Freedom Vibe King Single Bed Assembly Instruction
VIBE KING SINGLE
( V- BKS )
Before you begin to assemble your new piece of furniture please check to ensure all parts and fittings have been supplied. Follow all
instructions closely as deviation from them may void warranty and present possible safety risk. It is recommended that assembly is done on a
soft surface, like carpet, to avoid damage. CARE INSTRUCTIONS: Periodically re-tighten all fasteners. TOOLS REQUIRED: Allen key (provided),
screwdriver and hammer. Some packs may come with timber of a different colour to the model purchased. These pieces are for packing
purposes only.
If you experience any problems with your new purchase please phone our Customer Service staff on FREE CALL
PHONE / FAX) 1800 029 715
Please keep last page of the instruction for warranty information.
CLEANING AND MAINTENANCE: Do not use solvent or alcohol based cleaners on this unit. To clean unit, we recommend using a
warm damp cloth to wipe over surfaces.
PARTS CHECKLIST
D
C
A
B
K
D
G
H
E
F
CODE: V-BKS
MADE IN AUSTRALIA BY KD CONCEPTS
PAGE 1 OF 8
STEP 1: PREPARE LEFT AND RIGHT SIDES
51-474
x 4
50-128
x 16
A
H
STEP 2: ADD RAILS TO LEFT AND RIGHT SIDES
50-153
x 14
DETAIL A
CODE: V-BKS
J
MADE IN AUSTRALIA BY KD CONCEPTS
PAGE 2 OF 8
STEP 3: PREPARE CENTRE PANEL
50-015
x 4
50-422
x 6
A
STEP 4: PREPARE END RAIL
50-128
x 8
51-474
x 2
B
E
CODE: V-BKS
NOTE DIRECTION
OF BRACKET ON RAIL
MADE IN AUSTRALIA BY KD CONCEPTS
DETAIL B
PAGE 3 OF 8
Loading...