Freeman P36VCMSK, P36VCS User Manual

MODEL: P36VCMSK

3.6V CORDLESS MINI
SCREWDRIVER KIT WITH
INTERCHANGEABLE
ATTACHMENTS

• HTTP://WWW.FREEMANTOOLS.COM

• 1-888-669-5672

• PRIME GLOBAL PRODUCTS, INC.

HTTP://WWW.FREEMANTOOLS.COM
1-888-669-5672
PRIME GLOBAL PRODUCTS, INC.

WARNING:

Failure to follow warnings could result in
DEATH OR SERIOUS INJURY.

Save the manual for future reference. keep
your dated proof of purchase for warranty
purpose.

P36VCMSK-V1 04/19

MODEL: P36VCMSK MODEL: P36VCMSK

SYMBOLS
GENERAL SAFETY INSTRUCTIONS
UNPACKING
PACKING LIST
FEATURES
SPECIFICATIONS
OPERATION

CHARGING THE BATTERY
ASSEMBLE / DISMANTLE THE ATTACHMENT
SWITCHING ON / OFF
DIRECTION OF ROTATION SWITCH

(FORWARD / REVERSE / CENTER LOCK)
LED LIGHTS

MAINTENANCE
WARRANTIES

NOTES

3

3 - 4

4
5
5
5

5 - 6

5
5

6

6

6
6
7

23

WARNING

The warning and precautions discussed in this manual cannot cover all possible conditions and
situations that may occur. Please be aware of the potential hazards and take all necessary
precautions to avoid risk of injuries.

SAVE THIS MANUAL

Keep this manual for the safety warnings,
precautions, operations, inspections, and
maintenance information. Store this manual
and the receipt in a safe and dry place for
future reference.

WARNING:

To avoid serious personal injury, do not
attempt to use this product until you read
the manual thoroughly and understand it
completely. Save this manual and review
it frequently for safe operation and
instructing others who may use this tool.

SYMBOLS

In this manual, on the labels, packages and all other information provided with this tool, the
following signal words and meanings are intended to explain the levels of risk associated with this
tool.

SYMBOLS

GENERAL SAFETY
INSTRUCTIONS

CALIFORNIA PROPOSITION 65

WARNING:

This product can expose you to
chemicals including lead, which is known
to the State of California to cause cancer
and other birth defects or otherreproduc­tive harm. For more information go to
www.P65Warnings.ca.gov.

WORK AREA SAFETY

Keep the work area clean and well lit.

•

Cluttered benches and dark areas increase
the risk of accidents.

Do not operate the tool in explosive

•

atmospheres, such as in the presence of
flammable liquids, gases or dust. The tool

could create a spark which may ignite
flammable liquids, gases or dust.

Keep bystanders, children, and others

•

away while operating the tool. Distractions

could result in improper use and cause injury.

Always Keep proper footing and balance.

•

Proper footing and balance enable better
control of the tool in unexpected situations.

Do not use on a ladder or unstable

•

supports. Stable footing on a solid surface

enables better control of the tool in unexpect­ed situations.

SIGNAL MEANING

WARNING:

CAUTION:

CAUTION:

Indicates a potentially hazardous situation, which, if not avoided,
could result in death or serious injury.

Indicates a potentially hazardous situation, which, if not avoided,
may result in minor or moderate injury.

(Without symbol) Indicates a situation that may result in
property damage.

PERSONAL SAFETY

Always wear eye protection. Operator and

•

others in the work area should always wear
ANSI-Z87.1 approved safety goggle with side
shields. Eye protection is used to guard
against flying debris, which may cause severe
eye injury.

Always use hearing protection when using

•

the tool. Prolonged exposure to high

intensity noise may cause hearing loss.

Dress properly. Do not wear loose clothing

•

or jewelry. Keep your hair, clothing, and
gloves away from moving parts. Loose
clothes, jewelry, or long hair can be caught in
moving parts.

Stay alert. Do not use tool while tired or

•

under the influence of drugs, alcohol, or
medication. A moment of inattention while
operating the tool may cause serious injury.

Avoid prolonged use. The tool’s repetitive

•

motion and vibration can cause harm to your
hands or arms. The user can use gloves for
extra cushion, take frequent breaks and limit
daily use to prevent this issue.

This tool vibrates with use. Continuous

•

operation can be harmful to your hands and
arms. Stop using the tool if you feel tingling or
pain. Resume work after recovery. Seek
medical advice if serious symptoms occur.

Make sure there are no hidden electrical

•

cables, gas pipes, etc. while working on the

work piece. These hazards could harm the
user if damaged while using this tool.

Wash hands after handling this product or

•

its power cord. They may contain chemicals

known to the State of California to cause
cancer and birth defects or other reproduc­tive harm.

