Freedom Zed Hanging Unit 2 Drawer Assembly Instruction

Zed Hanging Unit 2 Drawer
Before you begin to assemble your piece of furniture, please check to ensure that all parts have been supplied.
Follow instructions closely as deiation from them may void your warrantly and present a possible safety risk.
It is recommended that assembly is done on a soft surface like carpet to avoid any damage.
If you experience any problems with your new purchase please phone our Customer Service Hotline 1800 807 416 (Customers outside Australia should contact their closest Freedom store.)
Care Information: Peroidically check and re-tighten any fasteners. Wipe down all surfaces surfaces with weekly with a clean cloth. Do not clean any harsh abrasives or chemicals.
Hardware
8 X Part A 4 X Part B 8 X Part C 1 X Part D 1 X Part E
Parts
1 X Part G
1 X Part H(LH Mounting Bracket)
2 X Part F
1 X Part I(RM Mounting Bracket)
Page 1
1 X Part J
Step1.
- If the Desk is already assembled, carefully remove the desk top.
- Fit the Part H and Part I and the Small Brackects to the top rails of the desk.
- Secure the Brackets using the Part A and Part C. Lightly tighten the bolts using Part D whilst holding Part C using Part E.
Zed Hanging Unit 2 Drawer
Step 2.
- Secure the File Assembly to the LH & RH Brackets using the Large Bolts.
- Tighten all Bolts completely using the Part D.
Step 3.
- Carefully fit the top back on the desk.
Page 2
Loading...