clamps are placed in the correct position and
the circuit is completed. Jump start the vehicle
within 30 seconds.
GREEN LIGHT BLINKING WITH BUZZING:
The vehicle battery is low. Press the “BOOST”
button, wait until the GREEN LIGHT becomes
solid, then turn on the engine within 30s.
RED LIGHT ON WITH BUZZING:
The clamps are clamped on to the incorrect
terminals. Reconnect the clamps to the correct
terminals, wait till the GREEN LIGHT is on, then
turn

MODEL: P800AJS

on the engine.
NO LIGHTS ON AND NO BUZZING:
The battery may be to low. Make sure the clamps
are connected correctly, press the “BOOST” button
and wait for the GREEN LIGHT to come on. If the
light does come on, turn on the engine within 30s.
If the light does not come on, take the vehicle to a

certified mechanic or consult the owner’s manual.

Boost Button

Reverse Light

4.

Start the car engine. If after 3 seconds engine does
not start, turn key to “OFF” position. Detach the car
jumper clamps, then restart steps 1-4.

Correct Light

5.

Remove the clamps from the battery terminals.

6.

Unplug the cable plug from the jump starter.

MODEL: P800AJS

CHARGING THE CAR JUMPER

1.

Plug wall charger/car charger cable into the wall/
car input. Then plug the cable into the input port of
the car jumper. The light indicator should start to
blink while the jumper is being charged.

CHARGING A PHONE, TABLET, OR
OTHER USB DEVICES

1.

Plug the USB cable into the USB output on the
jump starter. Then insert charging cable into the
device that needs to be charged. Press the power
button on your jump starter and the device will
begin to charge.

CHARGING A LAPTOP OR OTHER
DEVICE

1.

The car jumper comes with 8 adapter tips and an
adapter cable to charge 19V and 12V devices. The
car jumper also has two outputs (12V and 19V).

Check the device’s voltage and current output

rating and plug the adapter into the appropriate
output. Then choose the appropriate tip that
matches the input of your device and plug it in.
Turn on the car jumper and the device will will start
to charge.

HTTP://WWW.FREEMANTOOLS.COM 1-888-669-567210

HTTP://WWW.FREEMANTOOLS.COM 1-888-669-5672 11

MODEL: P800AJS

USING THE LED LIGHT

1.

Hold power button until the LED light powers on.
Press power button to cycle through the different
light modes (normal, strobe, SOS, and off).

Power Button

CLEANING

Clean the entire tool with a cotton rag after each use.
Avoid using solvents when cleaning plastic parts.
Most plastics are susceptible to damage from various
types of commercial solvents and maybe damaged by
their use. Use clean cloths to remove dirt, dust, oil,
grease, etc.

MODEL: P800AJS

TROUBLESHOOTING

WARNING:

Stop using tool immediately if any of the following problems occur. Serious personal injury
could result. Any repairs or replacements must be done by a qualified service person or an
authorized service center.

MAINTENANCE

WARNING:

Make sure to charge the car jumper after
it is used. Charge the product every 3-6
months in order to prolong the battery
life.

HTTP://WWW.FREEMANTOOLS.COM 1-888-669-567212

WARNING:

Do not let brake fluids, gasoline,
petroleum-based products, penetrating
oils, etc. come in contact with plastic
parts. Chemicals can damage, weaken
or destroy plastic which may result in
serious personal injury.

ISSUE POSSIBLE CAUSE(S) CORRECTIVE ACTIONS

Car will not jump
after following all
of the necessary
steps

Check error lights.
The battery may be damaged.

The vehicle’s battery may not be

the issue.
The car jumper is not powered
on.
The car jumper cables do not
have a good connection.
Vehicle was not in PARK.
Car jumper does not have
enough charge.
Battery terminals are dirty.

HTTP://WWW.FREEMANTOOLS.COM 1-888-669-5672 13

Refer to step 3 under the “JUMPING A CAR”
section of the manual.

