Freedom Willis Bed Assembly Instruction
Assembly Instructions
Willis Bed
Before you begin to assemble your new piece of furniture, please check to ensure that all parts have been supplied.
Follow instructions closely as deviation from them may void your warranty and present a possible safety risk.
It is recommended that assembly is done on a soft surface like carpet to avoid any damage.
If you experience any problems with your new purchase please phone our Customer Service Hotline 1800 807 416 (Customers
outside Australia should contact their closest Freedom store.)
Care Information
Periodically check and re-tighten any fasteners. Wipe down all surfaces weekly with a clean cloth. Do not clean any surfaces with
harsh abrasives or chemicals.
Refer to attached care label for detailed information on upholstery maintenance.
Hardware
Parts
M6*55mm / 8xPart A
M4 / 1xPart F
1xPart I
M6*22mm / 8xPart B
M5 / 1xPart G
16xPart C
1xPart H
8xPart D
M8*40mm / 8xPart A1
These hardware are affixed to the headboard and foot.
M6*20mm / 8xPart E
8xPart C1
1xPart L
8xPart D1
Page 1
2xPart K
2xPart M
2xPart K
1xPart J
Assembly Instructions
Willis Bed
Step: 1
I
Step: 2
A1
D1
C1
G
A1
D1
C1
G
J
THESE PARTS ARE ALREADY AFFIXED
INTO HEADBOARD AND FOOTBOARD!!
Page 2
G
K
K
DO NOT TIGHTEN BOLTS
UNTIL COMPLETELY ASSEMBLED!!
Loading...