02

HTTP://WWW.FREEMANTOOLS.COM 1-888-669-5672

HTTP://WWW.FREEMANTOOLS.COM 1-888-669-5672

03

MODEL: P36VCMSK MODEL: P36VCMSK

Do not use the tool if the trigger does not

ELECTRICAL SAFETY

The charger’s power plug must match the

•

outlet. Never modify the plug or try to plug

the tool into an outlet that does not match
the plug.

Avoid contact with grounded elements

•

such as metal tables, pipes, ranges or
refrigerators. Contact with these elements

can put you at risk of electrical shock.

When operating the tool keep tool away

•

from wet conditions. Wet tools can cause

electrical shock.

Always inspect electrical cord for damage

•

before and after use. A damaged cord can

cause electrical shock.

TOOL CARE AND USE

Know this tool. Read this manual carefully,

•

learn its applications and limitations, as well
as the specific potential hazards related to
this tool.

Always have a firm footing and grip on the

•

tool to counteract any force that may be
enacted during the operation of the tool.
Practice safe working practices and

•

ensure all relevant legal requirements are
being followed when using this tool.
The tool should not be forced, use the
correct tool for your application. The

correct tool will do the job better and safer at
the rate for which the tool is being used.

Before adjusting, changing accessories, or

•

storing the tool disconnect the tool from
the battery. This will reduce the risk of injury

from the power tool.

Check for misalignment or binding of

•

moving parts, breakage of parts and any
other condition that may affect the tool’s
operation. If damaged, have the tool serviced

before using.

Many accidents are caused by poorly

•

maintained tools. Maintain tool with care. A

properly maintained tool will function more
smoothly and prevent binding, making it
easier to use.

Do not use the tool for anything other than

•

its intended use.

•

actuate properly. Any tool that cannot be

controlled with the trigger is dangerous and
must be repaired.

Keep the tool and its handle dry, clean

•

and free of oil and grease. Always use a

clean cloth when cleaning. Never use brake
fluids, gasoline, petroleum-based products,
or any strong solvents to clean your tool.

Never use gasoline or other flammable

•

liquids to clean the tool. Never use the tool

in the presence of flammable liquids or
gases. Vapors could ignite by a spark and
cause an explosion which will result in death
or serious injury.

Do not use the tool as a hammer.

•

Never press the trigger of the tool when it

•

is not intended to be used.
Do not drop or throw the tool. Dropping or

•

throwing the tool can result in damage that
will make the tool unusable or unsafe. If the
tool has been dropped or thrown, examine
the tool closely for bent, cracked or broken
parts. STOP and repair before using or
serious injury could occur.

TOOL SERVICE

Only use accessories that are identified

•

by the manufacturer for the specific tool
model.
Use of unauthorized parts or failure to

•

follow maintenance instructions may
create a risk of injury.
Tool service must only be performed by a

•

qualified repair personnel.

UNPACKING

• This tool has been shipped completely
assembled.

• Carefully remove the tool and any accesso­ries from the box.

• Inspect the tool carefully to make sure no
breakage or damage occurred during
shipping.

• Do not discard the packing material until you
have carefully inspected and satisfactorily
operated the tool.

• If any parts are damaged or missing, please
call 1-888-669-5672.

PACKING LIST

• Cordless screwdriver

• 25pc 1” screwdriver bits

• 2” Flat bit

• 2” Philip bit

• Bit extension

• Torque attachment

• Eccentric attachment

• Angle attachment

• Cutting attachment

• Charger

• Tool carrying bag

• Instruction manual

FEATURES

• 5-in-1 Design

• Lithium-Ion Rechargeable Battery

• An Assortment Of 28pc Driver Kits

• LED Work Light

SPECIFICATIONS

Charging Input
Battery Capacity
Max. Torque
Charging Time

100-240V, 50/60Hz
1,500mAh
35 in-lb
60 min

OPERATION

CHARGING THE BATTERY

• To charge the tool, connect the charger to
the correct power source.

• Connect the charger to the charging socket
on the device.

• The battery is fully charged when the battery
indicator changes from red to green.

ASSEMBLE / DISMANTLE
THE ATTACHMENT

Before removing or installing the attachments,
ensure the rotation direction switch is in the
neutral middle position. This prevents
unintentional rotating.

Assemble the attachment:

1. 2.Remove the rubber cap from the
tool holder.
Place the desired attachment on the tool
and push to lock it into place.

04 05

HTTP://WWW.FREEMANTOOLS.COM 1-888-669-5672

HTTP://WWW.FREEMANTOOLS.COM 1-888-669-5672

MODEL: P36VCMSK MODEL: P36VCMSK

Dismantle the attachment:

To remove the attachment from the tool,

1.
press the lock button and turn the attach­ment in the opposite direction of the arrow.
Pull the attachment off of the tool.
Replace the rubber cap on the tool holder.

2.