Replace the car’s battery.
Refer to your vehicle owner’s manual or have the

car taken to a certified mechanic to determine the
issue.
The car jumper will power off if you do not try to
start the car within 30 seconds of powering on
the jumper. If it is off turn the jumper on.
Ensure the cable clamps have maximum
connection on both sides of each clamp.
Place the car in PARK, some vehicles cannot be
started when not in the PARK setting.
Charge your car jumper.
Clean battery terminals to provide a better
connection.

MODEL: P800AJS

PGP INC. PRODUCT WARRANTIES

Professional 1-Year Limited Warranty

The Freeman Tool limited warranty extends exclusively to the original purchaser of the Freeman Product, begins
on the date of purchase. During the warranty period Prime Global Products, Inc. (PGP) expressly warrants that
the Freeman Product is free from defect in materials and workmanship subject to the exceptions and limitations
contained herein. PGP shall at its option, repair, replace, or offer a full refund for a Freeman Product that has a
defect in materials or workmanship.

A DATED SALES RECEIPT OR PROOF OF PURCHASE FROM THE ORIGINAL RETAIL PURCHASER IS
REQUIRED TO MAKE A WARRANTY CLAIM. Warranty registration is also required and can be accomplished
through On-Line Product Registration at www.primeglobalproducts.com, select SUPPORT, select PRODUCT
REGISTRATION. To make a warranty claim, the original purchaser must return the Freeman Tool, postage
prepaid and insured, with proof of purchase to PGP or any of its authorized service centers. For questions please
call 1-888-669-5672. Other than the postage and insurance requirement, no charge will be made for repairs
covered by this warranty.

HTTP://WWW.FREEMANTOOLS.COM 1-888-669-567214

MODEL: P800AJS

Warranty Exclusions

These Warranties do not apply where:

Repairs or alterations have been made, or attempted, by others, and/or the unauthorized use of non-conform­ing parts or accessories.
Repairs are required due to normal wear and tear.
The Tool has been abused, misused, improperly maintained or operated, including: the failure to use clean,
dry, regulated compressed air at the recommended pressure; accidents caused by use of the Freeman
Product after partial failure.
The Freeman Product is used commercially in assembly lines or production lines. The Freeman Product is
intended for use by individuals and these warranties do not extend to such commercial uses.

NO WARRANTY, ORAL OR WRITTEN, EXPRESSED OR IMPLIED, OTHER THAN THE ABOVE WARRAN­TIES IS MADE WITH REGARD TO THIS FREEMAN PRODUCT. ANY IMPLIED WARRANTIES WILL BE
LIMITED IN DURATION T O THE APPLICABLE W ARRANTY PERIOD SPECIFIED ABOVE. SOME STATES DO
NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE MAY NOT
APPLY TO YOU. YOUR REMEDIES ARE SOLELY AND EXCLUSIVELY AS STATED ABOVE. PGP SHALL IN
NO EVENT BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, OR SPECIAL DAMAGES. SOME
STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. IN NO EVENT,
WHETHER AS A RESULT OF A BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE)

OR OTHERWISE, SHALL PGP’S LIABILITY EXCEED THE PRICE OF THE PRODUCT WHICH HAS GIVEN

RISE TO THE CLAIM OR LIABILITY. ANY LIABILITY CONNECTED WITH THE USE OF THIS PRODUCT
SHALL TERMINATE UPON THE EXPIRATION OF THE WARRANTY PERIOD SPECIFIED ABOVE. NO
EMPLOYEE OR REPRESENTATION OF PGP, OR ANY DISTRIBUTOR OR DEALER IS AUTHORIZED TO
MAKE ANY CHANGE OR MODIFICATION OF THIS WARRANTY.

These warranties give you specific legal rights. You may also have other rights which vary from state to state.

HTTP://WWW.FREEMANTOOLS.COM 1-888-669-5672

15