Freedom Zed Corner Assembly Instruction

Before you begin to assemble your piece of furniture, please check to ensure that all parts have been supplied.

Follow instructions closely as deiation from them may void your warrantly and present a possible safety risk.

It is recommended that assembly is done on a soft surface like carpet to avoid any damage.

If you experience any problems with your new purchase please phone our Customer Service Hotline [phone]
(Customers outside Australia should contact their closest Freedom store.)

Care Information:

Peroidically check and re-tighten any fasteners. Wipe down all surfaces surfaces with weekly with a clean cloth.

Do not clean any harsh abrasives or chemicals.

Clean Galss using a recognised glass cleaning product. Avoid any overspray. Although Tempered Glass is stronger than

normal galss it must still be treated with care.

Hardware

Zed Corner

7 X Part A 4 X Part B

Parts

1 X Part D 1 X Part E

1 X Part C

The Zed Corner is used to join together:

- two desks

- one desk and one return

- two returns

Step 1.
Remove all Glass Tops.
Remove Shoulder bolts as shown in
diagram.

Page 1

Part B

Zed Corner

Step 2.
line Part D up with the holes in the tables.
Using the 4 Part B attached Part D to the table.

Part E

Finished :

Part A

Step 3.
Insert the 7 Part A into the holes on the
top of the corner.
Carefully locate the Part E onto
assembled desk.

Page 2