SWITCHING ON/OFF

• To start the appliance, press the ON/OFF
switch and keep it pressed in.

• Release the ON/OFF switch to switch off the
appliance.

DIRECTION OF ROTATION SWITCH
(FORWARD / REVERSE / CENTER
LOCK)

• Set the rotation direction switch in the OFF
(Center lock) position to lock the trigger and
help prevent accidental starting when not in
use.

• Push the direction of rotation switch to the
left of the trigger for forward operation. Push
the switch to the right to reverse the direction.

• The tool will not run unless the direction of
rotation selector is pushed fully to the left or
right.

LED LIGHTS

The LED lights will illuminate when the trigger
is depressed. The time-out feature will
automatically shut off the lights when the tool
is not in use.

MAINTENANCE

Avoid using solvents when cleaning plastic
parts. Most plastics are susceptible to damage
from various types of commercial solvents and
maybe damaged by their use. Use clean cloth
to remove dirt, dust, oil,
grease, etc.

WARRANTIES

PGP INC. PRODUCT WARRANTIES

Professional 1-Year Limited Warranty

The Freeman tool limited warranty extends exclusively to the original purchaser of the Freeman
product, begins on the date of purchase. During the warranty period Prime Global Products, Inc.
(PGP) expressly warrants that the Freeman product is free from defect in materials and workman­ship subject to the exceptions and limitations contained herein. PGP shall at its option, repair,
replace, or offer a full refund for a Freeman product that has a defect in materials or workmanship.
A DATED SALES RECEIPT OR PROOF OF PURCHASE FROM THE ORIGINAL RETAIL PURCHAS­ER IS REQUIRED TO MAKE A WARRANTY CLAIM. Warranty registration is also required and can
be accomplished through On-Line Product Registration at www.freemantools.com, select
PRODUCT REGISTRATION. To make a warranty claim, the original purchaser must return the
Freeman tool, postage prepaid and insured, with proof of purchase to PGP or any of its authorized
service centers. For questions please call 1-888-669-5672. Other than the postage and insurance
requirement, no charge will be made for repairs covered by this warranty.

Warranty Exclusions

These Warranties do not apply where:
Repairs or alterations have been made, or attempted, by others, and/or the unauthorized

•

use of non-conforming parts or accessories.
Repairs are required due to normal wear and tear.

•

The Tool has been abused, misused, improperly maintained or operated, including: the

•

failure to use clean, dry, regulated compressed air at the recommended pressure;
accidents caused by use of the Freeman product after partial failure.
The Freeman product is used commercially in assembly lines or production lines. The

•

Freeman product is intended for use by individuals and these warranties do not extend
to such commercial uses.

NO WARRANTY, ORAL OR WRITTEN, EXPRESSED OR IMPLIED, OTHER THAN THE ABOVE
WARRANTIES IS MADE WITH REGARD TO THIS FREEMANPRODUCT. ANY IMPLIED WARRAN­TIES WILL BE LIMITED IN DURATION TO THE APPLICABLE WARRANTY PERIOD SPECIFIED
ABOVE. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY
LASTS, SO THE ABOVE MAY NOT APPLY TO YOU. YOUR REMEDIES ARE SOLELY AND
EXCLUSIVELY AS STATED ABOVE. PGP SHALL IN NO EVENT BE LIABLE FOR INCIDENTAL,
CONSEQUENTIAL, INDIRECT, OR SPECIAL DAMAGES. SOME STATES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. IN NO EVENT, WHETHER AS A RESULT
OF A BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE,
SHALL PGP’S LIABILITY EXCEED THE PRICE OF THE PRODUCT WHICH HAS GIVEN RISE TO
THE CLAIM OR LIABILITY. ANY LIABILITY CONNECTED WITH THE USE OF THIS PRODUCT
SHALL TERMINATE UPON THE EXPIRATION OF THE WARRANTY PERIOD SPECIFIED ABOVE.
NO EMPLOYEE OR REPRESENTATION OF PGP, OR ANY DISTRIBUTOR OR DEALER IS
AUTHORIZED TO MAKE ANY CHANGE OR MODIFICATION OF THIS WARRANTY.

All matters related to the sale and/or use of the Freeman Product that is the subject of these
limited warranties, along with the construction and enforcement of the terms of these limited
warranties themselves, shall be subject to the laws of the state of Georgia. Any dispute arising out
of the sale and/or use of the Freeman Product that is the subject of these limited warranties shall
be brought in Cherokee County, Georgia. Purchase and/or use of the Freeman Product, makes you
subject to the benefits and limitations of these limited warranties.

THESE WARRANTIES ARE SUBJECT TO CHANGE WITHOUT NOTICE.

06 07

HTTP://WWW.FREEMANTOOLS.COM 1-888-669-5672

HTTP://WWW.FREEMANTOOLS.COM 1-888-669-5672