Freedom Zed Shelf Assembly Instruction

Zed Shelf (for Zed Desk & Zed Return)

Before you begin to assemble your piece of furniture, please check to ensure that all parts have been supplied.

Follow instructions closely as deiation from them may void your warrantly and present a possible safety risk.

It is recommended that assembly is done on a soft surface like carpet to avoid any damage.

If you experience any problems with your new purchase please phone our Customer Service Hotline [phone]
(Customers outside Australia should contact their closest Freedom store.)

Care Information:
Peroidically check and re-tighten any fasteners. Wipe down all surfaces surfaces with weekly with a clean cloth.
Do not clean any harsh abrasives or chemicals.
Clean Galss using a recognised glass cleaning product. Avoid any overspray. Although Tempered Glass is stronger than
normal galss it must still be treated with care.

Hardware

6 X Part A

2 X Part E

Parts

1 X Part G (Left Side)

4 X Part B

4 X Part F

1 X Part C

1 X Part H (Right Side)

1 X Part D

2 X Part I

Page 1

1 X Part J (Desk Glass)

Zed Shelf (for Zed Desk & Zed Return)

Part G (Left Side)

Step 1.

- Attach the Centre Rods to the
Left and Right Sides using the Shoulder bolt.

Part B

Part E

Part I

Part H (Right Side)

Part A

Step 2.

- Gently remove the table glass and
store it in a safe place.

-Remove the shoulder bolt from the
already assembled frame.

Part F

Part C

If you are attaching the Zed
Shelf to a table assembled
with a Zed Corner Shelf - use
the Washer provided.See the

diagram for washer positioning.

-Attach the Shelf Sides to the frame with
the bolts.

-Using the Grub Screws tighten the
Bracket onto the top of the table frame.

This will stop the Shelf from rocking.

Finished :

Page 2